Compression-Bending Strength Model for Corrugated Steel Tube Confined Reinforced Concrete Section
Publication: Journal of Structural Engineering
Volume 147, Issue 11
Abstract
Corrugated steel tube (CST) confined reinforced concrete (RC) sections, which consists of galvanized corrugated steel tubes infilled with concrete and steel reinforcements, provide a solution for their practical application in the outdoor and offshore corrosive environment. To investigate their compression-bending, cross-sectional behavior, a fiber model is established by treating it as a confined reinforced concrete section. The model considers the nonuniformity of concrete confinement pressure across the cross-sectional depth and tensile axial-strain concentration at the lock seam. The ultimate strength and lateral deflection of the CST confined RC sections are investigated. Further in-depth analyses are carried out to study the influence of the eccentricity ratio, geometric parameters (thickness, helical angle and corrugation profile of tubes, and reinforcing bars ratio), as well as materials strength (concrete and tube). Finally, a design method is proposed to predict the compression-bending strength of CST-confined RC sections, and its precision is verified by comparison with tests and numerical results.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Data are available on request from the authors. Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This research work was supported by the National Natural Science Foundation of China (Grant No. 51878221), which is gratefully acknowledged. The support from the Foreign Short-Term Visiting Program for Doctoral Students of the Harbin Institute of Technology in cooperation with the Department of Civil and Environmental Engineering at the National University of Singapore is also acknowledged.
References
ACI (American Concrete Institute). 2011. Building code requirement for reinforced concrete. ACI 318-11. Farmington Hills, MI: ACI.
AIJ (Architectural Institute of Japan). 1997. Recommendations for design and construction of concrete filled steel tubular structures. Tokyo: AIJ.
AISC. 2016. Specification for structural steel buildings. ANSI/AISC 360-16. Chicago: AISC.
AISI (American Iron and Steel Institute). 1999. Modern sewer design. 4th ed. Washington, DC: AISI.
Assas, M. M. 2014. “Efficiency of corrugated steel jackets for strengthening or repairing square section concrete columns.” Supplement, Life Sci. J. 11 (S8): 618–628. https://doi.org/10.7537/marslsj1108s14.124.
Bambach, M. R., H. Jama, X. L. Zhao, and R. H. Grzebietab. 2008. “Hollow and concrete filled steel hollow sections under transverse impact loads.” Eng. Struct. 30 (10): 2859–2870. https://doi.org/10.1016/j.engstruct.2008.04.003.
Cai, J., I. Burgess, and R. Plank. 2003. “A generalised steel/reinforced concrete beam-column element model for fire conditions.” Eng. Struct. 25 (6): 817–833. https://doi.org/10.1016/S0141-0296(03)00019-1.
CEN (European Committee for Standardization). 2004a. Design of composite steel and concrete structures. Part 1-1: General rules and rules for buildings. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2004b. Design of concrete structures, part 1-1: General rules and rules for buildings. Brussels, Belgium: CEN.
Chai, Y. K. 2019. Experimental study on mechanical properties of short corrugated steel tube filled with rubberized concrete under axial load. [In Chinese.] Beijing: Beijing Jiaotong Univ.
Chinese Standard. 2010. Code for design of concrete structures. [In Chinese.] GB 50010-2010. Beijing: China Architecture and Building Press.
CSPI (Corrugated Steel Pipe Institute). 2010. Handbook of steel drainage and highway construction products. 2nd ed. Kitchener, ON, Canada: CSPI.
CSPI (Corrugated Steel Pipe Institution). 2018. The 2018 photo contest results. Kitchener, ON, Canada: CSPI.
Fang, Y., C. Y. Liu, H. Yang, and L. G. Yang. 2020a. “Axial behaviour of concrete-filled corrugated steel tubular column embedded with structural steel.” J. Constr. Steel Res. 170 (Jul): 106064. https://doi.org/10.1016/j.jcsr.2020.106064.
Fang, Y., Y. Y. Wang, C. Hou, and B. Lu. 2020b. “CFDST stub columns with galvanized corrugated steel tubes: Concept and axial behaviour.” Thin-Walled Struct. 157 (Dec): 107116. https://doi.org/10.1016/j.tws.2020.107116.
Farahi, M., A. Heidarpour, X. L. Zhao, and R. Al-Mahaidi. 2016. “Compressive behaviour of concrete-filled double-skin sections consisting of corrugated plates.” Eng. Struct. 111 (Mar): 467–477. https://doi.org/10.1016/j.engstruct.2015.12.012.
