Abstract

This paper presents the experimental and numerical investigations of two types of bonded posttensioned concrete bridge beams under hydrocarbon fire, including the box and tee beams. The factors considered included the load level and fire exposure duration. Six specimens were tested. The surface temperatures, strand temperatures, and midspan deflection of specimens were measured. Results showed that the box beam under service load could sustain fire for 184 min, while the tee beam could only endure for 105 min before collapse. The overloaded box beam could withstand fire for around 165 min. For exposure to fire for 90 min followed by cooling down to ambient temperature, the box and tee beams lost 11% and 38% of load-carrying capacity, respectively. Postfire observation also showed severe spalling at the midspan and support regions of the specimens. The test results were also used to validate the finite element models established for predicting the thermal and structural responses of the bridge beams under hydrocarbon fire.

Get full access to this article

View all available purchase options and get full access to this article.

References

AASHTO. 2002. Standard specifications for highway bridges. Washington, DC: AASHTO.
Alos-Moya, J., I. Paya-Zaforteza, A. Hospitaler, and P. Rinaudo. 2017. “Valencia bridge fire tests: Experimental study of a composite bridge under fire.” J. Constr. Steel Res. 138 (Nov): 538–554. https://doi.org/10.1016/j.jcsr.2017.08.008.
Ashton, L. A., and S. C. C. Bate. 1960. “The fire-resistance of prestressed concrete beams.” Proc. Inst. Civ. Eng. 17 (1): 15–38.
ASTM. 2016. Standard test methods for fire tests of building construction and materials. ASTM E 119-16. West Conshohocken, PA: ASTM.
Ba, G., J. Miao, W. Zhang, and C. Liu. 2016. “Influence of cracking on heat propagation in reinforced concrete structures.” J. Struct. Eng. 142 (7): 04016035. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001483.
Beneberu, E., and N. Yazdani. 2018. “Performance of CFRP-strengthened concrete bridge girders under combined live load and hydrocarbon fire.” J. Bridge Eng. 23 (7): 04018042. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001244.
CEN (European Committee for Standardization). 1999. Fire resistance tests. 2: Alternative and additional procedures. BS EN 1363-2. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2002. Actions on structures. 1-2. Eurocode 1. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2004. Design of concrete structures. 1-2. Eurocode 2. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2005. Design of composite steel and concrete structures. 1-2. Eurocode 4. Brussels, Belgium: CEN.
Choi, J., R. Haj-Ali, and H. S. Kim. 2012. “Integrated fire dynamic and thermomechanical modeling of a bridge under fire.” Struct. Eng. Mech. 42 (6): 815–829. https://doi.org/10.12989/sem.2012.42.6.815.
Dwaikat, M. B., and V. K. R. Kodur. 2009. “Response of restrained concrete beams under design fire exposure.” J. Struct. Eng. 135 (11): 1408–1417. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000058.
fib (International Federation for Structural Concrete). 2012. FIB model code for concrete structures 2010. Lausanne, Switzerland: fib.
Gales, J., K. Hartin, and L. A. Bisby. 2015. Structural fire performance of contemporary post-tensioned concrete construction. New York: Springer.
Garlock, M. E. M., I. Paya-Zaforteza, V. K. R. Kodur, and L. Gu. 2012. “Fire hazard in bridges: Review, assessment and repair strategies.” Eng. Struct. 35 (Feb): 89–98. https://doi.org/10.1016/j.engstruct.2011.11.002.
Giuliani, L., C. Crosti, and F. Gentili. 2012. “Vulnerability of bridges to fire.” In Proc., 6th Int. Conf. on Bridge Maintenance, Safety, and Management, 8–12. Abingdon, UK: CRC Press.
Gong, X., and A. K. Agrawal. 2015. “Numerical simulation of fire damage to a long-span truss bridge.” J. Bridge Eng. 20 (10): 04014109. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000707.
Gustaferro, A. H. 1973. “Fire resistance of post-tensioned structures.” J. Prestressed Concr. Inst. 18 (2): 38–63.
Hou, X. M., V. K. R. Kodur, and W. Z. Zheng. 2015. “Factors governing the fire response of bonded prestressed concrete continuous beams.” Mater. Struct. 48 (9): 2885–2900. https://doi.org/10.1617/s11527-014-0365-9.
ISO. 1999. Fire-resistance tests—Elements of building construction. 1. ISO 834. Geneva: ISO.
Khalaf, J., and Z. H. Huang. 2016. “Analysis of the bond behaviour between prestressed strands and concrete in fire.” Constr. Build. Mater. 128 (Dec): 12–23. https://doi.org/10.1016/j.conbuildmat.2016.10.016.
Kodur, V. K. R. 2000. “Spalling in high strength concrete exposed to fire: Concerns, causes, critical parameters and cures.” In Proc., Structures Congress, 1–9. Reston, VA: ASCE.
Kodur, V. K. R., P. Pakala, and M. B. Dwaikat. 2010. “Energy based time equivalent approach for evaluating fire resistance of reinforced concrete beams.” Fire Saf. J. 45 (4): 211–220. https://doi.org/10.1016/j.firesaf.2010.03.002.
MOHURD (Ministry of Housing and Urban-Rural Development of the People’s Republic of China). 2010. Code for design of concrete structures. [In Chinese.] GB50010-2010. Beijing: MOHURD.
Peris-Sayol, G., I. Paya-Zaforteza, J. Alos-Moya, and A. Hospitaler. 2015. “Analysis of the influence of geometric, modeling and environmental parameters on the fire response of steel bridges subjected to realistic fire scenarios.” Comput. Struct. 158 (Oct): 333–345. https://doi.org/10.1016/j.compstruc.2015.06.003.
Phan, L. T., T. P. McAllister, J. L. Gross, and M. J. Hurley. 2010. Best practice guidelines for structural fire resistance design of concrete and steel buildings. Gaithersburg, MD: NIST.
SIMULA. 2014. Analysis user’s manual. Providence, RI: Dassault Systèmes.
Wardhana, K., and F. C. Hadipriono. 2003. “Analysis of recent bridge failures in the United States.” J. Perform. Constr. Facil. 17 (3): 144–150. https://doi.org/10.1061/(ASCE)0887-3828(2003)17:3(144).
Wu, X. Q., F. T. K. Au, and J. Li. 2018. “Experimental investigation of post-tensioned concrete bridge beams exposed to hydrocarbon fire.” In Proc., 10th Int. Conf. on Structure in Fire, 505–512. Newtownabbey, UK: Ulster Univ.
Zhang, L., F. T. K. Au, Y. Wei, and J. Li. 2017. “Mechanical properties of prestressing steel in and after fire.” Mag. Concr. Res. 69 (8): 379–388. https://doi.org/10.1680/jmacr.15.00267.

