Timber Steel Fiber–Reinforced Concrete Floor Slabs in Fire: Experimental and Numerical Modeling
Publication: Journal of Structural Engineering
Volume 141, Issue 9
Abstract
Timber–concrete composite floors represent an efficient possibility for strengthening timber beam ceilings and stiffening timber frame structures. The results of this construction method are higher stiffness and load bearing capacity, improved sound insulation, and better fire resistance. Replacing conventional RC with an innovative and efficient material, such as fiber RC, leads to improvements in the construction progress, material properties, and load transfer and to a reduction in the slab thickness. The subject of this paper is the numerical simulation of the behavior of composite timber-fiber concrete floor, consisting of a fiber concrete slab and timber beams. The primary point of this work is to explore the membrane action of the fiber concrete slab with timber beams and investigate the behavior of the load floor structure by using finite-element (FE) models. This paper presents a three-dimensional FE model developed to predict the mechanical behavior of timber-fiber concrete composite floors, to derive simpler models for representing the partially protected composite floors in fire. The analysis of these structures is nonlinear and considers the orthotropic behavior for timber and isotropic behavior for concrete. The description of the model, general parameters, and values are given in this paper. All modeling was prepared by using an FE software program. The numerical models are validated against the results of full-scale furnace, material property, push-out, and beam tests.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research is carried out by the support of the research project of the Grant Agency of Czech Republic No. P105/10/2159 and by the European Union, OP RDI project No. CZ.1.05/2.1.00/03.0091—University Centre for Energy Efficient Buildings.
References
ANSYS [Computer software]. Pennsylvania, PA, Ansys.
Bednář, J., Wald, F., Vodička, J., and Kohoutková, A. (2012). “Membrane action of composite fiber concrete slab in fire.” Procedia Eng., 40(40), 498–503.
Bednář, J., Wald, F., Vodička, J., and Kohoutková, A. (2013). “Experiments on membrane action of composite floors with steel fiber reinforced concrete slab exposed to fire.” Fire Saf. J., 59, 111–121.
Bittnar, Z., and Šejnoha, J. (1992). Numerical method in mechanics, CTU, Prague.
Caldová, E., Vymlátil, P., Kloiber, M., Uruschadze, S., and Wald, F. (2014). “Connectors of timber steel fiber reinforced composite beam.” Wood Res., in press.
Ekr, J., Caldová, E., Blesák, L., and Wald, F. (2014). “Design model for timber and steel fiber reinforced concrete floor.” J. Struct. Eng., in press.
European Committee for Standardization (CEN). (2002). “Testing hardened concrete—Part 3: Compressive strength of test specimens.” 12390-3, Brussels, Belgium.
European Committee for Standardization (CEN). (2005a). “Eurocode 2: Design of concrete structures—Part 1-1: General rules for buildings.” 1992-1-1, Brussels, Belgium.
European Committee for Standardization (CEN). (2005b). “Eurocode 2: Design of concrete structures—Part 1-2: General rules—Structural fire design.” 1992-1-2, Brussels, Belgium.
European Committee for Standardization (CEN). (2005c). “Eurocode 5: Design of timber structures—Part 1-1: General—Common rules and rules for buildings.” 1995-1-1, Brussels, Belgium.
European Committee for Standardization (CEN). (2005d). “Eurocode 5: Design of timber structures—Part 1-2: General—Structural fire design.” 1995-1-2, Brussels, Belgium.
Frangi, A., Knobloch, M., and Fontana, M. (2010). “Fire design of timber-concrete composite slabs with screwed connections.” J. Struct. Eng., 219–228.
Holschemacher, K., Klotz, S., and Weise, D. (2002). “Application of steel fiber reinforced concrete for timber-concrete composite constructions.” Lacer, 7, 161–170.
Kodur, V. K. R., and Baingo, D. (1998). “Fire resistance of FRP reinforced concrete slabs.”, Institute for Research in Construction, National Research Council of Canada, Ottawa, ON, Canada, 37.
Kodur, V. K. R., and Fike, R. (2011). “Enhancing the fire resistance of composite floor assemblies through the use of steel fiber reinforced concrete.” Eng. Struct., 33(10), 2870–2878.
Lie, T. T., and Kodur, V. R. (1996). “Thermal and mechanical properties of steel-fiber-reinforced concrete at elevated temperatures.” Can. J. Civ. Eng., 23(2), 511–517.
Yeoh, D., Fragiacomo, M., Franceschi, M., and Heng Boon, K. (2011). “State of the art on timber-concrete composite structures: Literature review.” J. Struct. Eng., 1085–1095.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jan 17, 2014
Accepted: Aug 25, 2014
Published online: Oct 9, 2014
Discussion open until: Mar 9, 2015
Published in print: Sep 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.