Deflection of Reinforced Concrete Beams with Longitudinal Circular Hole
Publication: Practice Periodical on Structural Design and Construction
Volume 23, Issue 1
Abstract
The main aim of this investigation was to study the behavior of simply supported rectangular RC beams with longitudinal circular hole subjected to gradually increased and symmetrically applied two-point loads. Each hollow beam had a 25-, 40-, or 50-mm diameter hole, and the position of center of hole also varied from 45 to 180 mm from the top. The cross section of the beam, the amount of longitudinal steel, and the transverse steel of the beam were kept constant. The same M20 grade of concrete was adopted for all of the beams. Theoretical equations were developed or existing equations were modified by taking into account the area and position of holes to determine the maximum deflection at precracking and postcracking stages of the RC hollow beams. To examine the validity of the developed theoretical equations, a total of 76 RC hollow beams and 10 RC solid beams were cast and tested up to failure. Also, the behavior of these hollow beams was compared with RC solid beams having the same outer dimensions and reinforcements. The behavior of all of these beams was studied by measuring deflections and observing crack patterns. The comparison shows that the developed theoretical model satisfactorily predicts the maximum deflection at pre- and postcracking stages of RC hollow beams.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The test program of this paper was carried out at the Concrete and Structural Engineering Research Laboratory, Department of Civil Engineering, Bannari Amman Institute of Technology, Sathyamangalam, India. The authors thank all staff members of the Civil Engineering Department and technicians of the laboratory for their helpful assistance in the preparation and testing of beams.
References
ACI Committee 318-11. (2011). Building code requirements for structural concrete and commentary (ACI 318-11),American Concrete Institute,Farmington Hills, MI.
ACI Committee 318M-08. (2008). Building code requirements for structural concrete (ACI 318M-08) and commentary,American Concrete Institute,Farmington Hills, MI.
Arun, M. (2015). “Behavior and strength of reinforced concrete hollow beams.” Ph.D. thesis,Anna Univ., Bannari Amman Institute of Technology,Sathyamangalam, Tamilnadu, India.
Bischoff, P. H. (2005). “Reevaluation of deflection prediction for concrete beams reinforced with steel and fiber reinforced polymer bars.” J. Struct. Eng., 752–767.
Bischoff, P. H. (2007). “Deflection calculation of FRP reinforced concrete beams based on modifications to the existing Branson equation.” J. Compos. Constr., 4–14.
Branson, D. E. (1965). “Instantaneous and time-dependent deflections of simple and continuous reinforced concrete beams.” HPR Rep. No.7, Part 1,Alabama Highway Dept., Bureau of Public Roads,Montgomery, AL.
Branson, D. E. (1977). Deformation of concrete structures,McGraw–Hill,New York.
CSA (Canadian Standards Association). (2004). “Design of concrete structures.” CSA Standard A23.3-04,Rexdale, Toronto, Ontario, Canada.
Ilker, K. (2010). “Deflection prediction for reinforced concrete beams through different effective moment of inertia expressions.” Int. J. Eng. Res. Dev.,2(1), 72–80.
Mansur, M. A., and Tan, K. H. (1999). Beams with openings: Analysis and design,CRC Press,Boca Raton, FL.
Menon, D., and Pillai, S. U. (2009). Reinforced concrete design,Tata McGraw–Hill,New Delhi, India.
Murugesan, A., and Narayanan, A. (2017). “Influence of a longitudinal circular hole on flexural strength of reinforced concrete beams.” Pract. Period. Struct. Des. Constr., 04016021.
Information & Authors
Information
Published In
Copyright
© 2017 American Society of Civil Engineers.
History
Received: Apr 10, 2017
Accepted: Sep 6, 2017
Published online: Dec 13, 2017
Published in print: Feb 1, 2018
Discussion open until: May 13, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.