Information & Authors

Information

Published In

Go to Journal of Structural Engineering
Journal of Structural Engineering
Volume 146Issue 10October 2020

History

Received: Apr 14, 2019
Accepted: May 5, 2020
Published online: Jul 25, 2020
Published in print: Oct 1, 2020
Discussion open until: Dec 25, 2020

Permissions

Request permissions for this article.

Authors

Affiliations

Xi-qiang Wu [email protected]
Formerly, Ph.D. Candidate, Dept. of Civil Engineering, Univ. of Hong Kong, Hong Kong 999077, China. Email: [email protected]
Research Assistant, Dept. of Civil Engineering, Univ. of Hong Kong, Hong Kong 999077, China. ORCID: https://orcid.org/0000-0002-9922-0876. Email: [email protected]
Professor, Dept. of Civil Engineering, Univ. of Hong Kong, Hong Kong 999077, China (corresponding author). ORCID: https://orcid.org/0000-0002-2163-3531. Email: [email protected]
Associate Professor, School of Civil Engineering and Transportation, South China Univ. of Technology, Guangzhou 510640, China. ORCID: https://orcid.org/0000-0001-7410-7378. Email: [email protected]

Metrics & Citations

Metrics

Citations

Download citation

If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.

Cited by

View Options

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Media

Figures

Other

Tables

Share

Share

Copy the content Link

Share with email

Email a colleague

Share