Structural Performance of Oil and Gas Pipe with Dent Defect
Publication: Journal of Pipeline Systems Engineering and Practice
Volume 9, Issue 1
Abstract
Energy-transmission buried pipelines are often susceptible to externally applied concentrated loads that may cause dent defects. A dent or dent defect can be best described as a local defect in the pipe’s wall causing concentration of strains surrounding and within the dent. Additionally, a dent causes the pipe’s diameter to decrease, as well as the reduction in the line’s pressure capacity. Concentration of strains that occur as a consequence of the dent’s formation may lead to a failure such as a leak or a rupture within the pipe’s wall, and this may cause environmental and safety hazards and a loss of revenue for the pipeline operators. Therefore, dent defects are a significant concern for the oil and gas pipeline operators. This paper presents an investigation of the effect of dent length, depth of dent, and operating pressure on the structural performance, distribution of strains, and strain concentrations in oil and gas (energy) transmission pipelines.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors thank the Natural Sciences and Engineering Research Council of Canada (NSERC) located Ottawa. Sincere thanks are given to other members of the Centre for Engineering Research in Pipelines (CERP) for their help.
References
Abaqus/Standard version 6.14 [Computer software]. Dassault Systèmes, Waltham, MA.
Akbari Alashti, R., Jafari, S., and Hosseinipour, S. J. (2016). “Experimental and numerical investigation of ductile damage effect on load bearing capacity of a dented API XB pipe subjected to internal pressure.” Eng. Fail. Anal., 47, 208–228.
API (American Petroleum Institute). (2012). “Specification for line pipe.” Specification 5L, Washington, DC.
ASME. (2012). “Pipeline transportation systems for liquids and slurries.” ASME B31.4, New York.
ASTM. (2011). “Standard test methods for tension testing of metallic materials.” ASTM E8/E8M-16a, West Conshohocken, PA.
Baker, M. (2004). “Integrity management program–dent study.”, Dept. of Transportation, Coraopolis, PA.
Cosham, A., and Hopkins, P. (2004). “The effect of dents in pipelines-guidance in the pipeline defect assessment manual.” Int. J. Press. Vessels Pip., 81(2), 127–139.
CSA (Canadian Standards Association). (2015). “Oil and gas pipeline systems.” CSA Z662-15, Mississauga, Canada.
Gao, M., McNealy, R., Krishnamurthy, R., and Colquhoun, I. (2008). “Strain-based models for dent assessment: A review.” Proc., 2008 7th Int. Pipeline Conf., ASME, New York, 823–830.
Ghaednia, H., Das, S., Wang, R., and Kania, R. (2015a). “Effect of operating pressure and dent depth on burst strength of NPS30 linepipe with dent-crack defect.” J. Offshore Mech. Arct. Eng., 137(3), 031402.
Ghaednia, H., Das, S., Wang, R., and Kania, R. (2015b). “Safe burst strength of a pipeline with dent-crack defect: Effect of crack depth and operating pressure.” Eng. Fail. Anal., 55, 288–299.
Gresnigt, A. M., Karamanos, S. A., and Andreadakis, K. P. (2007). “Lateral loading of internally pressurized steel pipes.” J. Pressure Vessel Technol., 129(4), 630–638.
Lancaster, E. R. (1996). “Burst pressures of pipes containing dents and gouges.” J. Process Mech. Eng., 210(1), 19–27.
Smith, R. B., and Gideon, D. N. (1979). “Statistical analysis of DOT-OPSO data.” Proc., Annual Symp., Society of Flight Test Engineers, Lancaster, CA, D.1–D.9.
Wang, K. C., and Smith, E. D. (1982). The effect of mechanical damage on fracture initiation in line pipe. Part I: Dents, energy, Mines and Resources Canada, Ottawa.
Zarea, M. F., Toumbas, D. N., Philibert, C. E., and Deo, I. (1996). “Numerical models for static denting and dynamic puncture of gas transmission linepipe and their validation.” 1st Int. Pipeline Conf., ASME, New York, 777–784.
Zhang, J., Liang, Z., Feng, D., Zhang, C., Xia, C., and Tu, Y. (2016). “Response of the buried steel pipeline caused by perilous rock impact: Parametric study.” J. Loss Prev. Process Ind., 43(1), 385–396.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Oct 6, 2016
Accepted: Jul 13, 2017
Published online: Nov 22, 2017
Published in print: Feb 1, 2018
Discussion open until: Apr 22, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.