Engineering Review of ASCE 7-16 Wind-Load Provisions and Wind Effect on Tall Concrete-Frame Buildings
Publication: Journal of Structural Engineering
Volume 146, Issue 6
Abstract
Wind load is one of the main concerns for engineers in the design of tall buildings. In contrast to seismic demand, the wind load spectrum has more energy at lower frequencies, which is why taller buildings that have less frequency are more sensitive to wind load. Equivalent static wind load (ESWL) is the primary method to calculate the mean wind load and fluctuation effect due to wind turbulence-structure interaction, called the gust effect. The most accepted way to calculate the effect is the gust load factor (GLF) approach, which is widely adopted by current codes and standards. With further improvements, the base moment gust load factor (MGLF) method enhances the GLF method and eliminates its disadvantages. This paper discusses all aspects of defining wind load and studies the effect of certain parameters on the calculation. This paper focuses on calculating the along-wind force and how the gust effect changes by following the procedure in the relevant ASCE standard and comparing the approaches and results side by side.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was supported by the Korea Agency for Infrastructure Technology Advancement (KAIA) grant funded by the Ministry of Land, Infrastructure and Transport (Grant No. 20CTAP-C151831-02) and by the Engineering Research Institute at Seoul National University. The views expressed are those of the authors and do not necessarily represent those of the sponsor.
References
ASCE. 2010. Minimum design loads for buildings and other structures. ASCE 7. Reston, VA: ASCE.
ASCE. 2016. Minimum design loads and associated criteria for buildings and other structures. ASCE 7. Reston, VA: ASCE.
Davenport, A. G. 1967. “Gust loading factors.” J. Struct. Div. 93 (3): 11–34.
Goel, R. K., and A. K. Chopra. 1997. “Period formulas for moment-resisting frame buildings.” J. Struct. Eng. 123 (11): 1454–1461. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:11(1454).
ISO. 1997. Wind actions on structures. ISO 4354. Geneva: ISO.
Satake, N., K. I. Suda, T. Arakawa, A. Sasaki, and Y. Tamura. 2003. “Damping evaluation using full-scale data of buildings in Japan.” J. Struct. Eng. 129 (4): 470–477. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:4(470).
Solari, G. 1987. “Turbulence modeling for gust loading.” J. Struct. Eng. 113 (7): 1550–1569.
Solari, G. 1993. “Gust buffeting, II: Dynamic along-wind response.” J. Struct. Eng. 119 (2): 383–398.
Zhou, Y., and A. Kareem. 2001a. “Equivalent static lateral forces on buildings under seismic and wind effects.” J. Wind Eng. 89: 605–608.
Zhou, Y., and A. Kareem. 2001b. “Gust loading factor: New model.” J. Struct. Eng. 127 (2): 168–175. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:2(168).
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Feb 4, 2019
Accepted: Oct 22, 2019
Published online: Mar 30, 2020
Published in print: Jun 1, 2020
Discussion open until: Aug 30, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.