Damage Mitigation of Near-Full–Scale Deployable Tensegrity Structure through Behavior Biomimetics
Publication: Journal of Structural Engineering
Volume 146, Issue 1
Abstract
Opportunities to explore new structural behavior are made possible by incorporating sensors and actuators in civil-engineering infrastructure. Using analogies, structural behavior can be improved through the mimicry of a living organism. This is called biomimetics, and its study inspires functional goals for structures. While most biomimetic research focuses on geometric forms, this paper describes a study of how behavior goals of active structures can be inspired by nature. Tensegrity structures, systems of struts and cables in which mechanisms are stabilized by self-stress, are convenient test structures for active control and adaptation. In this situation, adaptation involves changing the damaged structure to satisfy design requirements as closely as possible. Although adaptation improves structural behavior, the prior state of the structure cannot always be fully restored to satisfy design requirements. Newly enhanced algorithms for control resulting cases for reuse exhibit the behavior-biomimetic characteristics of learning through reducing future execution time. Advanced active-control algorithms improve damage-mitigation performance.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research is sponsored by funding from the Swiss National Science Foundation under Project No. 200020_169026.
References
Adam, B., and I. F. Smith. 2008. “Reinforcement learning for structural control.” J. Comput. Civ. Eng. 22 (2): 133–139. https://doi.org/10.1061/(ASCE)0887-3801(2008)22:2(133).
Adam, B., and I. F. C. Smith. 2006. “Learning, self-diagnosis and multi-objective control of an active tensegrity structure.” In Vol. 140 of Advances in engineering structures, mechanics & construction, 439–448. Dordrecht, Netherlands: Springer.
Akgün, Y., C. J. Gantes, W. Sobek, K. Korkmaz, and K. Kalochairetis. 2011. “A novel adaptive spatial scissor-hinge structural mechanism for convertible roofs.” Eng. Struct. 33 (4): 1365–1376. https://doi.org/10.1016/j.engstruct.2011.01.014.
Amendola, A., G. Carpentieri, M. de Oliveira, R. Skelton, and F. Fraternali. 2014. “Experimental investigation of the softening stiffening response of tensegrity prisms under compressive loading.” Compos. Struct. 117 (11): 234–243. https://doi.org/10.1016/j.compstruct.2014.06.022.
Ashwear, N., and A. Eriksson. 2014. “Natural frequencies describe the pre-stress in tensegrity structures.” Comput. Struct. 138 (02): 162–171. https://doi.org/10.1016/j.compstruc.2014.01.020.
Ashwear, N., and A. Eriksson. 2017. “Vibration health monitoring for tensegrity structures.” Mech. Syst. Sig. Process. 85 (Feb): 625–637. https://doi.org/10.1016/j.ymssp.2016.08.039.
Averseng, J., and J. Dubé. 2012. “Design, analysis and self stress setting of a lightweight deployable tensegrity modular structure.” Procedia Eng. 40 (7): 14–19. https://doi.org/10.1016/j.proeng.2012.07.048.
Bel Hadj Ali, N., L. Rhode-Barbarigos, A. Pascual Albi, and I. F. C. Smith. 2010. “Design optimization and dynamic analysis of a tensegrity-based footbridge.” Eng. Struct. 32 (11): 3650–3659. https://doi.org/10.1016/j.engstruct.2010.08.009.
Bel Hadj Ali, N., A. C. Sychterz, and I. F. C. Smith. 2017. “A dynamic-relaxation formulation for analysis of cable structures with sliding-induced friction.” Int. J. Solids Struct. 127 (Nov): 240–251. https://doi.org/10.1016/j.ijsolstr.2017.08.008.
Bouderbala, M., and R. Motro. 2000. Folding tensegrity systems, 27–36. Dordrecht, Netherlands: Springer.
Cai, J., R. Yang, X. Wang, and J. Feng. 2019. “Effect of initial imperfections of struts on the mechanical behavior of tensegrity structures.” Compos. Struct. 207 (Jan): 871–876. https://doi.org/10.1016/j.compstruct.2018.09.018.
Calladine, C. R. 1978. “Buckminster Fuller’s ‘tensegrity’ structures and Clerk Maxwell’s rules for the construction of stiff frames.” Int. J. Solids Struct. 14 (2): 161–172. https://doi.org/10.1016/0020-7683(78)90052-5.
Calladine, C. R., and S. Pellegrino. 1991. “First-order infinitesimal mechanisms.” Int. J. Solids Struct. 27 (4): 505–515. https://doi.org/10.1016/0020-7683(91)90137-5.
