Pounding in Base-Isolated Buildings Subjected to Underground Blasting
Publication: Practice Periodical on Structural Design and Construction
Volume 27, Issue 2
Abstract
The increase in the world population has led to a decrease in available resources across the globe. One such important resource is land to construct civil engineering structures. The unavailability of land resources has led to the fact that people are building structures adjacent to each other and neglecting standard guidelines for minimum separation distance between structures. This results in mutual pounding between closely spaced structures in the event of an earthquake or strong ground motions generated due to an accidental underground blast or mining activities. The present study analyzes the pounding characteristics of buildings subjected to underground blast–induced ground vibrations. Two adjacent single-degree-of-freedom (SDOF) systems are modeled as linear shear-type buildings in SAP2000, with different structural properties. The influence of friction base sliding isolations is also analyzed to prevent the pounding phenomenon. The influence of various factors—natural time period, separation gaps, charge mass, and friction coefficient—are also considered to study the pounding phenomenon. It is found that these parameters have a significant effect on structural responses and pounding characteristics.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
The authors have not received any funding for this study.
References
Agarwal, P., S. K. Thakkar, and R. N. Dubey. 2012. “Behavior of building, bridges, dams and ports during Bhuj earthquake of January 26-2001.” In Proc., ISET Golden Jubilee Symp. Uttarakhand, India: Indian Society of Earthquake Technology.
Agarwal, V. K. 2005. Pounding and impact of base isolated buildings due to earthquakes. Austin, TX: Texas A&M Univ.
Ali, R. M., and L. A. Louca. 2008. “Performance-based design of blast resistant offshore topsides, Part II: Modelling and design.” J. Constr. Steel Res. 64 (9): 1046–1058. https://doi.org/10.1016/j.jcsr.2008.02.002.
Anagnostopoulos, S. A. 1988. “Pounding of buildings in series during earthquakes.” Earthquake Eng. Struct. Dyn. 16 (3): 443–456. https://doi.org/10.1002/eqe.4290160311.
Ataei, M. 2010. “Evaluation of blast-induced ground vibrations from underground excavation at Karoun 3 area.” Min. Technol. 119 (1): 7–13. https://doi.org/10.1179/037178409X12596677450081.
Bakre, S. V., R. S. Jangid, and G. R. Reddy. 2007. “Response of piping system on friction support to bi-directional excitation.” Nucl. Eng. Des. 237 (2): 124–136. https://doi.org/10.1016/j.nucengdes.2005.12.012.
BIS (Bureau of Indian Standards). 2016. Criteria for earthquake resistant design of structures. New Delhi, India: BIS.
Carvalho, E. M. L., and R. C. Battista. 2003. “Blast-induced vibrations in urban residential buildings.” Proc. Inst. Civ. Eng. Struct. Build. 156 (3): 243–253. https://doi.org/10.1680/stbu.2003.156.3.243.
CEN (European Committee for Standardization). 2005. Design of structures for earthquake resistance—Part 1: General rules, seismic actions and rules for buildings. Eurocode 8. Brussels, Beligium: CEN.
Chopra, A. K. 2007. Dynamics of structures. London: Pearson Education India.
Constantinou, M., A. Mokha, and A. Reinhorn. 1990. “Teflon bearings in base isolation II: Modeling.” J. Struct. Eng. 116 (2): 455–474. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:2(455).
Erten, O., G. Konak, M. S. Kizil, A. H. Onur, and D. Karakus. 2009. “Analysis of quarry-blast-induced ground vibrations to mitigate their adverse effects on nearby structures.” Int. J. Min. Mineral Eng. 1 (4): 313–326. https://doi.org/10.1504/IJMME.2009.029317.
Gokhale, V. A., and D. Joshi. 2012. “Vulnerability assessment of building stock at historic city of Pune, India with reference to pounding hazard.” In Proc., 15th World Conf in Earthquake Engineering. Lisbon.
Hinman, E. E. 1989. “Shock response of buried structures subject blast.” In Proc., ASCE Special Conf. on Structures for Enhanced Safety and Physical Security, 191–202. Reston, VA: ASCE.
Jangid, R. S. 2000. “Optimal frictional elements in sliding isolation system.” Comput. Struct. 76 (3): 651–661. https://doi.org/10.1016/S0045-7949(99)00126-1.
