Seismic Resilience Upgrade of RC Frame Building Using Self-Centering Concrete Walls with Distributed Friction Devices
Publication: Journal of Structural Engineering
Volume 143, Issue 12
Abstract
This paper presents the seismic upgrade of existing frame structures by using the self-centering (SC) concrete wall with friction dampers. Working principle, numerical simulation, and design procedure of the upgrade system are introduced, and application was made in the seismic resilience upgrade of a five-story reinforced concrete (RC) frame building located in a high-seismicity area in China. The original building, as a corridor, connects two adjacent buildings and was evaluated as seismically deficient. Three posttensioned concrete walls with friction devices were therefore used to provide self-centering capacity and supplemental energy dissipation. In situ vibration tests were conducted to obtain dynamic properties of the rehabilitated structure and to validate the numerical model. Dynamic nonlinear analyses of original and upgraded buildings subjected to the design-basis earthquake (DBE) and the maximum considered earthquake (MCE) are conducted, which confirm the design objectives and improved seismic resilience of the upgraded system. In addition, by controlling the deformation pattern of the frame, the weak story failure might be avoided.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The financial support from the Ministry of Science and Technology of the People’s Republic of China under Grant No. 2016YFC0701400 and the National Natural Science Foundation of China under Grant Nos. 51378107 and 51278106 is gratefully acknowledged.
References
Abrahamson, N. A. (1992). “Non-stationary spectral matching.” Seismol. Res. Lett., 63(1), 30.
ACI Innovation Task Group 1 and Collaborators. (2001). Acceptance criteria for moment frames based on structural testing (T1.1-01) and commentary (T1.1R-01), American Concrete Institute, Farmington Hills, MI.
ASCE. (2010). “Minimum design loads for buildings and other structures.” ASCE/SEI 7-10, Reston, VA.
Bocchini, P., Frangopol, D. M., Ummenhofer, T., and Zinke, T. (2014). “Resilience and sustainability of civil infrastructure: Toward a unified approach.” J. Infrastruct. Syst., 04014004.
Brincker, R., Zhang, L. M., and Andersen, P. (2001). “Modal identification of output-only systems using frequency domain decomposition.” Smart Mater. Struct., 10(3), 441–445.
Chou, C. C., Chen, J. H., Chen, Y. C., and Tsai, K. C. (2006). “Evaluating performance of post-tensioned steel connections with strands and reduced flange plates.” Earthquake Eng. Struct. Dyn., 35(9), 1167–1185.
Christopoulos, C., Filiatrault, A., Uang, C. M., and Folz, B. (2002). “Posttensioned energy dissipating connections for moment-resisting steel frames.” J. Struct. Eng., 1111–1120.
Eatherton, M. R., Ma, X., Krawinkler, H., Deierlein, G. G., and Hajjar, J. F. (2014). “Quasi-static cyclic behavior of controlled rocking steel frames.” J. Struct. Eng., 04014083.
FEMA. (2009). “Quantification of building seismic performance factors.” FEMA P695, Washington, DC.
Guo, T., Xu, W. J, Song, L. L., and Wei, L. W. (2014b). “Seismic-isolation retrofits of school buildings: Practice in China after recent devastating earthquakes.” J. Perform. Constr. Facil., 96–107.
Guo, T., Zhang, G., and Chen, C. (2014a). “Experimental study on self-centering concrete wall with distributed friction devices.” J. Earthquake Eng., 18(2), 214–230.
Hancock, J., et al. (2006). “An improved method of matching response spectra of recorded earthquake ground motion using wavelets.” J. Earthquake Eng., 10(S1), 67–89.
He, X. F., Moaveni, B., Conte, J. P., Elgamal, A., and Masri, S. F. (2009). “System identification of Alfred Zampa Memorial Bridge using dynamic field test data.” J. Struct. Eng., 54–66.