Domer, B., and I. F. C. Smith. 2005. “An active structure that learns.” J. Comput. Civ. Eng. 19 (1): 16–24. https://doi.org/10.1061/(ASCE)0887-3801(2005)19:1(16).
Fest, E., K. Shea, and I. F. C. Smith. 2004. “Active tensegrity structure.” J. Struct. Eng. 130 (10): 1454–1465. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:10(1454).
Furuya, H. 1992. “Concept of deployable tensegrity structures in space applications.” Int. J. Space Struct. 7 (2): 143–151. https://doi.org/10.1177/026635119200700207.
Furuya, H. 2006. “Concept of inflatable tensegrity for large space structures.” In Proc., ASME Structure, Structural Dynamics, and Materials Conf. New York: ASME.
Gantes, C. J., J. J. Connor, R. D. Logcher, and Y. Rosenfeld. 1989. “Structural analysis and design of deployable structures.” Comput. Struct. 32 (3–4): 661–669. https://doi.org/10.1016/0045-7949(89)90354-4.
Hanaor, A. 1993. “Double-layer tensegrity grids as deployable structures.” Int. J. Space Struct. 8 (1–2): 135–143. https://doi.org/10.1177/0266351193008001-214.
Islam, F., J. Nasir, U. Malik, Y. Ayaz, and O. Hasan. 2012. “RRT*-Smart: Rapid convergence implementation of RRT* towards optimal solution.” In Proc., 2012 IEEE Int. Conf. on Mechatronics and Automation, ICMA 2012, 1651–1656. Piscataway, NJ: IEEE.
Kuffner, J., and S. LaValle. 2000. “RRT-connect: An efficient approach to single-query path planning.” In Vol. 2 of Proc., 2000 ICRA. Millennium Conf. IEEE Int. Conf. on Robotics and Automation. Symp. Proc. (Cat. No. 00CH37065), 995–1001. New York: IEEE.
Liu, Y., H. Du, L. Liu, and J. Leng. 2014. “Shape memory polymers and their composites in aerospace applications: A review.” Smart Mater. Struct. 23 (2): 023001. https://doi.org/10.1088/0964-1726/23/2/023001.
Motro, R. 2011. “Structural morphology of tensegrity systems.” Meccanica 46 (1): 27–40. https://doi.org/10.1007/s11012-010-9379-8.
Motro, R., B. Maurin, and C. Silvestri. 2006. “Tensegrity rings and the hollow rope.” In Proc., IASS Symp. Beijing: International Shell and Spatial Structures.
Pawlyn, M. 2011. Vol. 15 of Biomimicry in architecture. London: Riba Publishing.
Pellegrino, S. 1990. “Analysis of prestressed mechanisms.” Int. J. Solids Struct. 26 (12): 1329–1350. https://doi.org/10.1016/0020-7683(90)90082-7.
Pellegrino, S. 1995. “Large retractable appendages in spacecraft.” J. Spacecraft Rockets 32 (6): 1006–1014. https://doi.org/10.2514/3.26722.
Pellegrino, S., and C. Calladine. 1986. “Matrix analysis of statically and kinematically indeterminate frameworks.” Int. J. Solids Struct. 22 (4): 409–428. https://doi.org/10.1016/0020-7683(86)90014-4.
Pinaud, J.-P., S. Solari, and R. E. Skelton. 2004. “Deployment of a class 2 tensegrity boom.” In Vol. 5390 of Proc., Smart Structures and Materials 2004: Smart Structures and Integrated Systems, 155–162. San Diego: SPIE.
Raphael, B., and I. F. C. Smith. 2003. “A direct stochastic algorithm for global search.” J. Appl. Math. Comput. 146 (2–3): 729–758. https://doi.org/10.1.1.590.1047.
Rhode-Barbarigos, L., N. Ali, R. Motro, and I. F. C. Smith. 2012a. “Design aspects of a deployable tensegrity-hollow-rope footbridge.” Int. J. Space Struct. 27 (2–3): 81–95. https://doi.org/10.1260/0266-3511.27.2-3.81.
Rhode-Barbarigos, L., N. Hadj Ali, R. Motro, and I. F. C. Smith. 2010. “Designing tensegrity modules for pedestrian bridges.” Eng. Struct. 32 (4): 1158–1167. https://doi.org/10.1016/j.engstruct.2009.12.042.
Rhode-Barbarigos, L., C. Schulin, N. Bel Hadj Ali, R. Motro, and I. F. C. Smith. 2012b. “Mechanism-based approach for the deployment of a tensegrity-ring module.” J. Struct. Eng. 138 (4): 539–548. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000491.
