Decomposition of the Shear Capacity of Steel Fiber–Reinforced Concrete Coupling Beams
Publication: Journal of Structural Engineering
Volume 147, Issue 11
Abstract
Steel fiber–reinforced concrete (SFRC) is extensively used in coupling beams due to its superior mechanical properties. In this study, the two-parameter kinematic theory is modified by introducing the consideration of the critical crack angle and longitudinal reinforcement strain. The modified method is validated by 64 sets of experimental coupling beams in the literatures, and the predicted shear capacities are found to have good agreement with the test results. Moreover, the decomposition of the shear capacity provided by steel fibers, stirrups, the critical loading zone, aggregate interlock, and the dowel action of the longitudinal reinforcement can be evaluated separately. Thus, the effects of the span-to-depth ratio, volume fractions of fibers, and stirrup ratios on the shear capacity are investigated. Additionally, the equivalent substitution relationship between stirrups and steel fibers is quantified, which provides a solution to the reduction of the density of stirrups in coupling beams and similar components.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
This work was supported by the Shanghai Science and Technology Innovation Project (Grant No. 2017-01-07-00-07-E00006) and the National Natural Science Foundation of China (Grant Nos. 51538010 and 51678439).
References
AASHTO. 2007. AASHTO LRFD bridge design specifications. 4th ed. Washington, DC: AASHTO.
Abaza, O. A., and Z. S. Hussein. 2014. “Flexural behavior of flat-end steel-fiber-reinforced concrete.” J. Mater. Civ. Eng. 26 (8): 04014034. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001015.
ACI (American Concrete Institute). 2011. Building code requirements for structural concrete and commentary. ACI 318-11. Farmington Hills, MI: ACI.
Barney, G. B., K. N. Shiu, B. G. Rabbat, A. E. Fiorato, H. G. Russell, and W. G. Corley. 1978. Earthquake resistant structural walls-tests of coupling beams. Skokie, IL: Portland Cement Association.
Bentz, E. C., F. J. Vecchio, and M. P. Collins. 2006. “Simplified modified compression field theory for calculating shear strength of reinforced concrete elements.” ACI Mater. J. 103 (4): 614–624.
Breña, S. F., and O. Ihtiyar. 2011. “Performance of conventionally reinforced coupling beams subjected to cyclic loading.” J. Struct. Eng. 137 (6): 665–676. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000316.
Cai, G., J. Zhao, H. Degée, and B. Vandoren. 2016. “Shear capacity of steel fibre reinforced concrete coupling beams using conventional reinforcements.” Eng. Struct. 128 (1): 428–440. https://doi.org/10.1016/j.engstruct.2016.09.056.
Canbolat, B. A., G. J. Parra-Montesinos, and J. K. Wight. 2005. “Experimental study on seismic behavior of high-performance fiber-reinforced cement composite coupling beams.” ACI Struct. J. 102 (1): 159–166.
Collins, M. P., and D. Mitchell. 1987. Prestressed concrete basics. Ottawa: Canadian Prestressed Concrete Institute.
Deluce, J. R., S. C. Lee, and F. J. Vecchio. 2014. “Crack model for steel fiber-reinforced concrete members containing conventional reinforcement.” ACI Struct. J. 111 (1): 93–102.
Ding, R., M. X. Tao, J. G. Nie, and Y. L. Mo. 2016. “Shear deformation and sliding-based fiber beam-column model for seismic analysis of reinforced concrete coupling beams.” J. Struct. Eng. 142 (7): 04016032. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001478.
El-Tawil, S., K. A. Harries, P. J. Fortney, B. M. Shahrooz, and Y. Kurama. 2010. “Seismic design of hybrid coupled wall systems: State of the art.” J. Struct. Eng. 136 (7): 755–769. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000186.
Eom, T. S., H. G. Park, and S. M. Kang. 2009. “Energy-based cyclic force–displacement relationship for reinforced concrete short coupling beams.” Eng. Struct. 31 (9): 2020–2031. https://doi.org/10.1016/j.engstruct.2009.03.008.
Feng, D. C., G. Wu, and C. L. Ning. 2019. “A regularized force-based Timoshenko fiber element including flexure-shear interaction for cyclic analysis of RC structures.” Int. J. Mech. Sci. 160 (Sep): 59–74. https://doi.org/10.1016/j.ijmecsci.2019.06.011.
Feng, D. C., G. Wu, Z. Y. Sun, and J. G. Xu. 2017. “A flexure-shear Timoshenko fiber beam element based on softened damage-plasticity model.” Eng. Struct. 140 (Jun): 483–497. https://doi.org/10.1016/j.engstruct.2017.02.066.
Feng, D. C., and J. Xu. 2018. “An efficient fiber beam-column element considering flexure–shear interaction and anchorage bond-slip effect for cyclic analysis of RC structures.” Bull. Earthquake Eng. 16 (11): 5425–5452. https://doi.org/10.1007/s10518-018-0392-y.
