Predicting Shear Strength of Reinforced Concrete Knee Joints in Closing and Opening Actions
Publication: Journal of Structural Engineering
Volume 146, Issue 6
Abstract
The shear capacity of reinforced concrete knee joints in closing and opening actions are determined in this paper using the framework of the softened strut-and-tie model. The proposed model considers the closing and opening actions separately and takes into account the differences in joint behavior to accurately predict the joint capacity in closing and opening actions. The proposed model satisfies force equilibrium, strain compatibility, and the constitutive relationship of the cracked concrete. The predicted shear capacity values in both actions are compared with the experimental results of 59 knee joint specimens reported by various researchers. The gathered dataset consists of specimens with a wide range of geometric and reinforcement variations. The comparison showed an excellent correlation between the predicted shear capacity values and the available experimental results in both closing and opening actions of knee joints.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The support of the Research Grants Council of Hong Kong under Grant No. 16209115 is gratefully acknowledged.
References
ACI (American Concrete Institute). 2010. Recommendations for design of beam-column connections in monolithic reinforced concrete structures. ACI 352R-02. Farmington Hills, MI: ACI.
ACI (American Concrete Institute). 2014. Building code requirements for structural concrete. ACI 318. Farmington Hills, MI: ACI.
Angelakos, B. 2000. “The behavior of reinforced concrete knee joints under earthquake loads.” Ph.D. dissertation, Dept. of Civil Engineering, Univ. of Toronto.
CEN (European Committee for Standardization). 2004. Design of structures for earthquake resistance. Part I : General rules, seismic actions and rules for buildings. Eurocode 8. Brussels, Belgium: CEN.
Cote, P. A., and J. W. Wallace. 1994. A study of reinforced concrete knee-joints subjected to cyclic lateral loading. New York: Clarkson Univ.
Hwang, S.-J., and H.-J. Lee. 1999. “Analytical model for predicting shear strengths of exterior reinforced concrete beam-column joints for seismic resistance.” ACI Struct. J. 96 (5): 846–858. https://doi.org/10.14359/739.
Hwang, S.-J., and H.-J. Lee. 2000. “Analytical model for predicting shear strengths of interior reinforced concrete beam-column joints for seismic resistance.” ACI Struct. J. 97 (1): 35–44. https://doi.org/10.14359/831.
Jennewein, M., and K. Schäfer. 1992. “Standardisierte nachweise von häufigen D-Bereichen.” Deutscher Ausschuss fuer Stahlbeton 430. https://doi.org/10.2366/3709328.
Mazzoni, S., J. P. Moehle, and C. R. Thewalt. 1991. Cyclic response of RC beam-column knee joints: Test and retrofit. Berkeley, CA: Univ. of California.
McConnell, S. W., and J. W. Wallace. 1995. Behavior of reinforced concrete beam-column knee-joints subjected to reversed cyclic loading. New York: Clarkson Univ.
Megget, L. M. 1998. “Seismic behaviour of small reinforced concrete beam-column knee joints.” Bull. New Zealand Nat. Soc. Earthquake Eng. 31 (4): 215–245. https://doi.org/10.5459/bnzsee.31.4.215-245.
Mogili, S. 2019. “Seismic behaviour and strength of reinforced concrete knee joints.” Ph.D. dissertation, Dept. of Civil and Environmental Engineering, Hong Kong Univ. of Science and Technology.
Mogili, S., and J. S. Kuang. 2018. “Cyclic vulnerability of RC knee connections under relatively high opening shear stresses.” In Proc., 16th European Conf. on Earthquake Engineering. Athens, Greece: GEK TERNA Group.
Mogili, S., and J. S. Kuang. 2019. “Reversed cyclic performance of reinforced concrete knee joints under variable closing and opening stresses.” Eng. Struct. 178 (Jan): 116–127. https://doi.org/10.1016/j.engstruct.2018.10.025.
Mogili, S., J. S. Kuang, and R. Y. C. Huang. 2019. “Effects of beam–column geometry and eccentricity on seismic behaviour of RC beam–column knee joints.” Bull. Earthquake Eng. 17 (5): 2671–2686. https://doi.org/10.1007/s10518-019-00562-y.
Zhang, L. X., and T. T. C. Hsu. 1998. “Behavior and analysis of 100 MPa concrete membrane elements.” J. Struct. Eng. 124 (1): 24–34. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:1(24).
Zhang, N. 2017. “Seismic performance and shear strength of reinforced concrete beam-column knee joints.” Ph.D. dissertation, Dept. of Civil and Environmental Engineering, Hong Kong Univ. of Science and Technology.
Zhang, N., J. S. Kuang, and S. Mogili. 2017. “Cyclic behaviour of reinforced concrete beam-column knee joints.” In Proc., 16th World Conf. on Earthquake Engineering. Red Hook, NY: Curran Associates.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Jun 19, 2019
Accepted: Nov 4, 2019
Published online: Mar 30, 2020
Published in print: Jun 1, 2020
Discussion open until: Aug 30, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.