Abstract
The continuous hybrid fire-simulation method proposed in this paper is a robust method that allows numerical models with a certain level of complexity to be used in a real-time hybrid fire simulation. Extrapolation and interpolation are used for continuously generating displacement commands during the simulation. The elastic deformation of the loading frame is compensated for during the continuous command generation. The stability issues relating to the stiffness of the loading system and the proposed error-compensation scheme are discussed in depth. A large-scale hybrid fire simulation was carried out to validate the proposed method. A steel moment-resisting frame with reduced beam section connections was selected for the validation test. One column of the selected structure was physically represented in the lab, and the rest of the structure was modeled numerically. The physical specimen was heated with a standard fire curve, with the temperature in the numerical model increasing following the numerical heat-transfer analysis result. A multiresolution numerical model was used as the numerical substructure. The test results confirmed the proposed method can accurately simulate the behavior of a structure subjected to high temperature and subsequent failure.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research is financially supported by a National Research Council of Science & Technology (NST) grant by the Korean government (MSIP) (No. CRC-16-02-KICT).
References
ASTM. 2018. Standard test methods for fire tests of building construction and materials. ASTM E119-18ce1. West Conshohocken, PA: ASTM.
Barnett, C. R. 2007. “Replacing international temperature-time curves with BFD curve.” Fire Saf. J. 42 (4): 321–327. https://doi.org/10.1016/j.firesaf.2006.11.001.
CAN/ULC (Underwriters’ Laboratories of Canada). 2014. Standard methods of fire endurance tests of building construction and materials. CAN/ULC-S101. Toronto: ULC.
CEN (European Committee for Standardization). 2006. Design of steel structures—Part 1-12: Additional rules for the extension of EN 1993 up to steel grades S700. Eurocode 3. Brussels, Belgium: CEN.
Franssen, J.-M., D. Talamona, J. Kruppa, and L. G. Cajot. 1998. “Stability of steel columns in case of fire: Experimental evaluation.” J. Struct. Eng. 124 (2): 158–163. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:2(158).
Huang, X., and O. S. Kwon. 2018. “A generalized numerical/experimental distributed simulation framework.” J. Earthquake Eng. https://doi.org/10.1080/13632469.2018.1423585.
Hurley, M. J., D. Gottuk, J. R. Hall, K. Harada, E. Kuligowski, M. Puchovsky, J. Torero, J. M. Watts, and C. Wieczorek. 2016. SFPE handbook of fire protection engineering. 5th ed. New York: Springer.
ISO. 2014. Fire resistance tests—Elements of building construction. Part 11: Specific requirements for the assessment of fire protection to structural steel elements. ISO 834-11. Geneva: ISO.
Izzuddin, B. A., and D. B. Moore. 2002. “Lessons from a full-scale fire test.” Proc. ICE Struct. Build. 152 (4): 319–329. https://doi.org/10.1680/stbu.2002.152.4.319.
Jin, J., and S. El-Tawil. 2005. “Seismic performance of steel frames with reduced beam section connections.” J. Constr. Steel Res. 61 (4): 453–471. https://doi.org/10.1016/j.jcsr.2004.10.006.
Kodur, V. K. R., R. C. McGrath, J. C. Latour, and J. W. MacLaurin. 2000. Experimental studies on the fire endurance of high-strength concrete columns. Ottawa: National Research Council of Canada.
Korzen, M., G. Magonette, and P. Buchet. 1999. “Mechanical loading of columns in fire tests by means of the substructuring method.” In Proc., Annual Meeting, Gesellschaft fur Angewandte Mathematik und Mechanik: GAMM 98. Weinheim, Germany: Wiley.
McGrattan, K., S. Hostikka, R. McDermott, J. Floyd, C. Weinschenk, and K. Overholt. 2013. Fire dynamics simulator, user’s guide. 6th ed. Gaithersburg, MD: US Dept. of Commerce.
Mostafaei, H. 2013a. “Hybrid fire testing for assessing performance of structures in fire—Application.” Fire Saf. J. 56 (Feb): 30–38. https://doi.org/10.1016/j.firesaf.2012.12.003.
Mostafaei, H. 2013b. “Hybrid fire testing for assessing performance of structures in fire—Methodology.” Fire Saf. J. 58 (May): 170–179. https://doi.org/10.1016/j.firesaf.2013.02.005.
Nakashima, M., and N. Masaoka. 1999. “Real-time on-line test for MDOF systems.” Earthquake Eng. Struct. Dyn. 28 (4): 393–420. https://doi.org/10.1002/(SICI)1096-9845(199904)28:4%3C393::AID-EQE823%3E3.0.CO;2-C.
OpenFresco. 2015. The open-source framework for experimental setup and control. Berkeley, CA: Pacific Earthquake Engineering Research Center.
Peacock, R. D., W. W. Jones, G. P. Forney, R. W. Portier, P. A. Reneke, R. W. Bukowski, and J. H. Klote. 1994. An update guide for HAZARD I version 1.2, 151. Gaithersburg, MD: Building and Fire Research Laboratory.
Pope, N. D., and C. G. Bailey. 2006. “Quantitative comparison of FDS and parametric fire curves with post-flashover compartment fire test data.” Fire Saf. J. 41 (2): 99–110. https://doi.org/10.1016/j.firesaf.2005.11.002.
Robert, F., S. Rimlinger, and C. Collignon. 2010. “Structure fire resistance: A joint approach between modelling and full scale testing (substructuring system).” In Proc., 3rd Int. fib Congress. Chicago: Precast Prestressed Concrete Institute.
Sauca, A., T. Gernay, F. Robert, N. Tondini, and J. Franssen. 2016. “Stability in hybrid fire testing.” In Proc., 9th Int. Conf. on Structures in Fire. Princeton, NJ: Princeton Univ.
Wang, X., R. Kim, O. Kwon, and I. Yeo. 2018. “Hybrid simulation method for a structure subjected to fire and its application to a steel frame.” J. Struct. Eng. 144 (8): 04018118. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002113.
Whyte, C. A., K. R. Mackie, and B. Stojadinovic. 2016. “Hybrid simulation of thermomechanical structural response.” J. Struct. Eng. 142 (2): 4015107. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001346.
Yung, D., G. Hadjisophocleous, and G. Proulx. 1997. “Modelling concepts for the risk-cost assessment model firecam and its application to a Canadian Government Office building.” Fire Saf. Sci. 5: 619–630. https://doi.org/10.3801/IAFSS.FSS.5-619.
Zehfuss, J., and D. Hosser. 2007. “A parametric natural fire model for the structural fire design of multi-storey buildings.” Fire Saf. J. 42 (2): 115–126. https://doi.org/10.1016/j.firesaf.2006.08.004.
Zhan, H., and O. Kwon. 2015. “Actuator controller interface program for pseudo- dynamic hybrid simulation.” In Proc., 2015 World Congress on Advances in Structural Engineering and Mechanics. Daejeon, South Korea: Korea Advanced Institute of Science & Technology.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Mar 10, 2018
Accepted: Mar 29, 2019
Published online: Sep 25, 2019
Published in print: Dec 1, 2019
Discussion open until: Feb 25, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.