Accounting for Earthquake-Induced Dam-Reservoir Interaction Using Modified Accelerograms
Publication: Journal of Structural Engineering
Volume 139, Issue 9
Abstract
This paper proposes a new practical and efficient procedure to investigate the seismic response of gravity dams that (1) avoids the finite or boundary element discretization of the impounded reservoir; (2) can be applied using standard finite-element software not necessarily including fluid-structure interaction capabilities; and (3) accounts for dam and foundation flexibility, water compressibility, and reservoir bottom wave absorption. The proposed technique consists of modifying the original input ground acceleration to obtain a new accelerogram that directly accounts for the complex effects of fluid-structure interaction. This new accelerogram can then be applied to a dam or dam-foundation system without the impounded reservoir. The exact and simplified formulations of the proposed method are developed, and its efficiency is validated through examples of dam-reservoir systems with different geometries. Very satisfactory agreement is obtained when comparing the results to more advanced finite-element solutions including fluid-structure interaction capabilities. The new procedure enhances the efficiency of seismic assessment of gravity dams by reducing the modeling and computational burden associated with reservoir discretization while keeping the main advantages of conventional solid finite-element software in conducting dynamic analyses and providing the resulting stresses, strains, force distributions, and other dam response indicators.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge the financial support of the Natural Sciences and Engineering Research Council of Canada (NSERC) and the Quebec Fund for Research on Nature and Technology (FQRNT).
References
ADINA version 8.8 [Computer software]. Watertown, MA, ADINA R & D, Inc.
Bayraktar, A., Hançer, E., and Akköse, M. (2005). “Influence of base-rock characteristics on the stochastic dynamic response of dam–reservoir–foundation systems.” Eng. Struct., 27(10), 1498–1508.
Bouaanani, N., and Lu, F. Y. (2009). “Assessment of potential-based fluid finite elements for seismic analysis of dam–reservoir systems.” J. Comput. Struct., 87(3–4), 206–224.
Bouaanani, N., and Miquel, B. (2010). “A new formulation and error analysis for vibrating dam-reservoir systems with upstream transmitting boundary conditions.” J. Sound Vibrat., 329(10), 1924–1953.
Bouaanani, N., and Perrault, C. (2010). “Practical formulas for frequency domain analysis of earthquake-induced dam-reservoir interaction.” J. Eng. Mech., 136(1), 107–119.
Chakrabarti, P., and Chopra, A. K. (1973). “Earthquake analysis of gravity dams including hydrodynamic interaction.” Earthquake Eng. Struct. Dynam., 2(2), 143–160.
Chopra, A. K. (1970). “Earthquake response of concrete gravity dams.” Rep. No. UCB/EERC-70/01, Univ. of California, Berkeley, CA.
Chopra, A. K. (1978). “Earthquake resistant design of concrete gravity dams.” J. Struct. Div., 104(6), 953–971.
Fenves, G., and Chopra, A. K. (1984a). “EAGD-84, a computer program for earthquake analysis of concrete gravity dams.” Rep. No. UCB/EERC-84/11, Univ. of California, Berkeley, CA.
Fenves, G., and Chopra, A. K. (1984b). “Earthquake analysis and response of concrete gravity dams.” Rep. No. UCB/EERC-84/10, Univ. of California, Berkeley, CA.
Fenves, G., and Chopra, A. K. (1987). “Simplified earthquake analysis of concrete gravity dams.” J. Struct. Eng., 113(8), 1688–1708.
Fok, K. L., Hall, J. F., and Chopra, A. K. (1986). “EACD-3D, a computer program for three-dimensional earthquake analysis of concrete dams.” Rep. No. UCB/EERC-86/09, Univ. of California, Berkeley, CA.
Hall, J. F., and Chopra, A. K. (1982). “Two-dimensional dynamic analysis of concrete gravity and embankment dams including hydrodynamic effects.” Earthquake Eng. Struct. Dynam., 10(2), 305–332.
Humar, J. L., and Jablonski, A. M. (1988). “Boundary element reservoir model for seismic analysis of gravity dams.” Earthquake Eng. Struct. Dynam., 16(8), 1129–1156.
Liu, P. H., and Cheng, A. (1984). “Boundary solutions for fluid-structure interaction.” J. Hydraul. Eng., 110(1), 51–64.
Maeso, O., Aznarez, J. J., and Dominguez, J. (2004). “Three-dimensional models of reservoir sediment and effects on the seismic response of arch dams.” Earthquake Eng. Struct. Dynam., 33(10), 1103–1123.
Maity, D. (2005). “A novel far-boundary condition for the finite element analysis of infinite reservoir.” Appl. Math. Comput., 170(2), 1314–1328.
Miquel, B., and Bouaanani, N. (2010). “Simplified evaluation of the vibration period and seismic response of gravity dam-water systems.” J. Eng. Struct., 32(8), 2488–2502.
Saini, S. S., Bettess, P., and Zienkiewicz, O. C. (1978). “Coupled hydrodynamic response of concrete gravity dams using finite and infinite elements.” Earthquake Eng. Struct. Dynam., 6(4), 363–374.
Sharan, S. K. (1985). “Finite element modelling of infinite reservoirs.” J. Eng. Mech., 111(12), 1457–1469.
Sommerfeld, A. (1949). Partial differential equations in physics, Academic Press, New York.
Tsai, C. S., and Lee, G. C. (1987). “Arch dam-fluid interactions: By FEM-BEM and substructure concept.” Int. J. Numer. Methods Eng., 24(12), 2367–2388.
Zienkiewicz, O. C., and Newton, R. E. (1969). “Coupled vibrations of a structure submerged in a compressible fluid.” Int. Symp. on Finite Element Techniques, Institut Fur Statik und Dynamik Der Luft- und Raumfahrtkonstruktionen, Univ. of Stuttgart, Stuttgart, Germany.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Jan 31, 2012
Accepted: Sep 6, 2012
Published online: Aug 15, 2013
Published in print: Sep 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.