Novel Energy Dissipation Bracing Designed for Corrugated Sheet–Sheathed Cold-Formed Steel Shear Wall
Publication: Journal of Structural Engineering
Volume 147, Issue 11
Abstract
This study developed a special energy dissipation X-bracing for cold-formed steel (CFS) shear walls to improve the ductility of the corrugated steel sheathing. In previous research, CFS shear walls with corrugated sheathing demonstrated poor ductility under cyclic loading. The paper presents a potential solution by adding a special energy dissipation bracing (EDB) to improve the ductility of the corrugated sheet–sheathed shear walls. The EDB can be tuned according to the CFS shear wall base performance to achieve the highest postpeak deflection capacity, thereby significantly improving the seismic ductility. To prove the concept and analyze the feasibility of the new EDB, a test program of nine full-scale shear walls was conducted. The experimental results showed that with the tuned EDB, the corrugated steel sheet–sheathed shear walls had improved ductility with no considerable reduction in the initial stiffness and shear strength. Installing the proposed EDB can be an efficient approach to enhance the seismic performance of CFS-framed shear walls. Details of the test program and discussion are presented.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All test data that support the findings of this study are available from the corresponding author upon reasonable request.
References
AISI (American Iron and Steel Institute). 2012. North American standards for cold-formed steel framing—Product data, 2012 Edition. Washington, DC: AISI.
ASTM. 2012a. Standard practice for static load test for shear resistance of framed walls for buildings. West Conshohocken, PA: ASTM.
ASTM. 2012b. Standard test methods for cyclic (reversed) load test for shear resistance of vertical elements of the lateral force resisting systems for buildings. West Conshohocken, PA: ASTM.
ASTM. 2015. Standard specification for high strength structural bolts, steel and alloy steel, heat treated, 120 ksi (830 MPa) and 150 ksi (1040 MPa) minimum tensile strength, inch and metric dimensions. West Conshohocken, PA: ASTM.
ASTM. 2017. Standard test methods and definitions for mechanical testing of steel products. West Conshohocken, PA: ASTM.
Franklin, N., E. Heffernan, and T. McCarthy. 2020. The case for cold-formed steel construction for the mid-rise residential sector in Australia: A survey of international CFS professionals. Berlin: Springer.
Fülöp, L. A., and B. Dubina. 2004. “Performance of wall-stud cold-formed shear panels under monotonic and cyclic loading. Part I: Experimental research.” Thin-Walled Struct. 42 (2): 321–338. https://doi.org/10.1016/S0263-8231(03)00063-6.
IBC (International Building Code). 2015. International building code, 2015 edition. Washington, DC: International Code Council.
Liu, P., K. D. Peterman, and B. W. Schafer. 2014. “Impact of construction details on OSB-sheathed cold-formed steel framed shear walls.” J. Constr. Steel Res. 101 (5): 114–123. https://doi.org/10.1016/j.jcsr.2014.05.003.
Miller, T. H., and T. Pekoz. 1994. “Behavior of gypsum-sheathed cold-formed steel wall studs.” J. Struct. Eng. 120 (5): 1644–1650. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:5(1644).
Peterman, K. D., and Schafer, B. W. 2014. “Sheathed cold-formed steel studs under axial and lateral load.” J. Struct. Eng. 140 (10): 04014074. https://doi.org/10.1061/(ASCE ST.1943-541X.0000966.
Selvaraj, S., and M. Madhavan. 2018. “Studies on cold-formed steel stud panels with gypsum sheathing subjected to out-of-plane bending.” J. Struct. Eng. 144 (9): 04018136. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002069.
Selvaraj, S., and M. Madhavan. 2019. “Sheathing braced design of cold-formed steel structural members subjected to torsional buckling.” Structures 20 (Aug): 489–509. https://doi.org/10.1016/j.istruc.2019.04.015.
Selvaraj, S., and M. Madhavan. 2020. “Structural behavior and design of plywood sheathed cold-formed steel wall systems subjected to out of plane loading.” J. Constr. Steel Res. 166 (Mar): 105888. https://doi.org/10.1016/j.jcsr.2019.105888.
Serrette, R. L. 1997. Additional shear wall values for light weight steel framing. Santa Clara, CA: Santa Clara Univ.
