Mesoscale Modeling of a Masonry Building Subjected to Earthquake Loading
Publication: Journal of Structural Engineering
Volume 147, Issue 1
Abstract
Masonry structures constitute an important part of the built environment and architectural heritage in seismic areas. A large number of these old structures showed inadequate performance and suffered substantial damage under past earthquakes. Realistic numerical models are required for accurate response predictions and for addressing the implementation of effective strengthening solutions. A comprehensive mesoscale modeling strategy explicitly allowing for masonry bond is presented in this paper. It is based on advanced nonlinear material models for interface elements simulating cracks in mortar joints and brick/block units under cyclic loading. Moreover, domain decomposition and mesh tying techniques are used to enhance computational efficiency in detailed nonlinear simulations. The potential of this approach is shown with reference to a case study of a full-scale unreinforced masonry building previously tested in laboratory under pseudodynamic loading. The results obtained confirm that the proposed modeling strategy for brick/block-masonry structures leads to accurate representations of the seismic response of three-dimensional (3D) building structures, both at the local and global levels. The numerical-experimental comparisons show that this detailed modeling approach enables remarkably accurate predictions of the actual dynamic characteristics, along with the main resisting mechanisms and crack patterns.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code used during the study were provided by a third party. Experimental data: Direct requests for these materials may be made to the provider as indicated in the Acknowledgements.
Some or all data, models, or code generated or used during the study are proprietary or confidential in nature and may only be provided with restrictions. ADAPTIC code: Limited access may be provided upon request to the last author. Numerical models can be provided by contacting the first author.
Acknowledgments
The first author has been supported by the European Commission through the Marie Skłodowska-Curie individual fellowship Multi-level Model Calibration for the Assessment of Historical Masonry Structures (MultiCAMS), Project No. 744400. Dr. Armelle Anthoine at the European Laboratory for Structural Assessment, and Professor Andrea Penna at the University of Pavia and the consortium of ESECMaSE project are gratefully acknowledged for providing the experimental data used in this research. Finally, the authors acknowledge the Research Computing Service at Imperial College for providing and supporting the required high-performance computing facilities.
References
Addessi, D., and E. Sacco. 2016. “Enriched plane state formulation for nonlinear homogenization of in-plane masonry wall.” Meccanica 51 (11): 2891–2907. https://doi.org/10.1007/s11012-016-0484-1.
Anthoine, A. 1995. “Derivation of the in-plane elastic characteristics of masonry through homogenization theory.” Int. J. Solids Struct. 32 (2): 137–163. https://doi.org/10.1016/0020-7683(94)00140-R.
Anthoine, A., and P. Capéran. 2008. Earthquake tests and analysis of the experimental results. Ispra, Italy: European Laboratory for Structural Assessment.
Anthoine, A., and D. Tirelli. 2008. Preliminary tests and dynamic identification of the specimens. Ispra, Italy: European Laboratory for Structural Assessment.
Berto, L., A. Saetta, R. Scotta, and R. Vitaliani. 2002. “An orthotropic damage model for masonry structures.” Int. J. Numer. Methods Eng. 55 (2): 127–157. https://doi.org/10.1002/nme.495.
Betti, M., L. Galano, and A. Vignoli. 2014. “Comparative analysis on the seismic behaviour of unreinforced masonry buildings with flexible diaphragms.” Eng. Struct. 61 (1): 195–208. https://doi.org/10.1016/j.engstruct.2013.12.038.
Betti, M., L. Galano, and A. Vignoli. 2015. “Time-history seismic analysis of masonry buildings: A comparison between two non-linear modelling approaches.” Buildings 5 (2): 597–621. https://doi.org/10.3390/buildings5020597.
CEN (European Committee for Standardization). 2005. Eurocode 8: Design of structures for earthquake resistance—Part 1: General rules, seismic actions and rules for buildings. Brussels, Belgium: CEN.
Chaimoon, K., and M. M. Attard. 2005. Shear fracture in masonry joints. Malta: WIT Press.
Chisari, C., L. Macorini, C. Amadio, and B. A. Izzuddin. 2015. “An inverse analysis procedure for material parameter identification of mortar joints in unreinforced masonry.” Comput. Struct. 155 (Jul): 97–105. https://doi.org/10.1016/j.compstruc.2015.02.008.
Chisari, C., L. Macorini, C. Amadio, and B. A. Izzuddin. 2018. “Identification of mesoscale model parameters for brick-masonry.” Int. J. Solids Struct. 146 (Aug): 224–240. https://doi.org/10.1016/j.ijsolstr.2018.04.003.
CUR (Centre for Civil Engineering Research and Codes). 1994. Structural masonry: A experimental/numerical basis for practical design rules. Gouda, Netherlands: CUR.
D’Altri, A. M., F. Messali, J. Rots, G. Castellazzi, and S. de Miranda. 2019. “A damaging block-based model for the analysis of the cyclic behavior of full-scale masonry structures.” Eng. Fract. Mech. 209 (Mar): 423–448. https://doi.org/10.1016/j.engfracmech.2018.11.046.