Farahi, M., A. Heidarpour, X. L. Zhao, and R. Al-Mahaidi. 2017. “Effect of ultra-high strength steel on mitigation of non-ductile yielding of concrete-filled double-skin columns.” Constr. Build. Mater. 147 (30): 736–749. https://doi.org/10.1016/j.conbuildmat.2017.04.189.
Ghobarah, A., A. Biddah, and M. Mahgoub. 1997. “Rehabilitation of reinforced concrete columns using corrugated steel jacketing.” J. Earthquake Eng. 1 (4): 651–673. https://doi.org/10.1080/13632469708962382.
Gu, X. L., X. Y. Jin, and Y. Zhou. 2015. Basic principles of concrete structures. Shanghai, China: Tongji University Press.
Han, L.-H. 2004. “Flexural behaviour of concrete-filled steel tubes.” J. Constr. Steel Res. 60 (2): 313–337. https://doi.org/10.1016/j.jcsr.2003.08.009.
Han, L.-H. 2007. Concrete filled steel tubular structure, theory and practice. [In Chinese.] 3rd ed. Beijing: Science Press.
Han, L.-H., W. Li, and R. Bjorhovde. 2014. “Developments and advanced applications of concrete-filled steel tubular (CFST) structures: Members.” J. Constr. Steel Res. 100 (Sep): 211–228. https://doi.org/10.1016/j.jcsr.2014.04.016.
Han, L.-H., X.-L. Zhao, Y.-F. Yang, and J.-B. Feng. 2003. “Experimental study and calculation of fire resistance of concrete-filled hollow steel columns.” J. Struct. Eng. 129 (3): 346–356. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:3(346).
Han, T. H., J. M. Stallings, and Y. J. Kang. 2010. “Nonlinear concrete model for double-skinned composite tubular columns.” Constr. Build. Mater. 24 (12): 2542–2553. https://doi.org/10.1016/j.conbuildmat.2010.06.001.
Han, T. H., D. Won, S. Kim, and Y. J. Kang. 2015. “Experimental study on the lateral behavior of DSCT columns with corrugated inner tube.” Mater. Struct. 48 (9): 2855–2867. https://doi.org/10.1617/s11527-014-0361-0.
Hibbeler, R. C. 2017. Mechanics of materials. 10th ed. Boston: Pearson.
Ho, J. C. M., X. L. Ou, M. T. Chen, Q. Wang, and M. H. Lai. 2020. “A path dependent constitutive model for CFFT column.” Eng. Struct. 210 (May): 110367. https://doi.org/10.1016/j.engstruct.2020.110367.
Hou, B. R., X. G. Li, X. M. Ma, C. W. Du, D. W. Zhang, M. Zheng, W. C. Xu, D. Z. Lu, and F. B. Ma. 2017. “The cost of corrosion in China.” NPJ Mater. Degrad. 1 (1): 1–10. https://doi.org/10.1038/s41529-017-0005-2.
Khateeb, B. M., N. A. Siddiqui, T. H. Almusallam, H. Abbas, and Y. A. Al-Salloum. 2020. “Behavior of novel CFST circular column-to-foundation connections under cyclic loading.” Eng. Struct. 221 (Oct): 111051. https://doi.org/10.1016/j.engstruct.2020.111051.
Lai, B. L., and J. Y. Richard Liew. 2020. “Axial-moment interaction of high strength concrete encased steel composite columns: Design recommendation.” J. Constr. Steel Res. 170 (Jul): 106136. https://doi.org/10.1016/j.jcsr.2020.106136.
Lai, B. L., J. Y. Richard Liew, and A. L. Hoang. 2019. “Behavior of high strength concrete encased steel composite stub columns with C130 concrete and S690 steel.” Eng. Struct. 200 (Dec): 109743. https://doi.org/10.1016/j.engstruct.2019.109743.
Lam, D., and E. El-Lobody. 2005. “Behavior of headed stud shear connectors in composite beam.” J. Struct. Eng. 131 (1): 96–107. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:1(96).
Liu, C. Y., Y. Y. Wang, W. Wang, and X. R. Wu. 2014a. “Seismic performance and collapse prevention of concrete-filled thin-walled steel tubular arches.” Thin-Walled Struct. 80 (Jul): 91–102. https://doi.org/10.1016/j.tws.2014.03.005.
