Simplified Shear Design of Slender Reinforced Concrete Beams with Stirrups
This article has a reply.
VIEW THE REPLYPublication: Journal of Structural Engineering
Volume 142, Issue 2
Abstract
For simplified shear design of slender reinforced concrete (RC) beams with stirrups, a modified variable-angle truss model is developed in this paper. In this model, an analytical solution of the inclination of struts () is derived by combining the theory of plasticity and the concrete softening of the modified compression field theory (MCFT). It is found that there is a decreasing linear relationship between and , where is the natural logarithm of the mechanical shear-reinforcement ratio. On this basis, a new shear design equation is proposed for slender RC beams with stirrups, which is shown to be not only simpler, but to also provide improved prediction compared with the shear design provisions of some of the existing codes.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study was supported by National Natural Science Foundation of China (51408116 and 51278120), Natural Science Foundation of Jiangsu Province (BK20140630), and Transportation Research Program of Jiangsu Province (2014Y01). The financial supports are greatly appreciated.
References
AASHTO. (2014). “LRFD bridge design specifications.” Washington, DC.
ACI (American Concrete Institute). (2011). “Building code requirements for structural concrete and commentary.” ACI 318R-11, Farmington Hills, MI.
ASCE. (1998). “Recent approaches to shear design of structural concrete.” J. Struct. Eng., 1375–1417.
CEN (Committee for Standardization. (2005). “Eurocode 2—Design of concrete structures: Part 1–1. General rules and rules for buildings.” CEN 1992-1-1, Brussels.
Cladera, A., and Mari, A. R. (2007). “Shear strength in the new Eurocode 2. A step forward?” Struct. Concr., 8(2), 57–66.
Collins, M. P., Bentz, E. C., Sherwood, E. G., and Xie, L. (2008). “An adequate theory for the shear strength of reinforced concrete structures.” Mag. Concr. Res., 60(9), 635–650.
Denis, M., and Collins, M. P. (2013). “Revision of strut-and-tie provisions in the AASHTO LRFD bridge design specifications.”, MDC Research, Dorion, QC, Canada, 80.
Foster, S. J., and Malik, A. R. (2002). “Evaluation of efficiency factor models used in strut-and-tie modeling of nonflexural members.” J. Struct. Eng., 569–577.
Hoang, L. C., and Nielsen, M. P. (1998). “Plasticity approach to shear design.” Cem. Concr. Comp., 20(6), 437–453.
Lee, J. Y., and Hwang, H. B. (2010). “Maximum shear reinforcement of reinforced concrete beams.” ACI Struct. J., 107(5), 580–588.
Li, B., and Tran, C. H. N. (2012). “Determination of inclination of strut and shear strength using variable angle truss model for shear-critical RC beam.” Struct. Eng. Mech., 41(4), 459–477.
Nielsen, M. P. (1984). Limit analysis and concrete plasticity, Prentice-Hall, Englewood Cliffs, NJ, 420.
Rangan, B. V. (1991). “Web crushing strength of reinforced and prestressed concrete beams.” ACI Struct. J., 88(1), 12–16.
Reineck, K. H., Bentz, E., Fitik, B., Kuchma, D. A., and Bayrak, O. (2014). “ACI-DAfStb databases for shear tests on slender reinforced concrete beams with stirrups.” ACI Struct. J., 111(5), 1147–1156.
Roller, J. J., and Russell, H. G. (1990). “Shear strength of high-strength concrete beams with web reinforcement.” ACI Struct. J., 87(2), 191–198.
Thürlimann, B. (1979). “Plastic analysis of reinforced concrete beams.” Proc., IABSE Colloquium on Plasticity in Reinforced Concrete, International Association for Bridge and Structural Engineering (IABSE), Zurich, Switzerland, 71–90.
Vecchio, F. J., and Collins, M. P. (1986). “The modified compression field theory for reinforced concrete elements subjected to shear.” ACI J. Proc., 83(2), 219–231.
Walraven, J., Belletti, B., and Esposito, R. (2013). “Shear capacity of normal, lightweight, and high-strength concrete beams according to Model Code 2010. I: Experimental results versus analytical model results.” J. Struct. Eng., 1593–1599.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Jan 15, 2015
Accepted: Jul 9, 2015
Published online: Aug 20, 2015
Discussion open until: Jan 20, 2016
Published in print: Feb 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.