D’Ayala, D., and A. Ansal. 2012. “Non linear push over assessment of heritage buildings in Istanbul to define seismic risk.” Bull. Earthquake Eng. 10 (1): 285–306. https://doi.org/10.1007/s10518-011-9311-1.
Endo, Y., L. Pelà, and P. Roca. 2017. “Review of different pushover analysis methods applied to masonry buildings and comparison with nonlinear dynamic analysis.” J. Earthquake Eng. 21 (8): 1234–1255. https://doi.org/10.1080/13632469.2016.1210055.
Gambarotta, L., and S. Lagomarsino. 1997. “Damage models for the seismic response of brick masonry shear walls. Part I: The mortar joint model and its applications.” Earthquake Eng. Struct. Dyn. 26 (4): 423–439. https://doi.org/10.1002/(SICI)1096-9845(199704)26:4%3C441::AID-EQE651%3E3.0.CO;2-0.
Geuzaine, C., and J. F. Remacle. 2009. “Gmsh: A three-dimensional finite element mesh generator with built-in pre- and post-processing facilities.” Int. J. Numer. Methods Eng. 79 (11): 1309–1331. https://doi.org/10.1002/nme.2579.
Hendrickson, B., and R. Leland. 1995. “A multi-level algorithm for partitioning graphs.” In Proc., IEEE/ACM SC95 Conf. San Diego: IEEE.
Izzuddin, B. A. 1991. “Nonlinear dynamic analysis of framed structures.” Ph.D. thesis, Civil Engineering Dept., Imperial College London.
Jokhio, G. 2012. “Mixed dimensional hierarchic partitioned analysis of nonlinear structural systems.” Ph.D. thesis. Dept. of Civil and Environmental Engineering, Imperial College London.
Jokhio, G. A., and B. A. Izzuddin. 2013. “Parallelisation of nonlinear structural analysis using dual partition super elements.” Adv. Eng. Software 60 (Jun): 81–88. https://doi.org/10.1016/j.advengsoft.2012.10.004.
Jokhio, G. A., and B. A. Izzuddin. 2015. “A dual super-element domain decomposition approach for parallel nonlinear finite element analysis.” Int. J. Comput. Methods Eng. Sci. Mech. 16 (3): 188–212. https://doi.org/10.1080/15502287.2015.1043163.
Kallioras, S., F. Graziotti, and A. Penna. 2019. “Numerical assessment of the dynamic response of a URM terraced house exposed to induced seismicity.” Bull. Earthquake Eng. 17 (3): 1521–1552. https://doi.org/10.1007/s10518-018-0495-5.
Karypis, G. 2015. “Family of graph and hypergraph partitioning software.” Accessed January 21, 2018. http://glaros.dtc.umn.edu/gkhome/views/metis.
Karypis, G., and V. Kumar. 1998. “Multilevel k-way partitioning scheme for irregular graphs.” J. Parallel Distrib. Comput. 48 (1): 96–129. https://doi.org/10.1006/jpdc.1997.1404.
Kim, S. C., and D. W. White. 2004. “Nonlinear analysis of a one-story low-rise masonry building with a flexible diaphragm subjected to seismic excitation.” Eng. Struct. 26 (14): 2053–2067. https://doi.org/10.1016/j.engstruct.2004.06.008.
Lagomarsino, S., A. Penna, A. Galasco, and S. Cattari. 2013. “TREMURI program: An equivalent frame model for the nonlinear seismic analysis of masonry buildings.” Eng. Struct. 56 (Nov): 1787–1799. https://doi.org/10.1016/j.engstruct.2013.08.002.
Lourenço, P. 1996. “Computational strategies for masonry structures.” Ph.D. thesis. Civil Engineering Dept., Technische Universiteit Delft.
Lourenço, P. B. 2009. “Recent advances in masonry modelling: Micromodelling and homogenisation.” In Multiscale modeling in solid mechanics, edited by U. Galvanetto and M. H. F. Aliabadi, 251–294. London: Imperial College Press.
Lourenço, P. B., and J. G. Rots. 1997. “Multisurface interface model for analysis of masonry structures.” J. Eng. Mech. 123 (7): 660–668. https://doi.org/10.1061/(ASCE)0733-9399(1997)123:7(660).
Luciano, R., and E. Sacco. 1997. “Homogenization technique and damage model for old masonry material.” Int. J. Solids Struct. 34 (24): 3191–3208. https://doi.org/10.1016/S0020-7683(96)00167-9.
Macorini, L., and B. A. Izzuddin. 2011. “A non-linear interface element for 3D mesoscale analysis of brick-masonry structures.” Int. J. Numer. Methods Eng. 85 (12): 1584–1608. https://doi.org/10.1002/nme.3046.