Jangid, R. S. 2005. “Optimum friction pendulum system for near-fault motions.” Eng. Struct. 27 (3): 349–359. https://doi.org/10.1016/j.engstruct.2004.09.013.
Jangid, R. S. 2007. “Optimum lead–rubber isolation bearings for near-fault motions.” Eng. Struct. 29 (10): 2503–2513. https://doi.org/10.1016/j.engstruct.2006.12.010.
Kangda, M. Z., and S. V. Bakre. 2017. “The effect of LRB parameters on structural responses for blast and seismic loads.” Arabian J. Sci. Eng. 43 (4): 1761–1776. https://doi.org/10.1007/s13369-017-2732-7.
Kumar, R., D. Choudhury, and K. Bhargava. 2016. “Determination of blast-induced ground vibration equations for rocks using mechanical and geological properties.” J. Rock Mech. Geotech. Eng. 8 (3): 341–349. https://doi.org/10.1016/j.jrmge.2015.10.009.
Mahmoud, S. 2017. “Dynamic response of adjacent buildings under explosive loads.” Arab. J. Sci. Eng. 41 (10): 4007–4018. https://doi.org/10.1007/s13369-016-2086-6.
Mahmoud, S. 2019. “Blast-load-induced interaction between adjacent multi-story buildings.” Earthquakes Struct. 17 (1): 17–29. https://doi.org/10.12989/eas.2019.17.1.017.
Maison, B. F., and K. Kasai. 1992. “Dynamics of pounding when two buildings collide.” Earthquake Eng. Struct. Dyn. 21 (9): 771–786. https://doi.org/10.1002/eqe.4290210903.
Mate, N. U., S. V. Bakre, and O. R. Jaiswal. 2014. “Seismic pounding of adjacent linear elastic buildings with various contact mechanisms for impact simulation.” Asian J. Civ. Eng. 16 (3): 383–415.
Mate, N. U., S. V. Bakre, and O. R. Jaiswal. 2017. “Seismic pounding response of singled-degree-of-freedom elastic and inelastic structures using passive tuned mass damper.” Int. J. Civ. Eng. 15 (7): 991–1005. https://doi.org/10.1007/s40999-017-0178-7.
Matsagar, V. A., and R. S. Jangid. 2003. “Seismic response of base-isolated structures during impact with adjacent structures.” Eng. Struct. 25 (10): 1311–1323. https://doi.org/10.1016/S0141-0296(03)00081-6.
Miari, M., K. K. Choong, and R. Jankowski. 2019. “Seismic pounding between adjacent buildings: Identification of parameters, soil interaction issues and mitigation measures.” Soil Dyn. Earthquake Eng. 121 (Jun): 135–150. https://doi.org/10.1016/j.soildyn.2019.02.024.
Mokha, A., M. Constantinou, and A. Reinhorn. 1990. “Teflon bearings in base isolation I: Testing.” J. Struct. Eng. 116 (2): 438–454. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:2(438).
Mondal, P. D., A. D. Ghosh, and S. Chakraborty. 2016. “Performance of various base isolation systems in mitigation of structural vibrations due to underground blast-induced ground motion.” Int. J. Struct. Stab. Dyn. 17 (4): 1750043. https://doi.org/10.1142/S0219455417500432.
Raheem, S. E. A. 2009. “Pounding mitigation and unseating prevention at expansion joints of isolated multi-span bridges.” Eng. Struct. 31 (10): 2345–2356. https://doi.org/10.1016/j.engstruct.2009.05.010.
Rigas, F., and S. Ioannis. 1999. “Amplification effects of soil stratification on ground stress waves.” J. Geotech. Geoenviron. Eng. 125 (7): 611–614. https://doi.org/10.1061/(ASCE)1090-0241(1999)125:7(611).
UBC (Uniform Building Code). 1997. “Uniform Building Code.” In Proc., Int. Conf. of Building Officials. Whittier, CA: South Workman Mill Road.
Wu, C., and H. Hao. 2005. “Numerical study of characteristics of underground blast-induced surface ground motion and their effect on above-ground structures. Part I—Ground motion characteristics.” Soil Dyn. Earthquake Eng. 25 (1): 27–38. https://doi.org/10.1016/j.soildyn.2004.08.001.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Aug 31, 2021
Accepted: Jan 4, 2022
Published online: Feb 22, 2022
Published in print: May 1, 2022
Discussion open until: Jul 22, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.