Rieffel, J., and J.-B. Mouret. 2018. “Adaptive and resilient soft tensegrity robots.” Soft Rob. 5 (3): 318–329. https://doi.org/10.1089/soro.2017.0066.
Schenk, M., S. Guest, and J. Herder. 2007. “Zero stiffness tensegrity structures.” Int. J. Solids Struct. 44 (20): 6569–6583. https://doi.org/10.1016/j.ijsolstr.2007.02.041.
Senatore, G., P. Duffour, S. Hanna, and F. Labbe. 2011. “Adaptive structures for whole life energy savings.” J. Int. Assoc. Shell. Spatial Struct. 52 (170): 233–240.
Shekastehband, B., K. Abedi, and M. Chenaghlou. 2011. “Sensitivity analysis of tensegrity systems due to member loss.” J. Constr. Steel Res. 67 (9): 1325–1340. https://doi.org/10.1016/j.jcsr.2011.03.009.
Shekastehband, B., K. Abedi, N. Dianat, and M. Chenaghlou. 2012. “Experimental and numerical studies on the collapse behavior of tensegrity systems considering cable rupture and strut collapse with snap-through.” Int. J. Non-Linear Mech. 47 (7): 751–768. https://doi.org/10.1016/j.ijnonlinmec.2012.04.004.
Skelton, R. E., R. Adhikari, J.-P. Pinaud, and W. L. Chan. 2001. “An introduction to the mechanics of tensegrity structures.” In Proc., Conf. on Decision and Control, 4254–4259. Piscataway, NJ: IEEE.
Snelson, K. 2012. “The art of tensegrity.” Int. J. Space Struct. 27 (2–3): 71–80. https://doi.org/10.1260/0266-3511.27.2-3.71.
Sultan, C. 2014. “Tensegrity deployment using infinitesimal mechanisms.” Int. J. Solids Struct. 51 (21–22): 3653–3668. https://doi.org/10.1016/j.ijsolstr.2014.06.025.
Sultan, C., and R. Skelton. 2003. “Deployment of tensegrity structures.” Int. J. Solids Struct. 40 (18): 4637–4657. https://doi.org/10.1016/S0020-7683(03)00267-1.
Swiss Society of Engineering and Architects. 2013. Swiss building code SIA 260 A. Bern, Switzerland: Swiss Society of Engineering and Architects.
Sychterz, A. C., and I. F. C. Smith. 2017. “Joint friction during deployment of a near-full–scale tensegrity footbridge.” J. Struct. Eng. 143 (9): 04017081. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001817.
Sychterz, A. C., and I. F. C. Smith. 2018a. “Deployment and shape change of a tensegrity structure using path-planning and feedback control.” Front. Built Environ. 4 (10): 45–55. https://doi.org/10.3389/fbuil.2018.00045.
Sychterz, A. C., and I. F. C. Smith. 2018b. “Using dynamic measurements to detect and locate ruptured cables on a tensegrity structure.” Eng. Struct. 173 (10): 631–642. https://doi.org/10.1016/j.engstruct.2018.06.083.
Tibert, G. 2002. “Deployable tensegrity structures for space applications.” Ph.D. dissertation, Dept. of Mechanics, Royal Institute of Technology.
Veuve, N., S. D. Safaei, and I. F. C. Smith. 2015. “Deployment of a tensegrity footbridge.” J. Struct. Eng. 141 (11): 04015021. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001260.
Veuve, N., S. D. Safaei, and I. F. C. Smith. 2016. “Active control for mid-span connection of a deployable tensegrity footbridge.” Eng. Struct. 112 (Apr): 245–255. https://doi.org/10.1016/j.engstruct.2016.01.011.
Veuve, N., A. C. Sychterz, and I. F. C. Smith. 2017. “Adaptive control of a deployable tensegrity structure.” Eng. Struct. 152 (10): 14–23. https://doi.org/10.1016/j.engstruct.2017.08.062.
Xu, X., F. Sun, Y. Luo, and Y. Xu. 2014. “Collision-free path planning of tensegrity structures.” J. Struct. Eng. 140 (4): 04013084. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000900.
Zolesi, V., P. Ganga, L. Scolamiero, A. Micheletti, P. Podio-Guidugli, G. Tibert, A. Donati, and M. Ghiozzi. 2012. “On an innovative deployment concept for large space structures.” In Proc., 42nd Int. Conf. on Environmental Systems (ICES). Reston, VA: American Institute of Aeronautics and Astronautics.
Zuk, W. 1968. “Kinetic structures.” Civ. Eng. 38 (12): 62.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Sep 11, 2018
Accepted: May 10, 2019
Published online: Nov 4, 2019
Published in print: Jan 1, 2020
Discussion open until: Apr 4, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.