Ultrahigh-Performance Concrete for Posttensioned Precast Bridge Piers for Seismic Resilience
Publication: Journal of Structural Engineering
Volume 143, Issue 12
Abstract
Precast concrete bridge substructures accelerate construction. Precast concrete piers can also limit residual displacements after earthquakes when used with nonemulative connections. This paper investigates the use of ultrahigh-performance concrete (UHPC) to eliminate damage under moderate to high seismic activity for posttensioned self-centering precast piers. Large-scale laboratory testing was used to assess damage in pier specimens. Specimens were constructed in segments, where the column segment above the foundation had varying details: conventional concrete with mild steel reinforcing bars, UHPC with mild steel reinforcing bars, and UHPC without mild steel reinforcing bars. Specimens were subjected to quasi-static cyclic lateral loading, allowing and disallowing shear slip. The use of UHPC led to minimal damage at displacements much larger than the seismic demand. The difference in damage of UHPC segments with and without mild steel reinforcement was negligible. A comparison of hysteretic responses of different specimens revealed that strength, stiffness, and energy dissipation depended on shear slip more than the material type when shear slip was allowed. For tests without shear slip, specimens with UHPC had higher strength and stiffness.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully acknowledge the financial support provided by Federal Highway Administration (FHWA) through the Multidisciplinary Center for Earthquake Engineering Research (MCEER) of University at Buffalo. Donation of labor and materials by LafargeHolcim for the construction of the specimens is also acknowledged. The results, conclusions, and opinions given in this paper are the ones of the authors and do not necessarily reflect the views of the funding agencies and the parties acknowledged.
References
Anagnostopoulou, M. (2009). “Seismic design and analysis of precast segmental concrete bridge superstructure.” M.Sc. thesis, Univ. of Pavia, Pavia, Italy.
Billington, S., and Yoon, J. (2004). “Cyclic response of unbonded posttensioned precast columns with ductile fiber-reinforced concrete.” J. Bridge Eng., 353–363.
Calvi, G. M., Pavese, A., Rasulo, A., and Bolognini, D. (2005). “Experimental and numerical studies on the seismic response of R.C. hollow bridge piers.” Bull. Earthquake Eng., 3(3), 267–297.
Chopra, A. K. (2007). Dynamics of structures: Theory and applications to earthquake engineering, Prentice-Hall, New Delhi, India.
Chou, C.-C., and Chen, Y.-C. (2006). “Cyclic tests of post-tensioned precast CFT segmental bridge columns with un-bonded strands.” Earthquake Eng. Struct. Dyn., 35(2), 159–175.
Cruz Noguez, C., and Saiidi, M. (2012). “Shake-table studies of a four-span bridge model with advanced materials.” J. Struct. Eng., 183–192.
ElGawady, M., and Sha’lan, A. (2011). “Seismic behavior of self-centering precast segmental bridge bents.” J. Bridge Eng., 328–339.
Guerrini, G., Restrepo, J., Massari, M., and Vervelidis, A. (2014). “Seismic behavior of posttensioned self-centering precast concrete dual-shell steel columns.” J. Struct. Eng., 04014115.
Harris, G. H., and Sabnis, G. (1999). Structural modeling and experimental techniques, 2nd Ed., CRC, Boca Raton, FL.
Hewes, J. T., and Priestley, M. J. N. (2002). “Seismic design and performance of precast concrete segmental bridge columns.”, Univ. of California, San Diego.
Hosseini, F., Gencturk, B., Lahpour, S., and Gil, D. I. (2015). “An experimental investigation of innovative bridge columns with engineered cementitious composites and Cu-Al–Mn super-elastic alloys.” Smart Mater. Struct., 24(8), 085029.
Ichikawa, S., Matsuzaki, H., Moustafa, A., ElGawady, M., and Kawashima, K. (2016). “Seismic-resistant bridge columns with ultrahigh-performance concrete segments.” J. Bridge Eng., 04016049.
Lafarge Canada. (2009). “Product data sheet: JS 1000.” ⟨http://www.ductal.com/JS1000_2009.pdf⟩ (Jan. 15, 2015).
Lee, W., Jeong, H., Billington, S., Mahin, S., and Sakai, J. (2007). “Post-tensioned structural concrete bridge piers with self-centering characteristics.” Structural Engineering Research Frontiers, Proc., Research Frontiers Sessions of the 2007 Structures Congress, Long Beach, CA, 1–15.
Mander, J. B., and Cheng, C.-T. (1997). “Seismic resistance of bridge piers based on damage avoidance design.”, Univ. at Buffalo, Buffalo, NY.