Fortney, P. J., B. M. Shahrooz, and G. A. Rassati. 2006. “The next generation of coupling beams.” In Composite construction in steel and concrete V, 619–630. Reston, VA: ASCE. https://doi.org/10.1061/40826(186)58.
Foster, S. J., and J. Voo. 2003. Variable engagement model for fibre reinforced concrete in tension. Sydney, Australia: Univ. of New South Wales.
Galano, L., and A. Vignoli. 2000. “Seismic behavior of short coupling beams with different reinforcement layouts.” ACI Struct. J. 97 (6): 876–885.
Gong, B., and B. M. Shahrooz. 2001. “Concrete-steel composite coupling beams. II: Subassembly testing and design verification.” J. Struct. Eng. 127 (6): 632–638. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:6(632).
Gong, B. N., and E. H. Fang. 1988. “Behavior of reinforced concrete coupling beams between shear walls under cyclic loading.” [In Chinese.] J. Build. Struct. 9 (1): 34–41.
Harries, K. A. 2001. “Ductility and deformability of coupling beams in reinforced concrete coupled walls.” Earthquake Spectra 17 (3): 457–478. https://doi.org/10.1193/1.1586184.
Harries, K. A., B. Gong, and B. M. Shahrooz. 2000. “Behavior and design of reinforced concrete, steel, and steel-concrete coupling beams.” Earthquake Spectra 16 (4): 775–799. https://doi.org/10.1193/1.1586139.
Honarparast, S., and O. Chaallal. 2019. “Non-linear time history analysis of reinforced concrete coupled shear walls: Comparison of old design, modern design and retrofitted with externally bonded CFRP composites.” Eng. Struct. 185 (Apr): 353–365. https://doi.org/10.1016/j.engstruct.2019.01.113.
Huang, Z. H., X. L. Lu, and Y. Zhou. 2009. “Deformation capacity and performance-based seismic design for reinforced concrete coupling beams.” [In Chinese.] Struct. Eng. 25 (5): 13–18. https://doi.org/10.1016/j.engstruct.2018.11.066.
Khalifa, E. S. 2014. “Analytical model for steel fiber concrete composite short-coupling beam.” Composites, Part B 56 (Jan): 318–329. https://doi.org/10.1016/j.compositesb.2013.08.050.
Kuang, J. S., and B. J. Bączkowski. 2009. “Steel-fibre-reinforced concrete coupling beams subjected to monotonic loading.” Mag. Concr. Res. 61 (1): 35–41. https://doi.org/10.1680/macr.2008.00019.
Kwan, A. K. H., and Z. Z. Zhao. 2002. “Cyclic behaviour of deep reinforced concrete coupling beams.” Proc. Inst. Civ. Eng. Build. 152 (3): 283–293. https://doi.org/10.1680/stbu.2002.152.3.283.
Lee, H. J., D. A. Kuchma, W. Baker, and L. C. Novak. 2008. “Design and analysis of heavily loaded reinforced concrete link beams for Burj Dubai.” ACI Struct. J. 105 (4): 451–459.
Lee, S. C., J. Y. Cho, and F. J. Vecchio. 2011a. “Diverse embedment model for steel fiber-reinforced concrete in tension: Model development.” ACI Mater. J. 108 (5): 516–525.
Lee, S. C., J. Y. Cho, and F. J. Vecchio. 2011b. “Diverse embedment model for steel fiber-reinforced concrete in tension: Model verification.” ACI Mater. J. 108 (5): 526–535.
Lee, S. C., J. Y. Cho, and F. J. Vecchio. 2013. “Simplified diverse embedment model for steel fiber-reinforced concrete elements in tension.” ACI Mater. J. 110 (4): 403–412.
Lee, S. C., J. H. Oh, and J. Y. Cho. 2015. “Compressive behavior of fiber-reinforced concrete with end-hooked steel fibers.” Materials 8 (4): 1442–1458. https://doi.org/10.3390/ma8041442.
Lequesne, R. D. 2011. “Behavior and design of high-performance fiber-reinforced concrete coupling beams and coupled-wall systems.” Doctoral dissertation, Dept. of Civil and Environmental Engineering, Univ. of Michigan.
Lequesne, R. D., G. J. Parra-Montesinos, and J. K. Wight. 2013. “Seismic behavior and detailing of high-performance fiber-reinforced concrete coupling beams and coupled wall systems.” J. Struct. Eng. 139 (8): 1362–1370. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000687.
Leutbecher, T., and E. Fehling. 2008. “Crack width control for combined reinforcement of rebars and fibers exemplified by ultra-high-performance concrete.” fib Task Group 8 (1): 1–28.
Liang, X. W., Q. S. Liu, and P. Li. 2007. “Experiment research on seismic performance of new reinforcement scheme deep coupling beam.” [In Chinese.] Build. Struct. 37 (12): 26–30.
Lim, E., S. J. Hwang, T. W. Wang, and Y. H. Chang. 2016. “An investigation on the seismic behavior of deep reinforced concrete coupling beams.” ACI Struct. J. 113 (2): 217–226. https://doi.org/10.14359/51687939.
