Simple Beam Model to Estimate Leakage in Longitudinally Cracked Pressurized Pipes
Publication: Journal of Structural Engineering
Volume 138, Issue 8
Abstract
Losses from water distribution systems are reaching alarming levels in many cities throughout the world. Leakage is often the principal cause of water loss because of aging and deterioration of these systems, and pressure has been verified to assume a key-role in water-loss management. This paper presents a simple analytical model based on a beam with elastic constraints to estimate the leak area (from which the leakage is then estimated) in longitudinally cracked pressurized pipes and to evaluate the effect of pressure on the opening area of the crack. The model is calibrated on the results of a three-dimensional finite-element analysis and then validated by experimental results. The validation has been carried out for a wide range of pipes made of different materials (PVC, cast iron, asbestos-cement, and steel) with radii ranging from 27.5 to 110 mm, thicknesses from 1.5 to 12 mm, and crack lengths from 50 to 200 mm. The beam model, notwithstanding its simplicity, provides reliable leakage evaluations in longitudinally cracked pressurized pipes.
Get full access to this article
View all available purchase options and get full access to this article.
References
Brémond, B., Fabrie, P., Jaumouillé, E., Mortazavi, I., and Piller, O. (2009). “Numerical simulation of the hydraulic Saint-Venant type model with pressure-dependent leakage.” Appl. Math. Lett., 22(11), 1694–1699.AMLEEL
Buckley, R. S. (2007). “Theoretical investigation and experimentation into the expansion of round holes and cracks within pressurized pipes.” Master’s thesis, Dept. of Civil Engineering, Univ. of Johannesburg, Johannesburg, South Africa.
Cassa, A. M., Van Zyl, J. E., and Laubscher, R. F. (2006). “A numerical investigation into the behaviour of leak openings in uPVC pipes under pressure.” Proc. of WISA2006, Water Institute of Southern Africa Biennial Conf., Durban, South Africa.
Cassa, A. M., Van Zyl, J. E., and Laubscher, R. F. (2010). “A numerical investigation into the effect of pressure on holes and cracks in water supply pipes.” Urban Water J., 7(2), 109–120.UWJRAU
Chadwick, A., and Morfett, J. (1998). Hydraulics in civil and environmental engineering, 3rd Ed., E&FN Spon, London.
Clayton, C. R. I., and Van Zyl, J. E. (2005). “The effect of pressure on leakage in water distribution systems.” Proc. of CCWI2005, Int. Conf. Computing and Control in the Water Industry: Water Management for the 21st Century, Savic, D. A., Walters, G. A., Khu, S. T. and King, R., eds., Centre for Water Systems, Univ. of Exeter, Exeter, UK, Vol. 2, 131–136.
Clayton, C. R. I., and Van Zyl, J. E. (2007). “The effect of pressure on leakage in water distribution systems.” Proc. of the ICE, Water Management, Vol. 160(2), 109–114.
Copley, L. G., and Sanders, J. L. (1969). “A longitudinal crack in a cylindrical shell under internal pressure.” Int. J. Fract., 5(2), 117–131.IJFRAP
Erdogan, F. (1977). “Crack problems in cylindrical and spherical shells.” Plates and shells with cracks, Sih, G., ed., Noordhoff, Leyden, Netherlands, 161–199.
Farley, M. (2001). Leakage management and control: A best practice training manual, World Health Organization, Geneva.
Folias, E. S. (1967). “On axial crack in a pressurized cylindrical shell.” Int. J. Fract., 3, 1–11.IJFRAP
Greyvenstein, B. (2004). “An experimental investigation into the pressure-leakage relationship of some failed water pipes in Johannesburg.” Eng. Final Year Project Report, Dept. of Civil and Urban Engineering, Rand Afrikaans Univ. (now Univ. of Johannesburg), Johannesburg, South Africa.
Greyvenstein, B. (2007). “An experimental investigation into the pressure-leakage relationship of fractured water pipes in Johannesburg.” Master’s thesis, Dept. of Civil Engineering, Univ. of Johannesburg, Johannesburg, South Africa.
Heck, A. (2003). Introduction to maple, 3rd Ed., Springer-Verlag, New York.
Hetenyi, M. (1946). Beams on elastic foundation, University of Michigan Press, Ann Arbor, MI.
Huh, N. S., Shim, D. J., Choi, S., Wilkowski, G. M., and Yang, J. S. (2008). “Stress intensity factors for slanted through-wall cracks based on elastic finite element analyses.” Fatigue Fract. Eng. Mater. Struct.FFESEY, 31(2), 197–209.
Ilunga, D. T., Van Zyl, J. E., and Dundu, M. (2008). “The effect of the pipe material in the behaviour of longitudinal cracks under pressure.” Proc. of WDSA2008, 10th Annual Water Distribution Systems Analysis Conf., Van Zyl, J. E., Ilemobade, A. A. and Jacobs, H. E., eds., ASCE, Reston, VA, 777–781.
Rahman, S., Brust, F. W., Ghadiali, N., and Wilkowski, G. M. (1998). “Crack-opening-area analyses for circumferential through-wall cracks in pipews- part I: Analytical models.” Int. J. Pressure Vessels PipingPRVPAS, 75(5), 357–373.
Sechler, E. E., and Williams, M. L. (1959). The critical crack length in pressurized, monocoque cylinders, Final Rep. on Contract NAW-6525, California Institute of Technology, Pasadena, CA.
STRAUS7. (2004). “Theoretical manual theoretical background to the Straus7 finite element analysis system.” 1st Ed., Strand7 Pty Ltd., Sydney, Australia.
Takahashi, Y. (2002). “Evaluation of leak-before-break assessment methodology for pipes with a circumferential through-wall crack. Part I: Stress intensity factor and limit load solutions.” Int. J. Pressure Vessels PipingPRVPAS, 79(6), 385–392.
Thornton, J., and Lambert, A. (2005). “Progress in practical prediction of pressure: Leakage, pressure: Burst frequency and pressure: Consumption relationships.” Proc. of IWA Special Conf. “Leakage 2005”, Halifax, Canada.
Vermersch, M., and Rizzo, A. (2008). “Designing an action plan to control non-revenue water.” Water 21, Magazine of the IWA, 10.2, 39–41.
Wilkowski, G. (2000). “Leak-before-break: What does it really mean?” J. Pressure Vessel Technol., 122(3), 267–272.JPVTAS
Wuthrich, C. (1983). “Crack opening areas in pressure vessels and pipes.” Eng. Fract. Mech., 18(5), 1049–1057.EFMEAH
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 138 • Issue 8 • August 2012
Pages: 1065 - 1074
Copyright
© 2012. American Society of Civil Engineers.
History
Received: Jan 28, 2011
Accepted: Nov 4, 2011
Published online: Nov 8, 2011
Published in print: Aug 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.