Hutt, C. M., Almufti, I., Willford, M., and Deierlein, G. (2016). “Seismic loss and downtime assessment of existing tall steel-framed buildings and strategies for increased resilience.” J. Struct. Eng., 142(8), C4015005.
ICC (International Code Council). (2009). International building code, Country Club Hills, IL.
Kurama, Y. C. (2000). “Seismic design of unbonded post-tensioned precast concrete walls with supplemental viscous damping.” ACI Struct. J., 97(4), 648–658.
Kurama, Y. C., Sause, R., Pessiki, S., and Lu, L. W. (2002). “Seismic response evaluation of unbonded post-tensioned precast walls.” ACI Struct. J., 99(5), 641–651.
Lu, X., and Jiang, H. (2014). “Recent progress of seismic research on tall buildings in China Mainland.” Earthquake Eng. Eng. Vibr., 13(S1), 47–61.
McKenna, F., Fenves, G. L., and Scott, M. H. (2000). Open system for earthquake engineering simulation, Univ. of California, Berkeley, CA.
MHURD-PRC (Ministry of Housing and Urban-Rural Development of the People’s Republic of China). (2010a). “Code for seismic design of buildings.”, Beijing (in Chinese).
MHURD-PRC (Ministry of Housing and Urban-Rural Development of the People’s Republic of China). (2010b). “Code for design of concrete structures.”, Beijing (in Chinese).
Morgen, B., and Kurama, Y. C. (2004). “A friction damper for post-tensioned precast concrete moment frames.” PCI J., 49(4), 112–133.
Ni, S. D., Wang, W. T., and Li, L. (2010). “The April 14th, 2010 Yushu earthquake, a devastating earthquake with foreshocks.” Sci. China Earth Sci., 53(6), 791–793.
OpenSees [Computer software]. UC Berkeley, Berkeley, CA.
Pampanin, S., Kam, W., Haverland, G., and Gardiner, S. (2011). “Expectation meets reality: Seismic performance of post-tensioned precast concrete southern cross endoscopy building during the 22nd Feb 2011 Christchurch earthquake.” NZ Concrete Industry Conf., New Zealand Concrete Society, Auckland, New Zealand.
Perez, F. J., Pessiki, S., and Sause, R. (2004). “Experimental and analytical lateral load response of unbonded post-tensioned precast concrete walls.”, Dept. of Civil Engineer, Bethlehem, PA.
Qu, Z., Wada, A., Motoyui, S., Sakata, H., and Kishiki, S. (2012). “Pin-supported walls for enhancing the seismic performance of building structures.” Earthquake Eng. Struct. Dyn., 41(14), 2075–2091.
Ricles, J. M., Sause, R., and Garlock, M. M. (2001). “Posttensioned seismic-resistant connections for steel frames.” J. Struct. Eng., 113–121.
Song, L. L., Guo, T., and Chen, C. (2014). “Experimental and numerical study of a self-centering prestressed concrete moment resisting frame connection with bolted web friction devices.” Earthquake Eng. Struct. Dyn., 43(4), 529–545.
Wada, A., Qu, Z., Ito, H., Motoyui, S., Sakata, H., and Kasai, K. (2009). “Seismic retrofit using rocking walls and steel dampers.” Proc., ATC/SEI Conf. on Improving the Seismic Performance of Existing Buildings and Other Structures, Applied Technology Council, San Francisco.
Wiebe, L., and Christopoulos, C. (2014). “Controlled rocking systems for enhanced seismic resilience: State of the art.” Sustainable development of critical infrastructure, ASCE, Reston, VA, 496.
Wu, Z., Jiang, C., Li, X., Li, G., and Ding, Z. (2014). “The April 20, 2013, Lushan, Sichuan, China, Earthquake: An overview.” Earthquake phenomenology from the field, Springer, Singapore, 1–12.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Jul 24, 2016
Accepted: May 31, 2017
Published online: Sep 23, 2017
Published in print: Dec 1, 2017
Discussion open until: Feb 23, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.