Macorini, L., and B. A. Izzuddin. 2013a. “Enhanced mesoscale partitioned modelling for unreinforced masonry structures.” In Proc., 14th Int. Conf. on Civil, Structural And Environmental Engineering Computing, 3–6. Cagliari, Italy: Civil-Comp Press.
Macorini, L., and B. A. Izzuddin. 2013b. “Nonlinear analysis of masonry structures using mesoscale partitioned modeling.” Adv. Eng. Software 60 (Jun): 58–69. https://doi.org/10.1016/j.advengsoft.2012.11.008.
Macorini, L., and B. A. Izzuddin. 2014. “Nonlinear analysis of unreinforced masonry walls under blast loading using mesoscale partitioned modeling.” J. Struct. Eng. 140 (8): A4014002. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000931.
Magenes, G., P. Morandi, and A. Penna. 2008. Test results on the behavior of masonry under static cyclic in plane lateral loads. Pavia, Italy: Univ. of Pavia.
Mandirola, M., A. Galasco, A. Penna, and G. Magenes. 2016. Nonlinear macroelement modelling of experimental tests on masonry buildings with rigid diaphragms. Boca Raton, FL: CRC Press.
Massart, T., R. Peerlings, and M. Geers. 2007. “An enhanced multi-scale approach for masonry wall computations with localization of damage.” Int. J. Numer. Methods Eng. 69 (5): 1022–1059. https://doi.org/10.1002/nme.1799.
Mendes, N., and P. B. Lourenço. 2014. “Sensitivity analysis of the seismic performance of existing masonry buildings.” Eng. Struct. 80 (Dec): 137–146. https://doi.org/10.1016/j.engstruct.2014.09.005.
Michel, C., B. Zapico, P. Lestuzzi, F. J. Molina, and F. Weber. 2011. “Quantification of fundamental frequency drop for unreinforced masonry buildings from dynamic tests.” Earthquake Eng. Struct. Dyn. 40 (11): 1283–1296. https://doi.org/10.1002/eqe.1088.
Milani, G., and M. Valente. 2015. “Comparative pushover and limit analyses on seven masonry churches damaged by the 2012 Emilia-Romagna (Italy) seismic events: Possibilities of non-linear finite elements compared with pre-assigned failure mechanisms.” Eng. Fail. Anal. 47 (Part A): 129–161. https://doi.org/10.1016/j.engfailanal.2014.09.016.
Minga, E., L. Macorini, and B. Izzuddin. 2018a. “A 3D mesoscale damage-plasticity approach for masonry structures under cyclic loading.” Meccanica 53 (7): 1591–1611. https://doi.org/10.1007/s11012-017-0793-z.
Minga, E., L. Macorini, and B. Izzuddin. 2018b. “Enhanced mesoscale partitioned modelling of heterogeneous masonry structures.” Int. J. Numer. Methods Eng. 113 (13): 1950–1971. https://doi.org/10.1002/nme.5728.
Ojalvo, I. U., and M. Newman. 1970. “Vibration modes of large structures by an automatic matrix-reduction method.” AIAA J. 8 (7): 1234–1239.
Pantò, B., F. Cannizzaro, S. Caddemi, and I. Caliò. 2016. “3D macro-element modelling approach for seismic assessment of historical masonry churches.” Adv. Eng. Software 97 (Jul): 40–59. https://doi.org/10.1016/j.advengsoft.2016.02.009.
Pluijm, R. V., H. Rutten, and M. Ceelen. 2000. “Shear behavior of bed joints.” In Proc., 12th Int. Brick and Block Masonry Conf. Madrid, Spain: Leibniz Universität Hannover.
Ravula, M., and K. V. Subramaniam. 2019. “Experimental investigation and interface material model for the cohesive—Frictional shear response of soft-brick masonry under applied compression.” J. Mater. Civ. Eng. 31 (12): 04019311. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002961.
Sarhosis, V., and Y. Sheng. 2014. “Identification of material parameters for low bond strength masonry.” Eng. Struct. 60 (Feb): 100–110. https://doi.org/10.1016/j.engstruct.2013.12.013.
Tubaldi, E., L. Macorini, and B. A. Izzuddin. 2018. “Three-dimensional mesoscale modelling of multi-span masonry arch bridges subjected to scour.” Eng. Struct. 165 (Jun): 486–500. https://doi.org/10.1016/j.engstruct.2018.03.031.
Valente, M., and G. Milani. 2019. “Damage assessment and collapse investigation of three historical masonry palaces under seismic actions.” Eng. Fail. Anal. 98 (Apr): 10–37. https://doi.org/10.1016/j.engfailanal.2019.01.066.
Zhang, Y., L. Macorini, and B. A. Izzuddin. 2016. “Mesoscale partitioned analysis of brick-masonry arches.” Eng. Struct. 124 (Oct): 142–166. https://doi.org/10.1016/j.engstruct.2016.05.046.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Dec 3, 2019
Accepted: Jun 11, 2020
Published online: Oct 21, 2020
Published in print: Jan 1, 2021
Discussion open until: Mar 21, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.