Diagonal Tension Field Inclination Angle in Steel Plate Shear Walls
Publication: Journal of Structural Engineering
Volume 143, Issue 7
Abstract
Research was conducted to investigate how the inclination angle of the diagonal tension field action varies in steel plate shear walls (SPSWs) and to determine what optimum constant angle best matches the demands obtained from finite-element (FE) analysis. An FE model was first calibrated against experimental results that surveyed inclination angles across the web plate of an idealized SPSW as a function of drift and that showed significant differences in inclination angles at different locations across the web plate. Then, four real SPSWs with varying aspect ratios and numbers of stories were designed and modeled for FE analyses. The variations in angle in the web plate and along the boundary elements were documented as a function of drift and showed significant variations. Combined moment–axial force demand ratios in the SPSW boundary elements were calculated and compared for all real SPSWs to determine the preferable value of single angle that could be used in design. Overall, using 45° was found to be a reasonable compromise for both horizontal and vertical boundary element (HBE and VBE, respectively) design if a single constant angle is desired. Furthermore, the demand on the web plate is not sensitive to the variation of inclination angle. Consequently, the single angle of 45° is recommended for the design of the entire SPSW.
Get full access to this article
View all available purchase options and get full access to this article.
References
ABAQUS 6.9 [Computer software]. Dassault Systèmes Simulia, Providence, RI.
AISC. (2010). “Seismic provisions for structural steel buildings.”, Chicago.
Choi, I. R., and Park, H. G. (2009). “Steel plate shear walls with various infill plate designs.” J. Struct. Eng., 785–796.
Dastfan, M., and Driver, R. G. (2008). “Flexural stiffness limits for frame members of steel plate shear wall systems.” Proc., Annual Stability Conf., Structural Stability Research Council, Nashville, TN, 321–334.
Driver, R. G., Kulak, G. L., Kennedy, D. J. L., and Elwi, A. E. (1997). “Seismic behavior of steel plate shear walls.”, Univ. of Alberta, Edmonton, AB, Canada.
Elgaaly, M., Caccese, V., and Du, C. (1993). “Post-buckling behavior of steel plate shear walls under cyclic loads.” J. Struct. Eng., 588–605.
Fu, Y., Wang, F., and Bruneau, M. (2017). “Diagonal tension field inclination angle in steel plate shear wall.”, Multidisciplinary Center for Earthquake Engineering Research, State Univ. of New York at Buffalo, NY.
Kharrazi, M. H. K. (2005). “Rational method for analysis and design of steel plate walls.” Ph.D. thesis, Univ. of British Columbia, Vancouver, BC, Canada.
LS-DYNA v971 [Computer software]. Livermore Software Technology Corporation, Livermore, CA.
Lubell, A. S. (1997). “Performance of unstiffened steel plate shear walls under cyclic quasi-static loading.” Master’s thesis, Univ. of British Columbia, Vancouver, BC, Canada.
Purba, R., and Bruneau, M. (2010). “Impact of horizontal boundary elements design on seismic behavior of steel plate shear walls.”, Multidisciplinary Center for Earthquake Engineering Research, State Univ. of New York, Buffalo, Buffalo, NY.
Rezai, M. (1999). “Seismic behavior of steel plate shear walls by shake table testing.” Ph.D. thesis, Univ. of British Columbia, Vancouver, BC, Canada.
Timler, P. A., and Kulak, G. L. (1983). “Experimental study of steel plate shear walls.”, Univ. of Alberta, Edmonton, AB, Canada.
Webster, D. J. (2013). “The inelastic seismic response of steel plate shear wall web plates and their interaction with the vertical boundary members.” Ph.D. thesis, Univ. of Washington, Seattle.
Webster, D. J., Berman, J. W., and Lowes, L. N. (2014). “Experimental investigation of SPSW web plate stress field development and vertical boundary element demand.” J. Struct. Eng., .
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Jul 8, 2016
Accepted: Dec 15, 2016
Published online: Mar 15, 2017
Published in print: Jul 1, 2017
Discussion open until: Aug 15, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.