Three-Dimensional Effects and Collapse Resistance Mechanisms in Steel Frame Buildings
Publication: Journal of Structural Engineering
Volume 140, Issue 8
Abstract
This study investigates the robustness of a seismically designed steel moment frame building using 3-D nonlinear models. Computational simulations are carried out using validated models to investigate building response to loss of internal and external columns as well as columns in lower, middle and upper floors. Studies are conducted to gain insight into the sources of collapse resistance of the prototype building, focusing in particular on the role of composite action between the slab and underlying steel beams and slab membrane action. The simulation results suggest that the prototype building can be more vulnerable to loss of columns in the upper stories than in the lower ones and is particularly vulnerable to loss of interior gravity columns at all floor levels. The role of the slab is quantified and it is shown that it can contribute significantly to the robustness of the structure, but it is a double edge sword that can also be detrimental, especially in the final stages of collapse.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The presented work was supported in part by the Department of Civil and Environmental Engineering at the University of Michigan and the National Science Foundation (NSF) through grant CMMI-0928193. Any opinions, findings, conclusions, and recommendations expressed in this paper are those of the authors and do not necessarily reflect the views of the sponsors.
References
ANSI/AISC 358-10. (2010). Prequalified connections for special and intermediate steel moment frames for seismic applications, American Institute of Steel Construction, Chicago, IL.
Alashker, Y., El-Tawil, S., and Sadek, F. (2010). “Progressive collapse resistance steel-concrete composite floors.” J. Struct. Eng., 1187–1196.
Alashker, Y., Li, H., and El-Tawil, S. (2011). “Approximations in progressive modeling.” J. Struct. Eng., 914–924.
Bao, Y., and Kunnath, S. K. (2010). “Simplified progressive collapse simulation of RC frame-wall structures.” Eng. Struct., 32(10), 3153–3162.
Bao, Y., Kunnath, S. K., El-Tawil, S., and Lew, H. S. (2008). “Macro-model based simulation of progressive collapse: RC frame structures.” J. Struct. Eng., 1079–1091.
Fu, F. (2009). “Progressive collapse analysis of high-rise building with 3-D finite element modeling method.” J. Construct. Steel Res., 65(6), 1269–1278.
Fu, F. (2010). “3-D Nonlinear dynamic progressive collapse analysis of multi-storey steel composite frame buildings—parametric study.” Eng. Struct., 32(12), 3974–3980.
Galal, K., and El-Sawy, T. (2010). “Effect of retrofit strategies on mitigating progressive collapse of steel frame structures.” J. Construct. Steel Res., 66(4), 520–531.
Hallquist, J. (2006). LS-DYNA keyword user’s manual, Livermore Software Technology, Livermore, CA.
Kaewkulchai, G., and Williamson, E. B. (2004). “Beam element formulation and solution procedure for dynamic progressive collapse analysis.” Comput. Struct., 82(7–8), 639–651.
Khandelwal, K., and El-Tawil, S. (2007). “Collapse behavior of steel special moment resisting frame connections.” J. Struct. Eng., 646–655.
Khandelwal, K., and El-Tawil, S. (2011). “Pushdown resistance as a measure of robustness in progressive collapse analysis.” Eng. Struct., 33(9), 2653–2661.
Khandelwal, K., El-Tawil, S., Kunnath, S. K., and Lew, H. S. (2008). “Macro-model based simulations of progressive collapse steel frame structures.” J. Struct. Eng., 1070–1078.
Khandelwal, K., El-Tawil, S., and Sadek, F. (2009). “Progressive collapse analysis of seismically designed steel braced frames.” J. Construct. Steel Res., 65(3), 699–708.
Kim, H. S., Kim, J., and An, D. W. (2009). “Development of integrated system for progressive collapse analysis of building structures considering dynamic effects.” Adv. Eng. Softw., 40(1), 1–8.
Kim, J., and An, D. (2009). “Evaluation of progressive collapse potential of steel moment frames considering catenary action.” Struct. Design Tall Spcl. Buildings, 18(4), 455–465.
Kwasniewski, L. (2010). “Nonlinear dynamic simulations of progressive collapse for a multistory building.” Eng. Struct., 32(5), 1223–1235.
Liang, X., Shen, Q., and Ghosh, S. K. (2006). “Assessing ability of seismic structural system to withstand progressive collapse: Seismic design and progressive collapse analysis of steel frame buildings.” Rep. Prepared for SK Ghosh and Associates, SK Ghosh and Associates, Palatine, IL.
Main, J. A. (2009). “Development of 3D models of steel moment-frame buildings for assessment of robustness and progressive collapse vulnerability.” Struct. Congress, ASCE, Reston, VA.
Mohamed, O. A. (2009). “Assessment of progressive collapse potential in corner floor panels of reinforced concrete buildings.” Eng. Struct., 31(3), 749–757.
Masoero, E., Wittel, F. K., Herrmann, H. J., and Chiaia, B. M. (2010). “Progressive collapse mechanisms of brittle and ductile framed structures.” J. Eng. Mech., 987–995.
Pekau, O. A., and Cui, Y. (2006). “Progressive collapse simulation of precast panel shear walls during earthquakes.” Comput. Struct., 84(5–6), 400–412.
Ruth, P., Marchand, K. A., and Williamson, E. B. (2006). “Static equivalency in progressive collapse alternate path analysis: Reducing conservatism while retaining structural integrity.” J. Perform. Construct. Facili., 349–364.
Sadek, F., El-Tawil, S., and Lew, H. S. (2008). “Robustness of composite floor system with shear connections: Modeling, simulation, and evaluation.” J. Struct. Eng., 1717–1725.
Sadek, F., Main, J. A., Lew, H. S., Robert, S. D., Chiarito, V. P., and El-Tawil, S. (2010). “An experimental and analytical study of steel moment connections under a column removal scenario.” NIST Rep., National Institute of Standards and Technology, U.S. Dept. of Commerce, Gaithersburg, MD.
Sasani, M., and Kropelnicki, J. (2008). “Progressive collapse analysis of an RC structure.” Struct. Design Tall Special Buildings, 17(4), 757–771.
Szyniszewski, S. (2009). “Probabilistic approach to progressive collapse prevention. Physics based simulations.” Proc., ASCE Structures Congress, ASCE, Reston, VA.
Talaat, M., and Mosalam, K. M. (2009). “Modeling progressive collapse in reinforced concrete buildings using direct element removal.” Earthquake Eng. Struct. Dynam., 38(5), 609–634.
Tsai, M. H., and Lin, B. H. (2008). “Investigation of progressive collapse resistance and inelastic response for an earthquake-resistant RC building subjected to column failure.” Eng. Struct., 30(12), 3619–3628.
U.S. General Service Administration (GSA). (2003). Progressive collapse analysis and design guidelines for new federal office building and major modernization project, Washington, DC.
UFC. (2009). UFC 4-023-03: design of buildings to resist progressive collapse, Dept. of Defense, Washington, DC.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Sep 24, 2012
Accepted: Mar 11, 2013
Published online: Mar 13, 2013
Published in print: Aug 1, 2014
Discussion open until: Oct 20, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.