True Stress–Strain Curves Test and Material Property Analysis of API X65 and API X90 Gas Pipeline Steels
Publication: Journal of Pipeline Systems Engineering and Practice
Volume 9, Issue 1
Abstract
In this paper, true stress–strain curves of two natural gas pipeline steels, API-5L X65 and X90, were studied using the three-dimensional digital image correlation (3D-DIC) technique. During the test, the steels were continuously strained hardening up to the fracture, and true stress–strain curves were obtained. It was found that the true stress increases with strain after necking, which is notably different from the results obtained by the conventional method. Using the FEM model, the true stress–strain curves were validated. Based on the material’s inherent properties, the material property analysis was implemented. The moduli of elasticity in the elastic region obtained by the proposed method and conventional methods were nearly equal. It was also found that the strain-hardening capacities of gas pipeline steels could be better characterized by the hardening exponent than yield-tensile ratio. Besides, the strain-energy density analysis based on the true stress–strain curve demonstrated that before the onset of necking, only 7.3% of the strain energy density of API-5L X90 was used.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully acknowledge the sponsorships of this work by the Young scholars development fund of SWPU (Grant No. 201699010002), Innovation Fund of China National Petroleum Corporation (Grant No. 2016D-5007-0602), “13th Five-Year” National Key Project (Grant No. 2016YFC0802100), and Consulting Research Project of Chinese Academy of Engineering (Grant No. 2015-XZ-37).
References
ABAQUS [Computer software]. Dassault Systèmes, Providence, RI.
Anderson, T. L. (2005). Fracture mechanics: Fundaments and applications, 3rd Ed., CRC Press, Boca Raton, FL.
API Specification 5L. (2012). Specification for line pipe, 45th Ed., API, Washington, DC.
ASTM. (2004). “Standard test methods for tension testing of metallic materials.” ASTM E8M, West Conshohocken, PA.
Berg, E., Østby, E., Thaulow, C., and Skallerud, B. (2008). “Ultimate fracture capacity of pressurised pipes with defects—Comparisons of large scale testing and numerical simulations.” Eng. Mech. Fract., 75(8), 2352–2366.
Bridgman, P. W. (1952). Studies in large plastic flow and fracture, McGraw-Hill, New York.
Dowling, N. E. (1999). Mechanical behavior of materials: Engineering methods for deformation, fracture and fatigue, 2nd Ed., Prentice Hall, Upper Saddle River, NJ.
Duan, L., Chen, Y., Liu, Q., Jia, S., and Jia, C. (2014). “Microstructures and mechanical properties of X100 pipeline steel strip.” J. Iron Steel Res., 21(2), 227–232.
GB (GuoBiao). (2002). “Metallic materials—Tensile testing at ambient temperature.” GB/T 228-2002, China Planning Press, Beijing.
Grytten, F., Daiyan, H., Polanco-Loria, M., and Dumoulin, S. (2009). “Use of digital image correlation to measure large-strain tensile properties of ductile thermoplastics.” Polym. Test., 28(6), 653–660.
ISO. (2009). “Metallic materials—Tensile testing. 1: Method of test at room temperature.” ISO 6892-1-2009, Geneva.
Jerabek, M., Major, Z., and Lang, R. W. (2010). “Strain determination of polymeric materials using digital image correlation.” Polym. Test., 29(3), 407–416.
Kalus, J., and Jørgensen, J. K. (2014). “Measuring deformation and mechanical properties of weld lines in short fibre reinforced thermoplastics using digital image correlation.” Polym. Test., 36, 44–53.
Kong, L., Shuai, J., Zhou, X., Chao, Y., and Han, K. (2016). “A universal method for acquiring the constitutive behaviors of API -5 L X90 welds.” Exp. Mech., 56(2), 165–176.
Leitão, C., Galvão, I., and Leal, R. M., and Rodrigues, D. M. (2012). “Determination of local constitutive properties of aluminium friction stir welds using digital image correlation.” Mater. Des., 33, 69–74.
Le Roy, G., Embury, J. D., Edwards, G., and Ashby, M. F. (1981). “A model of ductile fracture based on the nucleation and growth of voids.” Acta Metall., 29(8), 1509–1522.
MATLAB version 7.0 [Computer software]. MathWorks, Natick, MA.
Østby, E., Thaulow, C., and Nyhusa, B. (2007). “A new approach to ductile tearing assessment of pipelines under large-scale yielding.” Int. J. Pres. Ves. Pip., 84(6), 337–348.
Paredes, M., and Ruggieri, C. (2015). “Engineering approach for circumferential flaws in girth weld pipes subjected to bending load.” Int. J. Pres. Ves. Pip., 125(3), 49–65.
Parsons, E. M., Boyce, M. C., and Parks, D. M. (2004). “An experimental investigation of the large-strain tensile behavior of neat and rubber-toughened polycarbonate.” Polymer, 45(8), 2665–2684.
Parsons, E. M., Boyce, M. C., Parks, D. M., and Weinberg, M. (2005). “Three-dimensional large-strain tensile deformation of neat and calcium carbonate-filled high-density polyethylene.” Polymer, 46(7), 2257–2265.
Poulain, X., Kohlman, L. W., Binienda, W., Roberts, G. D., Goldberg, R. K., and Benzerga, A. A. (2013). “Determination of polymers using digital image correlation combined with video-monitored testing.” Int. J Solids Struct., 50(11–12), 1869–1878.
Ragab, A. R. (2004). “A model for ductile fracture based on internal necking of spheroidal voids.” Acta Mater., 52(13), 3997–4009.
Sarzosa, D. F. B., Souza, R. F., and Ruggieri, C. (2015). “J–CTOD relations in clamped SE(T) fracture specimens including 3-D stationary and growth analysis.” Eng. Fract. Mech., 147(11), 331–354.
TestWare [Computer software]. MTS Systems Corporation, Eden Prairie, MN.
Wang, W., Shan, Y., and Yang, K. (2009). “Study of high strength pipeline steels with different microstructures.” Mater. Sci. Eng. A, 502(1–2), 38–44.
Zhang, Z. L., Hauge, M., Odegard, J., and Thaulow, C. (1999). “Determining material true stress–strain curve from tensile specimens with rectangular cross-section.” Int. J. Solids Struct., 36(23), 3497–3516.
Zhang, Z. L., Hauge, M., Thaulow, C., and Ødegard, J. (2002). “A notched cross weld tensile testing method for determining true stress–strain curves for weldments.” Eng. Mech. Fract., 69(3), 353–366.
Zhao, W., Wang, W., Chen, S., and Qu, J. (2011). “Effect of simulated welding thermal cycle on microstructure and mechanical properties of X90 pipeline steel.” Mater. Sci. Eng. A, 528(24), 7417–7422.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Sep 23, 2015
Accepted: Jul 13, 2017
Published online: Nov 17, 2017
Published in print: Feb 1, 2018
Discussion open until: Apr 17, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.