Serrette, R. L. 2002. Performance of cold-formed steel-framed shear walls: Alternative configurations. Santa Clara, CA: Santa Clara Univ.
Serrette, R. L., H. Nguyen, and G. Hall. 1996. Shear wall values for light weight steel framing. Santa Clara, CA: Santa Clara Univ.
Shamim, I., D. Morello, and C. Rogers. 2010. “Dynamic testing and analyses of wood sheathed/CFS framed shear walls.” In Proc., 9th US National and 10th Canadian Conf. on Earthquake Engineering. Oakland, CA: Earthquake Engineering Research Institute.
Stojadinovic, B., and S. Tipping. 2007. Structural testing of corrugated sheet steel shear walls. Ontario, CA: Charles Pankow Foundation.
Vieira, L. C. M., Jr., and B. W. Schafer. 2013. “Behavior and design of sheathed cold-formed steel stud walls under compression.” J. Struct. Eng. 139 (5): 772–786. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000731.
Ye, J., X. Wang, and M. Zhao. 2016. “Experimental study on shear behavior of screw connections in CFS sheathing.” J. Constr. Steel Res. 121 (2): 1–12. https://doi.org/10.1016/j.jcsr.2015.12.027.
Yu, C. 2010. “Shear resistance of cold-formed steel framed shear walls with 0.686 mm, 0.762 mm, and 0.838 mm steel sheet sheathing.” Eng. Struct. 32 (6): 1522–1529. https://doi.org/10.1016/j.engstruct.2010.01.029.
Yu, C., and Y. Chen. 2011. “Detailing recommendations for 1.83 m wide cold-formed steel shear walls with steel sheathing.” J. Constr. Steel Res. 67 (1): 93–101. https://doi.org/10.1016/j.jcsr.2010.07.009.
Yu, C., Z. Huang, and H. Vora. 2009. “Cold-formed steel framed shear wall assemblies with corrugated sheet steel sheathing.” In Proc., Annual Stability Conf. Phoenix, AZ: Structural Stability Research Council.
Yu, C., and G. Yu. 2016. “Experimental investigation of cold-formed steel framed shear wall using corrugated steel sheathing with circular holes.” J. Struct. Eng. 142 (12): 04016126. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001609.
Yu, C., W. Zhang, G. Yu, and J. Wang. 2018. “Cold-formed steel framed shear wall using corrugated steel sheathing with slits.” J. Struct. Eng. 144 (8): 04018111. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002097.
Yu, G. 2013. “Cold-formed steel framed shear wall sheathed with corrugated steel sheet.” M.S. thesis, Dept. of Engineering Technology, Univ. of North Texas.
Zhang, W., M. Mahdavian, and C. Yu. 2018. “Different slit configuration in corrugated sheathing of cold-formed steel shear wall.” J. Constr. Steel Res. 150 (Nov): 430–441. https://doi.org/10.1016/j.jcsr.2018.08.035.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Jul 9, 2020
Accepted: Jun 7, 2021
Published online: Aug 25, 2021
Published in print: Nov 1, 2021
Discussion open until: Jan 25, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Dalila M. Lopes, António P. C. Duarte, Nuno Silvestre, Experimental Investigation of Light Steel Framing Walls under Horizontal Loading, Buildings, 10.3390/buildings13010193, 13, 1, (193), (2023).
- Xuhong Zhou, Xinmei Yao, Lei Xu, Yu Shi, Ke Ke, Liping Liu, Shake table tests on a full-scale six-storey cold-formed thin-walled steel-steel plate shear wall structure, Thin-Walled Structures, 10.1016/j.tws.2022.110009, 181, (110009), (2022).
- Baris Mert Pehlivan, Eray Baran, Cem Topkaya, Yagmur Topcuoglugil Isik, Investigation of CFS shear walls with two-sided sheathing and dense fastener layout, Thin-Walled Structures, 10.1016/j.tws.2022.109832, 180, (109832), (2022).
- Xiyu Liu, Wenying Zhang, Cheng Yu, Yi Li, Ziqin Jiang, Shaole Yu, Experimental study on cold-formed steel shear walls with different corrugated steel sheathings, Journal of Constructional Steel Research, 10.1016/j.jcsr.2022.107639, 199, (107639), (2022).