Marti, P., T. Pfyl, V. Sigrist, and T. Ulaga. 1999. “Harmonized test procedures for steel fiber-reinforced concrete.” ACI Mater. J. 96 (6): 676–685.
Mihaylov, B. 2015a. “Five-spring model for complete shear behaviour of deep beams.” Struct. Concr. 16 (1): 71–83. https://doi.org/10.1002/suco.201400044.
Mihaylov, B. 2015b. “Predicting the non-linear shear behaviour of deep beams based on a two-parameter kinematic model.” In Proc., Concrete-Innovation and Design: fib Symp. Proc. Kongens Lyngby, Denmark: Technical Univ. of Denmark.
Mihaylov, B. 2019. “A kinematics-based approach for the shear strength of short fibre-reinforced concrete coupling beams.” Eng. Struct. 182 (Mar): 501–509. https://doi.org/10.1016/j.engstruct.2018.11.066.
Mihaylov, B. I., E. C. Bentz, and M. P. Collins. 2013. “Two-parameter kinematic theory for shear behavior of deep beams.” ACI Struct. J. 110 (3): 447–456.
Mihaylov, B. I., and R. Franssen. 2018. “Macro-kinematic approach for shear behaviour of short coupling beams with conventional reinforcement.” In High tech concrete: Where technology and engineering meet, 1147–1155. Cham, Switzerland: Springer.
Mihaylov, B. I., P. Hannewald, and K. Beyer. 2016. “Three-parameter kinematic theory for shear-dominated reinforced concrete walls.” J. Struct. Eng. 142 (7): 04016041. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001489.
Mihaylov, B. I., B. Hunt, E. C. Bentz, and M. P. Collins. 2015. “Three-parameter kinematic theory for shear behavior of continuous deep beams.” ACI Struct. J. 112 (1): 47.
Naish, D., A. Fry, R. Klemencic, and J. Wallace. 2013. “Reinforced concrete coupling beams. Part I: Testing.” ACI Struct. J. 110 (6): 1057–1066.
Paulay, T., and J. R. Binney. 1974. “Diagonally reinforced coupling beams of shear walls.” Spec. Publ. 42 (1): 579–598.
Qi, J., Z. J. Ma, and J. Wang. 2017. “Shear strength of UHPFRC beams: Mesoscale fiber-matrix discrete model.” J. Struct. Eng. 143 (4): 04016209. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001701.
Qian, J. R., and F. J. Xu. 2006. “Displacement-based deformation capacity design method of reinforced concrete coupling beams.” [In Chinese.] Build. Struct. 36 (1): 63–65.
Stroeven, P. 2009. “Stereological principles of spatial modeling applied to steel fiber-reinforced concrete in tension.” ACI Mater. J. 106 (3): 213–222.
Su, R. K. L., W. Y. Lam, and H. J. Pam. 2009. “Experimental study of plate-reinforced composite deep coupling beams.” Struct. Des. Tall Special Build. 18 (3): 235–257. https://doi.org/10.1002/tal.407.
Tadepalli, P. R., Y. L. Mo, T. T. C. Hsu, and J. Vogel. 2009. “Mechanical properties of steel fiber reinforced concrete beams.” In Proc., Structures Congress 2009: Don’t Mess with Structural Engineers: Expanding Our Role, 1–10. Reston, VA: ASCE. https://doi.org/10.1061/41031(341)115.
Thomas, J., and A. Ramaswamy. 2007. “Mechanical properties of steel fiber-reinforced concrete.” J. Mater. Civ. Eng. 19 (5): 385–392. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:5(385).
Vecchio, F. J. 2000. “Disturbed stress field model for reinforced concrete: Formulation.” J. Struct. Eng. 126 (9): 1070–1077. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:9(1070).
Vecchio, F. J., and M. P. Collins. 1986. “The modified compression-field theory for reinforced concrete elements subjected to shear.” ACI J. 83 (2): 219–231.
Wu, K., F. Chen, C. Chen, H. Zheng, and J. Xu. 2019. “Load-transfer mechanism and bond-stress components in steel and steel fiber–reinforced concrete structure.” J. Struct. Eng. 145 (12): 04019160. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002441.
Zhang, H. Z. 2006. Experimental study on shear resistance properties of steel fiber reinforced high-strength concrete members. [In Chinese.] Dalian, China: Dalian Univ. of Technology.
Zhao, J., K. Li, F. Shen, X. Zhang, and C. Si. 2018. “An analytical approach to predict shear capacity of steel fiber reinforced concrete coupling beams with small span-depth ratio.” Eng. Struct. 171 (Sep): 348–361. https://doi.org/10.1016/j.engstruct.2018.05.072.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Jun 24, 2020
Accepted: Jun 22, 2021
Published online: Aug 27, 2021
Published in print: Nov 1, 2021
Discussion open until: Jan 27, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.