Shear Capacity of Normal, Lightweight, and High-Strength Concrete Beams according to Model Code 2010. II: Experimental Results versus Nonlinear Finite Element Program Results
Publication: Journal of Structural Engineering
Volume 139, Issue 9
Abstract
Nonlinear finite element analysis (NLFEA) is a useful tool for the assessment and design of structures if the reliability of the prediction is known in advance. Therefore, it makes sense to tailor finite element programs to specific types of structural members by calibrating them against test results obtained on similar types of specimens. By increasing the accuracy of prediction for such specified types of structural members, assessment and design are possible with higher reliability than can be obtained with analytical models. This strategy is illustrated for the case of shear-reinforced flanged beams using the constitutive model PARC_CL implemented into ABAQUS code. A comparison with analytical models shows the power of tailored FEM calculations in combination with reliability considerations.
Get full access to this article
View all available purchase options and get full access to this article.
References
Belletti, B., Cerioni, R., and Iori, I. (2001). “Physical approach for reinforced-concrete (PARC) membrane elements.” J. Struct. Eng., 127(12), 1412–1426.
Belletti, B., Cerioni, R., Meda, A., and Plizzari, G. (2008). “Design aspects on steel fiber-reinforced concrete pavements.” J. Mater. Civ. Eng., 20(9), 599–607.
Belletti, B., and Esposito, R. (2010). “Un modello costitutivo per elementi in C.A. soggetti ad azioni cicliche.” Proc., 18th C.T.E. Conf., Brescia, Italy, 81–91 (in Italian).
Comité Euro-International du Béton and Fédération Internationale de la Précontrainte (CEB-FIP). (1993). CEB-FIP Model Code 1990 (MC90), Bulletins d'Informations 203 and 205, Thomas Telford, London.
Comité Euro-International du Béton and Fédération Internationale de la Précontrainte (CEB-FIP). (1995). Model uncertainties, Bulletins d'Informations 224, Thomas Telford, London.
CUR. (1995). “Structural behaviour of concrete with coarse lightweight aggregates.” Research Committee C75, Report 175, Centre of Civil Engineering Research and Codes (CUR), Gouda, Netherlands.
di Prisco, M., Dozio, D., and Belletti, B. (2013). “On the fracture behaviour of thin-walled SFRC roof elements.” Mater. Struct., 46(5), 803–829.
Fédération International du Béton (fib). (2012). Model Code 2010, final completed draft, Bulletins d'Informations 65 and 66, International Federation for Structural Concrete (fib), Lausanne, Switzerland.
Feenstra, P. H. (1993). “Computational aspects of biaxial stress in plain and reinforced concrete.” Ph.D. thesis, Delft Univ. of Technology, Delft, Netherlands.
Gambarova, P. G. (1983). “Sulla trasmissione del taglio in elementi bidimensionali piani di c.a. fessurati.” Proc., Giornate AICAP, 141–156, Bari, Italy (in Italian).
Leonhardt, F., and Schelling, G. (1974). Torsionsversuche an Stahlbetonbalken, Deutscher Ausschuss für Stahlbeton, Vol. 239, Ernst & Sohn, Berlin (in German).
Nakamura, H., and Higai, T. (2001). “Compressive fracture energy and fracture zone length of concrete.” Modeling of inelastic behavior of RC structures under seismic loads, P. Benson Shing and T. Tanabe, eds., ASCE, Reston, VA, 471–487.
Vecchio, F. J., and Collins, M. P. (1993). “Compression response of cracked reinforced concrete.” J. Struct. Eng., 119(12), 3590–3610.
Walraven, J., Belletti, B., and Esposito, R. (2013).“Shear capacity of normal, lightweight, and high-strength concrete beams according to Model Code 2010. I: Experimental results versus analytical model results.” J. Struct. Eng., 139(9), 1593–1599.
Walraven, J. C., and Reinhardt, H. W. (1981). “Theory and experiments on the mechanical behaviour of cracks in plain and reinforced concrete subjected to shear loading.” Heron, 26(1A), 1–68.
Walraven, J., and Stroband, J. (1994). “Shear fraction in high-strength concrete.” Proc., ACI Int. Conf. on High Performance Concrete, ACI SP, 149(17), 311–330, Singapore.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Apr 21, 2012
Accepted: Sep 13, 2012
Published online: Sep 18, 2012
Published in print: Sep 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.