Simulation of Seismic Collapse in Nonductile Reinforced Concrete Frame Buildings with Masonry Infills
Publication: Journal of Structural Engineering
Volume 140, Issue 8
Abstract
Improved analysis methods and guidelines are presented to simulate the seismic collapse of nonductile concrete frame buildings with masonry infills. The analysis tools include an inelastic dual-strut model that captures the post-peak behavior of the masonry infill and its interaction with the surrounding frame. The dual compression struts capture the column-infill interaction that can cause shear failure of the columns and loss of their vertical load carrying capacity. A rigid softening shear degradation model is implemented in the beam-column elements to capture the shear failure of nonductile RC columns. Guidelines are presented to determine the strut model parameters based on data from 14 experimental tests on infill frames. The models are applied in three-dimensional nonlinear dynamic analyses of a three-story nonductile concrete frame prototype building with infills. The incremental dynamic analyses technique is utilized to understand the effect of the infill-column interaction and the rocking of shallow foundations on collapse performance, including a parameter study to examine the sensitivity of the results to the assumed strength and deformation parameters of the infill walls. Collapse assessment of the prototype building indicates that incorporating infill strut-column interaction and the shear degradation of columns is critical to the prediction of the collapse capacity of nonductile infill frames. Otherwise, the omission of this deterioration mechanism leads to unconservative collapse capacity predictions. The analyses further demonstrate that rocking of shallow foundations has a favorable effect on the collapse performance of infill frames and that the infill strut strength has considerably greater influence on collapse performance than the infill strut deformation parameters.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Financial support provided to the first author from the Blume Center for Earthquake Engineering, the Engineering Diversity Program and the Diversifying Academia Recruiting Excellence (DARE) Fellowship at Stanford University are gratefully acknowledged. This research is motivated in part by the EERI Framed Infill Network (www.framedinfill.org) initiative and a collaborative project with GeoHazards International. The authors also acknowledge valuable discussions on the research with K. Mosalam, D. Mar, J. Rogers, and S. Billington.
References
ASCE. (2007). “Seismic rehabilitation of existing buildings.”, Reston, VA.
ASCE. (2010). “Minimum design loads for buildings and other structures.”, Reston, VA.
Asteris, P. (2003). “Lateral stiffness of brick masonry infilled plane frames.” J. Struct. Eng., 1071–1079.
Blackard, B., William, K., and Mettupulayam, S. (2009). “Experimental observations of masonry infilled reinforced concrete frames with openings.” Special Publication SP-265, American Concrete Institute, Farmington Hills, MI.
Chrysostomou, C. (1991). “Effects of degrading infill walls on the nonlinear seismic response of two-dimensional steel frames.” Ph.D. dissertation, Dept. of Civil and Environmental Engineering, Cornell Univ., Ithaca, NY.
Colangelo, F. (2005). “Pseudo-dynamic seismic response of reinforced concrete frames infilled with non-structural brick masonry.” Earthquake Eng. Struct. Dyn., 34(10), 1219–1241.
Dolsek, M., and Fajfar, P. (2008). “The effect of masonry infills on the seismic response of a four-story reinforced concrete frame—A deterministic assessment.” Eng. Struct., 30(7), 1991–2001.
Elwood, K., et al. (2007). “Update to ASCE/SEI 41 concrete provisions.” Earthquake Spectra, 23(3), 493–523.
FEMA. (2009). “Quantification of building seismic performance factors.”, Applied Technology Council, Redwood City, CA.
Giannakas, A., Patronis, D., and Fardis, M. (1987). “The influence of the position and the size of openings to the elastic rigidity of infill walls.” Proc., 8th Hellenic Concrete Conf., Hellenic Concrete Society, 49–56.
Haselton, C., and Deierlein, G. (2007). “Assessing seismic collapse safety of modern reinforced concrete frame buildings.” Ph.D. dissertation, Dept. of Civil and Environmental Engineering, Stanford Univ., Stanford, CA.
Haselton, C. B., Liel, A. B., Lange, S. L., and Deierlein, G. (2008). “Beam-column element model calibrated for predicting flexural response leading to global collapse of RC frame buildings.” Pacific Earthquake Engineering Research Center, Berkeley, CA.
Ibarra, L. F., Medina, R. A., and Krawinkler, H. (2005). “Hysteretic models that incorporate strength and stiffness deterioration.” Earthquake Eng. Struct. Dyn., 34(12), 1489–1511.
Kyriakides, M. (2011). “Seismic retrofit of unreinforced masonry infills in non-ductile reinforced concrete frames using engineered cementitous composites.” Ph.D. dissertation, Dept. of Civil and Environmental Engineering, Stanford Univ., Stanford, CA.
Lignos, D. G., and Krawinkler, H. (2013). “Development and utilization of structural component databases for performance-based earthquake engineering.” J. Struct. Eng., 1382–1394.
Mehrabi, A. B., Shing, P. B., Schuller, M., and Noland, J. (1996). “Performance of masonry-infilled reinforced concrete frames under in-plane lateral loads.”, Dept. of Civil, Environmental and Architectural Engineering, Univ. of Colorado at Boulder, Boulder, CO.
Mondal, G., and Jain, K. (2008). “Lateral stiffness of masonry infilled reinforced concrete frames with central opening.” Earthquake Spectra, 24(3), 701–723.
Open System for Earthquake Engineering Simulation (OpenSees) [Computer software]. Pacific Earthquake Engineering Research Center, Univ. of California, Berkeley.
Saneinejad, A., and Hobbs, B. (1995). “Inelastic design of infilled frames.” J. Struct. Eng., 634–650.
Sattar, S., and Liel, A. (2010). “Seismic performance of concrete frame structures with and without masonry infill walls.” 9th US National and 10th Canadian Conf. on Earthquake Engineering, Earthquake Engineering Research Institute, Oakland, CA.
Sezen, H., and Moehle, J. (2004). “Shear strength model for lightly reinforced concrete columns.” J. Struct. Eng., 1692–1703.
Stafford-Smith, B., and Carter, C. (1969). “A method for the analysis of infilled frames.” Proc. Inst. Civ. Eng., 44(1), 31–48.
Stavridis, A. (2009). “Analytical and experimental study of seismic performance of reinforced concrete frames infilled with masonry walls.” Ph.D. dissertation, Dept. of Structural Engineering, Univ. of California, San Diego.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Dec 29, 2012
Accepted: Jul 31, 2013
Published online: Aug 3, 2013
Published in print: Aug 1, 2014
Discussion open until: Sep 18, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.