Modeling and Shock Tube Testing of Architectural Glazing Systems for Blast Resistance
Publication: Journal of Structural Engineering
Volume 141, Issue 7
Abstract
Building envelope is a critical line of defense against external explosions, and laminated glass can greatly reduce the hazard of flying shards. Blast-resistant glazing research exists, but few areas remain unexplored related to resistance and blast response of the window system, the effect of the negative phase of the blast wave, and the dynamic reactions transmitted to the window frame and supporting structure. Therefore, dynamic numerical simulations and shock tube testing are presented in this paper. The dynamic response, in terms of center deflection and dynamic reactions, is measured and compared with the numerical results using the blast positive and negative phases. The measured dynamic material response of the interlayers was used for the model. The numerical model deflections and dynamic reactions correlated well within the first few peaks of the measured response of the glazing systems. The results of this study can be used to improve existing methods for predicting the response and dynamic reactions of structural glazing under blast, and to provide affordable design recommendations.
Get full access to this article
View all available purchase options and get full access to this article.
References
Amadio, C., and Bedon, C. (2012). “Blast analysis of laminated glass curtain walls equipped by viscoelastic dissipative devices.” J. Build., 2(4), 359–383.
Amstock, J. (1997). Glass in construction, McGraw Hill, New York.
ASTM. (2012a). “Standard practice for determining load resistance of glass in buildings.”, West Conshohocken, PA.
ASTM. (2012b). “Standard practice for specifying an equivalent 3-second duration design loading for blast resistant glazing fabricated with laminated glass.”, West Conshohocken, PA.
ASTM. (2012c). “Standard test method for glazing and glazing systems subject to air-blast loading.”, West Conshohocken, PA.
Biggs, J. M. (1964). Introduction to structural dynamics, McGraw-Hill, New York.
Chung, J. H., Consolazio, G. R., Dinan, R. J., and Rinehart, S. A. (2010). “Finite-element analysis of fluid-structure interaction in a blast-resistant window system.” J. Struct. Eng., 297–306.
DeBelder, K., Pintelon, R., Demol, C., and Roose, P. (2010). “Estimation of the equivalent complex modulus of laminated glass beams and its application to sound transmission loss prediction.” Mech. Syst. Sig. Process., 24(3), 809–822.
Hinman, E. (1995). “Lessons from ground zero—Oklahoma City bombing and bomb-resistant structures.” Secur. Manage. J., 39(10), 26–31.
Hooper, P. A. (2011). “Blast performance of silicone-bonded laminated glass.” Ph.D. thesis, Imperial College London, London.
Hooper, P. A., Sukhram, R. A. M., Blackman, B. R. K., and Dear, J. P. (2012). “On the blast resistance of laminated glass.” Int. J. Solids Struct., 49(6), 899–918.
Kranzer, C., Gürke, G., and Mayrhofer, C. (2005). “Testing of bomb resistant glazing systems. Experimental investigation of the time dependent deflection of blast loaded 7.5 mm laminated glass.” Glass Processing Days forum, Tampére, Finland.
Krauthammer, T., and Altenberg, A. (2000). “Negative phase blast effects on glass panels.” Int. J. Impact Eng., 24(1), 1–17.
Lafta, M. (2012). “Experimental evaluation of laminated glass interlayer under high strain rates.” M.Sc. dissertation, Univ. of Missouri, Columbia, MO.
Larcher, M., and Solomos, G. (2010). “Laminated glass loaded by air blast waves experiments and numerical simulations.” JRC technical notes, 〈http://ipsc.jrc.ec.europa.eu/〉.
Larcher, M., Solomos, G., Casade, F., and Gebbeken, N. (2012). “Experimental and numerical investigations of laminated glass subjected to blast loading.” Int. J. Impact Eng., 39(1), 42–50.
LS-DYNA Version 971 R6.1.0 [Computer software]. Livermore, CA, Livermore Software Technology.
Morison, C. (2007). “The resistance of laminated glass to blast pressure loading and the coefficients for single degree of freedom analysis of laminated glass.” Ph.D. dissertation, Cranfield Univ., Bedford, U.K.
Norville, H. S., and Conrath, E. J. (2001). “Considerations for blast-resistant glazing design.” J. Archit. Eng., 80–86.
Norville, H. S., and Conrath, E. J. (2006). “Blast-resistant glazing design.” J. Archit. Eng., 129–136.
Norville, H. S., Harvill, N., Conrath, E. J., Shariat, S., and Mallonee, S. (1999). “Glass-related injuries in Oklahoma city bombing.” J. Perform. Constr. Facil., 50–56.
Stewart, M. G., and Netherton, M. D. (2008). “Security risks and probabilistic risk assessment of glazing subject to explosive blast loading.” Reliab. Eng. Syst. Saf., 93(4), 627–638.
Unified Facilities Criteria (UFC). (2013). “UFC 4-010-01: DOD minimum antiterrorism standards for buildings.”
Wedding, W. C. (2010). “Experimental study of blast resistant glazing system response to explosive loading.” M.Sc. thesis, Univ. of Kentucky, Lexington, KY.
Wedding, W. C., and Lusk, B. T. (2012). “Novel method to determine blast resistance glazing system response to explosive loading.” Measurement, 45(6), 1471–1479.
Wei, J., and Dharani, L. R. (2005). “Fracture mechanics of laminated glass subject to blast loading.” Theor. Appl. Fract. Mech., 44(2), 157–167.
Wei, J., and Dharani, L. R. (2006). “Response of laminated architectural glazing subjected to blast loading.” Int. J. Impact Eng., 32(12), 2032–2047.
Wei, J., Shetty, M., and Dharani, L. R. (2006). “Failure analysis of architectural glazing subjected to blast loading.” Eng. Fail. Anal., 13(7), 1029–1043.
WINGARD. (2005). “Window glazing analysis response & design—WINGARD—Technical manual.”, U.S. General Services Administration, Applied Research Associates, Washington, DC.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jul 29, 2013
Accepted: Jun 2, 2014
Published online: Aug 14, 2014
Discussion open until: Jan 14, 2015
Published in print: Jul 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.