Liu, C. Y., Y. Y. Wang, X. R. Wu, and S. M. Zhang. 2017. “In-plane stability of fixed concrete-filled steel tubular parabolic arches under combined bending and compression.” J. Bridge Eng. 22 (2): 04016116. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000993.
Liu, F. Q., L. Gardner, and H. Yang. 2014b. “Post-fire behaviour of reinforced concrete stub columns confined by circular steel tubes.” J. Constr. Steel Res. 102 (Nov): 82–103. https://doi.org/10.1016/j.jcsr.2014.06.015.
Liu, F. Q., H. Yang, and L. Gardner. 2016. “Post-fire behaviour of eccentrically loaded reinforced concrete columns confined by circular steel tubes.” J. Constr. Steel Res. 122 (Jul): 495–510. https://doi.org/10.1016/j.jcsr.2016.04.008.
Liu, Z. F., W. Q. Hao, J. M. Xie, J. S. Lu, R. Huang, and Z. H. Wang. 2015. “Axial-impact buckling modes and energy absorption properties of thin-walled corrugated tubes with sinusoidal patterns.” Thin-Walled Struct. 94 (Sep): 410–423. https://doi.org/10.1016/j.tws.2015.05.002.
Mahbod, M., and M. Asgari. 2018. “Energy absorption analysis of a novel foam-filled corrugated composite tube under axial and oblique loadings.” Thin-Walled Struct. 129 (Aug): 58–73. https://doi.org/10.1016/j.tws.2018.03.023.
Mander, J. B., M. J. N. Priestley, and R. Park. 1988. “Theoretical stress-strain model for confined concrete.” J. Struct. Eng. 114 (8): 1804–1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804).
Nassirnia, M., A. Heidarpour, X. L. Zhao, and J. Minkkinen. 2015. “Innovative hollow corrugated columns: A fundamental study.” Eng. Struct. 94 (Jul): 43–53. https://doi.org/10.1016/j.engstruct.2015.03.028.
NCSPA (National Corrugated Steel Pipe Association). 2008. Corrugated steel pipe design manual. 2nd ed. Washington, DC: NCSPA.
Newmark, N. M. 1943. “Numerical procedure for computing deflections, moments, and buckling loads.” Trans. Am. Soc. Civ. Eng. 108 (1): 1161–1188. https://doi.org/10.1061/TACEAT.0005640.
Nie, J. G., Y. H. Wang, and J. S. Fan. 2012. “Experimental study on seismic behavior of concrete filled steel tube columns under pure torsion and compression–torsion cyclic load.” J. Constr. Steel Res. 79 (Dec): 115–126. https://doi.org/10.1016/j.jcsr.2012.07.029.
Ouyang, Y., A. K. H. Kwan, S. H. Lo, and J. C. M. Ho. 2017. “Finite element analysis of concrete-filled steel tube (CFST) columns with circular sections under eccentric load.” Eng. Struct. 148 (Oct): 387–398. https://doi.org/10.1016/j.engstruct.2017.06.064.
Pour, A., A. Gholampour, J. N. Zheng, T. Ozbakkaloglu. 2019. “Behavior of FRP-confined high-strength concrete under eccentric compression: Tests on concrete-filled FRP tube columns.” Compos. Struct. 220: 261–272. https://doi.org/10.1016/j.compstruct.2019.03.031.
Remennikov, A. M., S. Y. Kong, and B. Uy. 2011. “Response of foam- and concrete-filled square steel tubes under low-velocity impact loading.” J. Perform. Constr. Facil. 25 (5): 373–381. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000175.
Saatcioglu, M., A. H. Salamat, and S. R. Razvi. 1995. “Confined columns under eccentric loading.” J. Struct. Eng. 121 (11): 1547–1556. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:11(1547).
Tao, Z., L. H. Han, and X. L. Zhao. 2004. “Behaviour of concrete-filled double skin (CHS inner and CHS outer) steel tubular stub columns and beam-columns.” J. Constr. Steel Res. 60 (8): 1129–1158. https://doi.org/10.1016/j.jcsr.2003.11.008.
Tao, Z., U. Katwal, B. Uy, and W. D. Wang. 2021. “Simplified nonlinear simulation of rectangular concrete-filled steel tubular columns.” J. Struct. Eng. 147 (6): 04021061. https://doi.org/10.1061/(ASCE)ST.1943-541X.0003021.
Tomii, M. 1993. “Non-hooped reinforced concrete columns and beam-to-column connections laterally confined in bellows square steel tube.” In Proc., Tom Paulay Symp. on Recent Developments in Lateral Force Transfer in Buildings, 375–396. San Diego: ACI Publication.
