Pushdown Tests on Masonry Infilled Frames for Assessment of Building Robustness
Publication: Journal of Structural Engineering
Volume 143, Issue 9
Abstract
The research presented in this paper addresses the influence of nonstructural masonry infill on the resistance of multistory buildings to progressive collapse under sudden column loss scenarios. In particular, the structural response of infilled frames in peripheral bays is investigated within the scope of a design-oriented robustness assessment framework previously developed at Imperial College London. This allows due consideration of structural redundancy, ductility, strength, dynamic effects, and energy absorption capabilities in a unified manner. The realistic contribution of masonry panels toward collapse arrest is examined considering the results from full-scale laboratory tests performed on different two-bay frames with brick-masonry infill subjected to incremental pushdown deformation, capturing the dominant deformation mode found following removal of an edge column. In these physical tests, it is observed that the failure mechanisms and damage patterns displayed by the infill panels under pushdown deformation are similar to those activated by lateral pushover loading. Clear evidence of diagonal cracking and shear sliding, eventually culminating in crushing of the compressed corners, is noted. Different infill configurations are tested, including central openings and an initial gap between masonry and frame elements. Overall, a global stable response is observed even in the presence of severe damage in the masonry panels, delivering a monotonic supply of energy absorption with increasing downward displacement. The outcome from this experimental research provides mechanically sound and quantifiable evidence that nonstructural masonry infill panels in peripheral frames offer a reliable and efficient source of enhanced robustness under column loss events. Because of the widespread application of masonry infill panels, this is believed to be particularly relevant within the context of retrofitting operations for robustness enhancement of existing structures, as a result of the growing demand for upgraded resilience of urban infrastructure. Similarly, due account for masonry infill subject to proper quality control during the construction process is recommended for rational robustness design of new buildings.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge the support provided by the Portuguese Foundation for Science and Technology (FCT) through the doctoral grant SFRH/BD/70935/2010 to the first author. The authors also acknowledge Dr. Franco Trevisan for his assistance during the construction of the specimens, execution of the tests, and data collection.
References
Adaros, M., and Smilowitz, R. (2014). “Challenges and considerations for the retrofit of existing structures for progressive collapse.” J. Perform. Constr. Facil., 29(5), B4014001-1–B4014001-9.
Arup (2011). Review of international research on structural robustness and disproportionate collapse, Dept. for Communities and Local Government, DCLG Publications, London.
CEN (European Committee for Standardization). (2006). “Actions on structures. Part 1–7: General actions—Accidental actions.” Eurocode 1 EN 1991-1-7, Brussels, Belgium.
Cormie, D., Mays, G., and Smith, P., (2009). Blast effects on buildings, Thomas Telford Publishers, London.
El-Dakhakhni, W., Elgaaly, M., and Hamid, A. (2003). “Three-strut model for concrete masonry-infilled steel frames.” J. Struct. Eng., 177–185.
Farazman, S., Izzuddin, B. A., and Cormie, D. (2013). “Influence of unreinforced masonry infill panels on the robustness of multi-storey buildings.” J. Perform. Constr. Facil., 673–682.
Izzuddin, B. A. (2010). “Robustness by design—Simplified progressive collapse assessment of building structures.” Stahlbau, 79(8), 556–564.
Izzuddin, B. A., and Nethercot, D. A. (2009). “Design-oriented approaches for progressive collapse assessment: Load-factor vs ductility-centered methods.” Structures 2009: Don’t Mess with Structural Engineers, ASCE, Reston, VA, 1791–1800.
Izzuddin, B. A., Vlassis, A. G., Elghaz1ouli, A. Y., and Nethercot, D. A. (2008). “Progressive collapse of multi-storey buildings due to sudden column loss—Part I: Simplified assessment framework.” Eng. Struct., 30(5), 1308–1318.
Li, B., and Qian, K. (2014). “Are the frail designed to fail? Assessing the collapse risk of existing structures.” Structures Congress 2015, ASCE, Reston, VA.
Mosalam, K. M., and Gunay, S. (2015). “Progressive collapse of reinforced concrete frames with unrienforced masonry infill walls considering in-plane/out-of-plane interaction.” Earthq. Spec., 31(2), 921–943.
Naderi, D., Adaros, M., and Wood, S. (2015). “Use of ring beams for progressive collapse retrofit.” Structures Congress 2015, ASCE, Reston, VA.
Negro, P., and Colombo, A. (1997). “Irregularities induced by nonstructural masonry panels in framed buildings.” Eng. Struct., 19(7), 576–585.
Smith, P. P., Byfield, M. P., and Goode, D. J. (2010). “Building robustness research during World War II.” J. Perform. Constr. Facil., 529–535.
Vlassis, A. G., Izzuddin, B. A., Elghazouli, A. Y., and Nethercot, D. A. (2008). “Progressive collapse of multi-storey buildings due to sudden column loss—Part II: Application.” Eng. Struct., 30(5), 1424–1438.
Xavier, F. B. (2015). “The role of masonry infill in progressive collapse mitigation of multi-storey buildings.” Ph.D. thesis, Dept. of Civil and Environmental Engineering, Imperial College London, London.
Xavier, F. B., Macorini, L., and Izzuddin, B. A. (2015). “Robustness of multistory buildings with masonry infill.” J. Perform. Constr. Facil., B4014004-1–B4014004-12.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Jan 23, 2016
Accepted: Dec 15, 2016
Published online: May 11, 2017
Published in print: Sep 1, 2017
Discussion open until: Oct 11, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.