Shear Strength of Composite Circular Reinforced Concrete–Filled Steel Tubes
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Structural Engineering
Volume 146, Issue 1
Abstract
The shear strength of composite circular concrete-filled steel tube (CFST) and reinforced concrete–filled steel tube (RCFST) structural members was investigated using finite-element analysis and existing test data. Results showed how a compression strut develops in concrete infill under shear load in the presence of low shear spans and provided the basis for proposing a mechanics-based shear strength equation for those composite members. The proposed equation quantifies the contribution of that strut to total strength as a function of shear span and accounts for the interactions between the steel tube and the concrete infill. The effectiveness of the proposed equation was compared with shear test data from the existing literature and was found to be safe; it accurately captures the contribution of the steel tube to the total strength and conservatively estimates that of the concrete.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was sponsored by AASHTO, in cooperation with the Federal Highway Administration (FHWA), and was conducted in the National Cooperative Highway Research Program (NCHRP), which is administered by the Transportation Research Board (TRB) of the National Academies of Sciences, Engineering, and Medicine, under the Research Project NCHRP 12-93. The authors thank the NCHRP 12-93 Program Officer and the other members of the project’s advisory panel. However, any opinions, findings, conclusions, and recommendations presented in this report are those of the authors and do not necessarily reflect acceptance by or the views of the National Academy, the TRB, the FHWA, or AASHTO.
References
AASHTO. 2014. AASHTO LRFD bridge design specifications, customary US Units, with 2015 interim revisions. 7th ed. Washington, DC: AASHTO.
ACI (American Concrete Institute). 2011. Building code requirements for structural concrete and commentary. ACI 318. Farmington Hills, MI: ACI.
ACI (American Concrete Institute). 2014. Building code requirements for structural concrete: An ACI standard: Commentary on building code requirements for structural concrete (ACI 318R-14): An ACI report. ACI 318. Farmington Hills, MI: ACI.
AISC. 2016. Specification for structural steel buildings. Chicago: AISC.
Brown, N. K. 2013. “Strain limits for concrete filled steel tubes in AASHTO seismic provisions.” M.S. thesis, Dept. of Civil, Construction, and Environmental Engineering, North Carolina State Univ.
Bruneau, M., H. Kenarangi, and T. P. Murphy. 2018. Contribution of steel casing to single shaft foundation structural resistance. Washington, DC: Transportation Research Board.
Bruneau, M., and J. Marson. 2004. “Seismic design of concrete-filled circular steel bridge piers.” J. Bridge Eng. 9 (1): 24–34. https://doi.org/10.1061/(ASCE)1084-0702(2004)9:1(24).
Hajjar, J. F. 2000. “Concrete-filled steel tube columns under earthquake loads.” Prog. Struct. Mater. Eng. 2 (1): 72–81. https://doi.org/10.1002/(SICI)1528-2716(200001/03)2:1%3C72::AID-PSE9%3E3.0.CO;2-E.
Hajjar, J. F., B. C. Gourley, C. Tort, M. D. Denavit, and P. H. Schiller. 2013. “Steel-concrete composite structural systems.” Boston: Dept. of Civil and Environmental Engineering, Northeastern Univ. Accessed January 23, 2018. http://www.northeastern.edu/compositesystems.
Han, L. H., and Y. F. Yang. 2005. “Cyclic performance of concrete-filled steel CHS columns under flexural loading.” J. Constr. Steel Res. 61 (4): 423–452. https://doi.org/10.1016/j.jcsr.2004.10.004.
Lai, Z., A. H. Varma, and K. Zhang. 2014. “Noncompact and slender rectangular CFT members: Experimental database, analysis, and design.” J. Constr. Steel Res. 101 (Oct): 455–468. https://doi.org/10.1016/j.jcsr.2014.06.004.
Leon, R. T., D. K. Kim, and J. F. Hajjar. 2007. “Limit state response of composite columns and beam-columns Part I: Formulation of design provisions for the 2005 AISC specification.” Eng. J. 44 (1): 341–358.
LSTC (Livermore Software Technology Corp.). 2013. LS-DYNA keyword user’s manual version R7.0. Livermore, CA: LSTC.
Marson, J., and M. Bruneau. 2004. “Cyclic testing of concrete-filled circular steel bridge piers having encased fixed-based detail.” J. Bridge Eng. 9 (1): 14–23. https://doi.org/10.1061/(ASCE)1084-0702(2004)9:1(14).
Moon, J., D. E. Lehman, C. W. Roeder, and H. E. Lee. 2013. “Strength of circular concrete-filled tubes with and without internal reinforcement under combined loading.” J. Struct. Eng. 139 (12): 04013012. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000788.
Nakahara, H., and R. Tsumura. 2014. “Experimental study on shearing behavior of circular CFT short column.” J. Struct. Constr. Eng. 79 (703): 1385–1393. https://doi.org/10.3130/aijs.79.1385.
Qian, J., Y. Cui, and X. Fang. 2007. “Shear strength tests of concrete filled steel tube columns.” Tumu Gongcheng Xuebao (China Civ. Eng. J.) 40 (5): 1–9.
Roeder, C., D. Lehman, and E. Bishop. 2010. “Strength and stiffness of circular concrete-filled tubes.” J. Struct. Eng. 136 (12): 1545–1553. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000263.
Roeder, C., D. Lehman, and A. Maki. 2016. Shear design expressions for concrete filled steel tube and reinforced concrete filled tube components. Washington, DC: Washington State DOT.
WSDOT (Washington DOT). 2018. Bridge design manual LRFD. Olympia, WA: WSDOT.
Xiao, C., S. Cai, T. Chen, and C. Xu. 2012. “Experimental study on shear capacity of circular concrete filled steel tubes.” Steel Compos. Struct. 13 (5): 437–449. https://doi.org/10.12989/scs.2012.13.5.437.
Xu, C., L. Haixiao, and H. Chengkui. 2009. “Experimental study on shear resistance of self-stressing concrete filled circular steel tubes.” J. Constr. Steel Res. 65 (4): 801–807. https://doi.org/10.1016/j.jcsr.2008.12.004.
Ye, Y., L.-H. Han, Z. Tao, and S.-L. Guo. 2016. “Experimental behaviour of concrete-filled steel tubular members under lateral shear loads.” J. Constr. Steel Res. 122 (Jul): 226–237. https://doi.org/10.1016/j.jcsr.2016.03.012.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Feb 6, 2018
Accepted: Apr 25, 2019
Published online: Oct 31, 2019
Published in print: Jan 1, 2020
Discussion open until: Mar 31, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.