Behavior of Concrete-Encased CFST Members under Axial Tension
Publication: Journal of Structural Engineering
Volume 142, Issue 2
Abstract
This paper studies the behavior of concrete-encased concrete-filled steel tube (CFST) members under axial tension. Experimental results of thirteen specimens were reported. The variables in the test were the diameter of the steel tube, bond condition between the inner CFST and outer reinforced concrete (RC) components. Push-out tests were conducted to investigate the bond performance between the inner CFST and outer RC components. A finite element model (FEM) was then developed to perform further analysis on the tensile behavior of the concrete-encased CFST member. The internal load distribution between the inner CFST and outer RC components, the interaction between the core concrete and steel tube, and the interaction between the outer concrete and steel tube were investigated. The core concrete and steel tube worked together well, and the tensile strength of the steel tube was enhanced because of the “composite effect,” while the outer RC component was separated from the inner CFST and thus worked independently. In addition, the bond strength between the steel tube and outer concrete is larger than that between the steel tube and core concrete. Based on the full range analysis and parametric analysis, a simplified model was proposed to predict the tensile strength of concrete-encased CFST members, and generally good agreement was achieved between the predictions and test results.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research reported in this paper is part of the Project 51378290 supported by the National Natural Science Foundation of China (NSFC), the Specialized Research Fund for the Doctoral Program of Higher Education (SRFDP) (20110002110017) and the Tsinghua Initiative Scientific Research Program (No. 20131089347). The financial support is highly appreciated.
References
ABAQUS [Computer software]. SIMULIA, Providence, RI.
An, Y. F., and Han, L. H. (2014). “Behaviour of concrete-encased CFST columns under combined compression and bending.” J. Constr. Steel Res., 101(Oct), 314–330.
Han, L. H., and An, Y. F. (2014). “Performance of concrete-encased CFST stub columns under axial compression.” J. Constr. Steel Res., 93(1), 62–76.
Han, L. H., He, S. H., and Liao, F. Y. (2011). “Performance and calculations of concrete filled steel tubes (CFST) under axial tension.” J. Constr. Steel Res., 67(11), 1699–1709.
Han, L. H., Li, W., and Bjorhovde, R. (2014). “Developments and advanced application of concrete-filled steel tubular (CFST) structures: Members.” J. Constr. Steel Res., 100(9), 211–228.
Han, L. H., Yao, G. H., and Tao, Z. (2007). “Performance of concrete filled thin-walled steel tubes under pure torsion.” Thin-Walled Struct., 45(1), 24–36.
Hillerborg, A., Modeer, M., and Petersson, P. E. (1976). “Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite element.” Cem. Concr. Res., 6(6), 773–781.
Ji, X. D., Kang, H. Z., Chen, X. C., and Qian, J. R. (2014). “Seismic behavior and strength capacity of steel tube reinforced concrete composite columns.” Earthquake Eng. Struct. Dyn., 43(4), 487–505.
Li, W., Han, L. H., and Chan, T. M. (2014). “Numerical investigation on the performance of concrete-filled double-skin tubular members under tension.” Thin-Walled Struct., 79, 108–118.
Li, W., Han, L. H., and Chan, T. M. (2015). “Performance of concrete-filled steel tubes subjected to eccentric tension.” J. Struct. Eng., 04015049.
Nezamian, A., Al-Mahaidi, R., and Grundy, P. (2006). “Bond strength of concrete plugs embedded in tubular steel piles under cyclic loading.” Can. J. Civ. Eng., 33(2), 111–125.
Roeder, C. W., Cameron, B., and Brown, C. B. (1999). “Composite action in concrete filled tubes.” J. Struct. Eng., 477–484.
Sakino, K., Nakahara, H., Morino, S., and Nishiyama, I. (2004). “Behavior of centrally loaded concrete-filled steel-tube short columns.” J. Struct. Eng., 180–188.
Tao, Z., Han, L. H., Uy, B., and Chen, X. (2011). “Post-fire bond between the steel and concrete in concrete-filled steel tubular columns.” J. Constr. Steel Res., 67(3), 484–496.
Tao, Z., and Yu, Q. (2012). “Residual bond strength in steel reinforced concrete columns after fire exposure.” Fire Saf. J., 53, 19–27.
Virdi, K. S., and Dowling, P. J. (1980). “Bond strength in concrete filled steel tubes.” IABSE Proc., 33(80), 125–139.
Wang, Z. B., Yu, Q., and Tao, Z. (2015). “Behaviour of CFRP externally-reinforced circular CFST members under combined tension and bending.” J. Constr. Steel Res., 106(3), 122–137.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Mar 29, 2015
Accepted: Aug 18, 2015
Published online: Oct 21, 2015
Published in print: Feb 1, 2016
Discussion open until: Mar 21, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.