Direct Analysis of an Ultrahigh-Voltage Lattice Transmission Tower Considering Joint Effects
Publication: Journal of Structural Engineering
Volume 143, Issue 5
Abstract
Transmission towers play an important role in transmitting electricity in a power grid safely and reliably. In traditional design practice, the second-order (frame side sway) and (member curvature) effects and joint effects such as load eccentricities, slippage effects, and semirigid connection are commonly ignored in analysis. Great discrepancy is frequently noted between full-scale tower tests and numerical simulations using first-order linear analysis. In this paper, second-order direct analysis is used and slippage of bolted joints as well as semirigid connection behavior are taken into account. Member initial bowing and frame out-of-plumbness imperfections are considered in the present study, which is verified by full-scale test on an ultrahigh-voltage (UHV) lattice transmission tower. The technique of semirigid design and simulation of joint stiffness for load eccentricity by simple modeling for transmission towers meeting the requirements for direct analysis with verification by a full-scale test is unavailable in literature and proposed in this paper. Furthermore, the influences of joint slippage on the deflection and load behavior of the studied towers are quantified and reported.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge the financial support provided by the Natural Science Foundation of China (51408221), Natural Science Foundation of Hebei Province of China (E2015502016), Fundamental Research Funds for the Central Universities of China (2014ZD36), and the science and technology projects of Eastern Inner Mongolia Electric Power Co., Ltd (the cryogenic mechanical property of tower member in Eastern Inner Mongolia area). They are grateful for financial support from the Research Grant Council of the Hong Kong SAR Government on the projects “Second-Order Analysis of Flexible Steel Cable Nets Supporting Debris (PolyU 152008/15E),” “Second-Order and Advanced Analysis of Arches and Curved Structures (PolyU 152012/14E),” and the Hong Kong Branch of Chinese National Engineering Research Centre for Steel Construction supported by The Innovation and Technology Fund of the Hong Kong SAR Government for the project “Advanced Numerical Analyses for Building Structures Using High Performance Steel Materials.”
References
Ahmed, K. I. E., Rajapakse, R. K. N. D., and Gadala, M. S. (2009). “Influence of bolted-joint slippage on the response of transmission towers subjected to frost-heave.” Adv. Struct. Eng., 12(1), 1–17.
AISC-LRFD (American Institute of Steel Construction-Load and Resistance Factor Design). (2010). “Specification for structural steel buildings.”, Chicago.
Albermani, F., Kitipornchai, S., and Chan, R. W. K. (2009). “Failure analysis of transmission towers.” Eng. Fail. Anal., 16(6), 1922–1928.
Albermani, F. G. A., and Kitipornchai, S. (1990). “Nonlinear-analysis of thin-walled structures using least element member.” J. Struct. Eng., 215–234.
Albermani, F. G. A., and Kitipornchai, S. (2003). “Numerical simulation of structural behaviour of transmission towers.” Thin Walled Struct., 41(2–3), 167–177.
ASCE. (2000). “Design of latticed steel transmission structures.”, Reston, VA.
Chan, S. L., and Cho, S. H. (2002). “Design of steel frames using calibrated design curves for buckling strength of hot-rolled members.” Proc. of 3rd Int. Conf. on Advances in Steel Structures ICASS'02, Hong Kong, 1193–1199.
Chan, S. L., and Cho, S. H. (2008). “Second-order analysis and design of angle trusses. Part I: Elastic analysis and design.” Eng. Struct., 30(3), 616–625.
Chan, S. L., and Gu, J. X. (2000). “Exact tangent stiffness for imperfect beam-column members.” J. Struct. Eng., 1094–1102.
Chen, W. F., and Chan, S. L. (1995). “2nd-order inelastic analysis of steel frames using element with midspan and end springs.” J. Struct. Eng., 530–541.
Cho, S. H., and Chan, S. L. (2008). “Second-order analysis and design of angle trusses. Part II: Plastic analysis and design.” Eng. Struct., 30(3), 626–631.
COPHK (Code of practice for structural uses of steel in Hong Kong). (2011). “Code of practice for the structural use of steel 2011.” Buildings Dept., Hong Kong SAR Government, People’s Republic of China.
EPCRI (Electric Power Construction Research Institute of State Grid Corporation). (2009). “Experimental report of 1000 kV Anhui-to-East transmission lines project (SJ3021).” Beijing.
Fong, M., Cho, S. H., and Chan, S. L. (2009). “Design of angle trusses by codes and second-order analysis with experimental verification.” J. Constr. Steel Res., 65(12), 2140–2147.
Galambos, T. V., Usami, T., and Trahair, N. S. (1969). “Eccentrically loaded single angle columns.”, Civil and Environmental Engineering Dept., School of Engineering and Applied Science, Washington Univ., St. Louis.
Jiang, W. Q., Wang, Z. Q., McClure, G., Wang, G. L., and Geng, J. D. (2011). “Accurate modeling of joint effects in lattice transmission towers.” Eng. Struct., 33(5), 1817–1827.
Kitipornchai, S., Albermani, F. G. A., and Peyrot, A. H. (1994). “Effect of bolt slippage on ultimate behavior of lattice structures.” J. Struct. Eng., 2281–2287.
Kitipornchai, S., Zhu, K., Xiang, Y., and Al-Bermani, F. G. A. (1991). “Single-equation yield surfaces for monosymmetric and asymmetric sections.” Eng. Struct., 13(4), 366–370.
Knight, G. M. S., and Santhakumar, A. R. (1993). “Joint effects on behavior of transmission towers.” J. Struct. Eng., 698–712.
Lee, P. S., and McClure, G. (2006). “A general three-dimensional L-section beam finite element for elastoplastic large deformation analysis.” Comput. Struct., 84(3–4), 215–229.
Lee, P. S., and McClure, G. (2007). “Elastoplastic large deformation analysis of a lattice steel tower structure and comparison with full-scale tests.” J. Constr. Steel Res., 63(5), 709–717.
Liu, Y. P., and Chan, S. L. (2011). “Second-order and advanced analysis of structures allowing for load and construction sequences.” Adv. Struct. Eng., 14(4), 635–646.
Marjerrison, M. M. (1968). “Electric transmission tower design.” J. Struct. Div., Proc. Am. Soc. Civ. Eng., 94, 1–23.
NIDA. (2015). “User’s manual, nonlinear integrated design and analysis.” ⟨http://www.nidacse.com⟩ (Sep. 24, 2011).
NIDA version 9.0 [Computer software]. Hong Kong Polytechnic Univ., Hong Kong.
Petersen, W. O. (1962). “Design of EHV steel tower transmission lines.” J. Power Div., 88, 39–65.
Ungkurapinan, N. (2000). “A study of joint slip in galvanized bolted angle connections.” Master’s thesis, Univ. of Manitoba, Winnipeg, MB, Canada.
Ungkurapinan, N., Chandrakeerthy, S. R. D., Rajapakse, R. K. N. D., and Yue, S. B. (2003). “Joint slip in steel electric transmission towers.” Eng. Struct., 25(6), 779–788.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: May 10, 2016
Accepted: Oct 27, 2016
Published online: Jan 27, 2017
Published in print: May 1, 2017
Discussion open until: Jun 27, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.