Damping Ratio of RC Squat Wall with Limited Damage under High-Frequency Earthquake
Publication: Journal of Structural Engineering
Volume 147, Issue 1
Abstract
In regions experiencing high-frequency earthquakes, it is necessary to reevaluate the seismic performance of nuclear power plant buildings. In the evaluation of equipment, as well as the structure, the damping ratio of a structure is important. In the present study, to evaluate the damping ratio of walls with limited damage, a shaking table test was conducted for reinforced concrete squat walls with a low aspect ratio. The test variables were the natural frequency of the walls and the type of earthquake (i.e., earthquakes with and without high-frequency contents). The result showed that for a peak ground acceleration of , the damping ratio of the walls was 3.5% for the mean and 0.27 for the standard deviation, while for high-frequency earthquakes, the damping ratio was 14.3% lower (3.0% for the mean). In particular, as the dynamic response amplification increased, the damping ratio decreased; when the dynamic amplification was greater than 1.5, the average damping ratio of the walls was 2.4%.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This work was supported by the Korea Institute of Energy Technology Evaluation and Planning (KETEP) and the Ministry of Trade, Industry & Energy (MOTIE) of the Republic of Korea (No. 20201510100010).
References
Astrom, K. J. 1979. “Maximum likelihood and prediction error methods.” IFAC Proc. Volumes 12 (8): 551–574. https://doi.org/10.1016/S1474-6670(17)53976-2.
Chopra, A. K. 1995. Dynamics of structures: Theory and applications to earthquake engineering. Englewood Cliffs, NJ: Prentice Hall.
EPRI (Electric Power Research Institute). 2018. Seismic fragility and seismic margin guidance for seismic probabilistic risk assessments. Palo Alto, CA: EPRI.
Hashimoto, P. S., L. W. Tiong, L. K. Steele, J. J. Johnson, and J. L. Beck. 1993. Stiffness and damping properties of a low aspect ratio shear wall building based on recorded earthquake responses.. Washington, DC: US Nuclear Regulatory Commission.
Ibrahim, S. R. 1977. “Random decrement technique for modal identification of structures.” J. Spacecraft Rockets 14 (11): 696–700. https://doi.org/10.2514/3.57251.
Jeary, A. P. 1986. “Damping in tall buildings—A mechanism and a predictor.” Earthquake Eng. Struct. Dyn. 14 (5): 733–750. https://doi.org/10.1002/eqe.4290140505.
Kennedy, R., and J. Reed. 1994. Methodology for developing seismic fragilities EPRI TR-103959. Palo Alto, CA: Electric Power Research Institute.
Martinelli, P., and F. C. Filippou. 2009. “Simulation of the shaking table test of a seven-story shear wall building.” Earthquake Eng. Struct. Dyn. 38 (5): 587–607. https://doi.org/10.1002/eqe.897.
Reed, J. W., R. P. Kennedy, D. R. Butterner, I. M. Idriss, D. P. Moore, T. Barr, and J. E. Smith. 1991. A methodology for assessment of nuclear power plant seismic margin.. Palo Alto, CA: Electric Power Research Institute.
Satake, N., K. I. Suda, T. Arakawa, A. Sasaki, and Y. Tamura. 2003. “Damping evaluation using full-scale data of buildings in Japan.” J. Struct. Eng. 129 (4): 470–477. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:4(470).
Suda, K., N. Satake, J. Ono, and A. Sasaki. 1996. “Damping properties of buildings in Japan.” J. Wind Eng. Ind. Aerodyn. 59 (2–3): 383–392. https://doi.org/10.1016/0167-6105(96)00018-9.
Thompson, D. 2015. Railway noise and vibration: Mechanisms, modeling and means of control. 2nd ed. Cambridge, MA: Academic Press.
USNRC (US Nuclear Regulatory Commission). 1973. Design response spectra for seismic design of nuclear power plants. Regulatory Guide 1.60. Revision 1, 6. North Bethesda, MD: USNRC.
USNRC (US Nuclear Regulatory Commission). 2006. A performance-based approach to define the site-specific earthquake ground motion. Regulatory guide 1.208. Revision 1, 1–21. North Bethesda, MD: USNRC.
USNRC (US Nuclear Regulatory Commission). 2007. Damping values for seismic analysis for nuclear power plants, regulatory guide 1.61. Revision 1, 4. North Bethesda, MD: USNRC.
Wilson, E. L. 2000. Static and dynamic analysis of structures, a physical approach with emphasis on earthquake engineering. Berkeley, CA: Computers and Structures.
Wu, B. 2015. “A correction of the half-power bandwidth method for estimating damping.” Arch. Appl. Mech. 85 (2): 315–320. https://doi.org/10.1007/s00419-014-0908-0.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Oct 15, 2019
Accepted: Aug 3, 2020
Published online: Oct 21, 2020
Published in print: Jan 1, 2021
Discussion open until: Mar 21, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.