Marriott, D., Pampanin, S., and Palermo, A. (2009). “Quasi-static and pseudo-dynamic testing of unbonded post-tensioned rocking bridge piers with external replaceable dissipaters.” Earthquake Eng. Struct. Dyn., 38(3), 331–354.
Marsh, L. M., Wernli, M., Garrett, B. E., Stanton, J. F., Eberhard, M. O., and Weinert, M. D. (2011). “Application of accelerated bridge construction connections in moderate-to-high seismic regions.”, Transportation Research Board, Washington, DC.
Mashal, M., and Palermo, A. (2015). “High-damage and low-damage seismic design technologies for accelerated bridge construction.” Structures Congress 2015, ASCE, Reston, VA, 549–560.
Morgen, B., and Kurama, Y. (2004). “A friction damper for post-tensioned precast concrete beam-to-column joints.” PCI J., 49(4), 112–133.
Ou, Y., Chiewanichakorn, M., Aref, A., and Lee, G. (2007). “Seismic performance of segmental precast unbonded posttensioned concrete bridge columns.” J. Struct. Eng., 1636–1647.
Palermo, A., Pampanin, S., and Marriott, D. (2007). “Design, modeling, and experimental response of seismic resistant bridge piers with posttensioned dissipating connections.” J. Struct. Eng., 1648–1661.
Pinto, A., Molina, J., and Tsionis, G. (2003). “Cyclic tests on large-scale models of existing bridge piers with rectangular hollow cross-section.” Earthquake Eng. Struct. Dyn., 32(13), 1995–2012.
Priestley, M., Sritharan, S., Conley, J. R., and Pampanin, S. (1999). “Preliminary results and conclusions from the PRESSS five-storey precast concrete test building.” PCI J., 44(6), 42–67.
Roh, H., and Reinhorn, A. M. (2010). “Hysteretic behavior of precast segmental bridge piers with superelastic shape memory alloy bars.” Eng. Struct., 32(10), 3394–3403.
Russell, H. G., and Graybeal, B. A. (2013). “Ultra-high performance concrete: A state-of-the-art report for the bridge community.”, Federal Highway Administration, Washington, DC.
Sideris, P. (2012). “Seismic analysis and design of precast concrete segmental bridges.” Ph.D. dissertation, Univ. at Buffalo, Buffalo, NY.
Sideris, P., Aref, A., and Filiatrault, A. (2014a). “Large-scale seismic testing of a hybrid sliding-rocking posttensioned segmental bridge system.” J. Struct. Eng., 04014025.
Sideris, P., Aref, A., and Filiatrault, A. (2014b). “Quasi-static cyclic testing of a large-scale hybrid sliding-rocking segmental column with slip-dominant joints.” J. Bridge Eng., 04014036.
Solberg, K., Mashiko, N., Mander, J., and Dhakal, R. (2009). “Performance of a damage-protected highway bridge pier subjected to bidirectional earthquake attack.” J. Struct. Eng., 469–478.
Tazarv, M., and Saiid Saiidi, M. (2015a). “Low-damage precast columns for accelerated bridge construction in high seismic zones.” J. Bridge Eng., 04015056.
Tazarv, M., and Saiidi, M. S. (2015b). “UHPC-filled duct connections for accelerated bridge construction of RC columns in high seismic zones.” Eng. Struct., 99(3), 413–422.
Trono, W., Jen, G., Panagiotou, M., Schoettler, M., and Ostertag, C. (2014). “Seismic response of a damage-resistant recentering posttensioned-HYFRC bridge column.” J. Bridge Eng., 04014096.
Yamashita, R., and Sanders, D. H. (2009). “Seismic performance of precast unbonded prestressed concrete columns.” ACI Struc. J., 106(6), 821–830.
Yang, C., and Okumus, P. (2017). “The influence of segment interface characteristics on seismic performance of post-tensioned precast segmental bridge piers.” PCI Convention and National Bridge Conf., Precast/Prestressed Concrete Institute, Chicago.
Zhu, Z., Ahmad, I., and Mirmiran, A. (2006). “Seismic performance of concrete-filled FRP tube columns for bridge substructure.” J. Bridge Eng., 359–370.
Zohrevand, P., and Mirmiran, A. (2012). “Cyclic behaviour of hybrid columns made of ultra high performance concrete and fiber reinforced polymers.” J. Compos. Constr., 91–99.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: May 6, 2016
Accepted: Jun 5, 2017
Published online: Sep 23, 2017
Published in print: Dec 1, 2017
Discussion open until: Feb 23, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.