Varma, A. H., J. M. Ricles, R. Sause, and L. W. Lu. 2002. “Experimental behavior of high strength square concrete-filled steel tube beam-columns.” J. Struct. Eng. 128 (3): 309–318. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:3(309).
Wang, X. D., J. P. Liu, and S. M. Zhang. 2015. “Behavior of short circular tubed-reinforced-concrete columns subjected to eccentric compression.” Eng. Struct. 105 (Dec): 77–86. https://doi.org/10.1016/j.engstruct.2015.10.001.
Wang, Y. Y., L. G. Yang, H. Yang, and C. Y. Liu. 2019. “Behaviour of concrete-filled corrugated steel tubes under axial compression.” Eng. Struct. 183 (Mar): 475–495. https://doi.org/10.1016/j.engstruct.2018.12.093.
Wang, Z. B., Z. Tao, L. H. Han, B. Uy, D. Lam, and W. H. Kang. 2017. “Strength, stiffness and ductility of concrete-filled steel columns under axial compression.” Eng. Struct. 135 (Mar): 209–221. https://doi.org/10.1016/j.engstruct.2016.12.049.
Yang, L., Y. Wang, M. Elchalakani, and Y. Fang. 2020a. “Experimental behavior of concrete-filled corrugated steel tubular short columns under eccentric compression and non-uniform confinement.” Eng. Struct. 220 (Oct): 111009. https://doi.org/10.1016/j.engstruct.2020.111009.
Yang, X., H. Yang, and S. Zhang. 2020b. “Transverse impact behavior of high-strength concrete filled normal-/high-strength square steel tube columns.” Inter. J. Impact Eng. 139 (May): 103512. https://doi.org/10.1016/j.ijimpeng.2020.103512.
Zhao, M. Z., Y. Y. Wang, D. E. Lehman, Y. Geng, and C. W. Roeder. 2021. “Response and modeling of axially-loaded concrete-filled steel columns with recycled coarse and fine aggregate.” Eng. Struct. 234: 111733. https://doi.org/10.1016/j.engstruct.2020.111733.
Zhou, X., J. Liu, X. Wang, and Y. F. Chen. 2016. “Behavior and design of slender circular tubed-reinforced-concrete columns subjected to eccentric compression.” Eng. Struct. 124 (Oct): 17–28. https://doi.org/10.1016/j.engstruct.2016.05.036.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Oct 20, 2020
Accepted: Jun 7, 2021
Published online: Aug 31, 2021
Published in print: Nov 1, 2021
Discussion open until: Jan 31, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Yong Fang, Yuyin Wang, Ligui Yang, Hua Yang, Uniaxial Monotonic and Cyclic Compressive Stress–Strain Model for Concrete-Filled Thin-Walled Helical Corrugated Steel Tubes, Journal of Structural Engineering, 10.1061/JSENDH.STENG-11719, 149, 6, (2023).
- Yong Fang, Yuyin Wang, T.Y. Yang, Hua Yang, Seismic behaviour and modelling of reinforced concrete-filled galvanized corrugated steel tubes, Journal of Constructional Steel Research, 10.1016/j.jcsr.2023.107785, 202, (107785), (2023).
- Yong Fang, Hua Yang, Bo Lu, Yuyin Wang, Jucan Dong, Experimental investigation on shear-bending performances of concrete-filled thin-walled corrugated steel tubes, Engineering Structures, 10.1016/j.engstruct.2022.115147, 274, (115147), (2023).
- Kun Yang, Tao Yu, Guiliang Ma, Jiaxiang Zhao, Shanshan Sun, Study on the Constitutive Model of Concrete Confined by Multi-Spiral Composite Stirrups, Buildings, 10.3390/buildings12122179, 12, 12, (2179), (2022).
- Yong Fang, Yuyin Wang, Hua Yang, Xiaoqi Lin, Experimental behavior of concrete-filled thin-walled corrugated steel tubes with large helical angles under monotonic and cyclic axial compression, Thin-Walled Structures, 10.1016/j.tws.2022.109043, 173, (109043), (2022).
- Ze-Xuan Sun, Yun Zou, Cheng-Quan Wang, Jie Pan, Li Wang, Ming Chen, Axial compressive behavior and load-bearing capacity of steel tubular-corrugated steel plate confined concrete composite columns, Structures, 10.1016/j.istruc.2022.08.008, 44, (135-151), (2022).