Influence of Organic Emulsion on the Structure and Properties of Geopolymer
Publication: Journal of Materials in Civil Engineering
Volume 35, Issue 2
Abstract
Styrene-acrylic organic emulsion was synthesized, prepared, modified by silane coupling agents, and added to metakaolin-based geopolymer. Combining mechanical properties, x-ray diffraction, Fourier transform infrared spectroscopy, thermogravimetric analysis, and energy-dispersive x-ray spectroscopy/scanning electron microscopy (SEM-EDS), the effect of organic emulsion on the properties of geopolymer was analyzed. Results show that the flexural strength of the organic-inorganic hybrid geopolymer formed after adding the modified emulsion was significantly improved. Adding an appropriate amount of organically modified emulsion can improve the mechanical properties of geopolymer cured for 3 days. When adding 0.5 wt% modified emulsion (A-151), the 28-day flexural strength of the hybrid geopolymer reached its maximum value, which was 25.81% higher than that of pure metakaolin-based geopolymer. After the emulsion was added, the compressive strength of geopolymer samples decreased slightly, which may be related to the increased moisture brought by the emulsion and the viscosity of the emulsion. The increased flexural-to-compressive-strength ratio of samples indicate that the toughness of the geopolymer was improved. It was found using SEM-EDS that the organic phase has good compatibility with the inorganic matrix, and the organic phase participates in the polymerization of geopolymer.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request. This includes all experimental data including data shown in Figs. 3–8.
Acknowledgments
This work was financially supported by the National Natural Science Foundation of China (Nos. 51672236, 51502259, and 51572234).
References
Aronne, A., E. Serena, F. Claudio, P. Michele, and P. Pasquale. 2002. “FTIR study of the thermal transformation of barium-exchanged zeolite A to celsian.” J. Mater. Chem. 12 (10): 3039–3045. https://doi.org/10.1039/b203859e.
Bosoaga, A., O. Masek, and J. Oakey. 2009. “CO2 capture technologies for cement industry.” Energy Proc. 1 (1): 133–140. https://doi.org/10.1016/j.egypro.2009.01.020.
Catauro, M., F. Papale, and G. Lamanna. 2015. “Geopolymer/PEG hybrid materials synthesis and investigation of the polymer influence on microstructure and mechanical behavior.” Mater. Res. 18 (4): 698–705. https://doi.org/10.1590/1516-1439.342814.
Chen, B., H. Shao, B. Li, and Z. Li. 2020. “Influence of silane on hydration characteristics and mechanical properties of cement paste.” Cem. Concr. Compos. 113 (Oct): 103743. https://doi.org/10.1016/j.cemconcomp.2020.103743.
Colangelo, F., G. Roviello, L. Ricciotti, C. Ferone, and R. Cioffi. 2013. “Preparation and characterization of new geopolymer-epoxy resin hybrid mortars.” Materials 6 (7): 2989–3006. https://doi.org/10.3390/ma6072989.
Ding, Y., Y. Zhang, and A. Thomas. 2009. “The investigation on strength and flexural toughness of fiber cocktail reinforced self-compacting high-performance concrete.” Constr. Build. Mater. 23 (1): 448–452. https://doi.org/10.1016/j.conbuildmat.2007.11.006.
Duxson, P., J. L. Provis, G. C. Lukey, and J. S. Van Deventer. 2007. “The role of inorganic polymer technology in the development of green concrete.” Cem. Concr. Res. 37 (12): 1590–1597. https://doi.org/10.1016/j.cemconres.2007.08.018.
Ferone, C., G. Roviello, F. Colangelo, R. Cioffi, and O. Tarallo. 2013. “Novel hybrid organic-geopolymer materials.” Appl. Clay Sci. 73 (Mar): 42–50. https://doi.org/10.1016/j.clay.2012.11.001.
Fu, S., P. He, M. Wang, J. Cui, M. Wang, X. Duan, Z. Yang, D. Jia, and Y. Zhou. 2020. “Hydrothermal synthesis of pollucite from metakaolin-based geopolymer for hazardous wastes storage.” J. Cleaner Prod. 248 (Mar): 119240. https://doi.org/10.1016/j.jclepro.2019.119240.
Gartner, E. 2004. “Industrially interesting approaches to ‘low-CO2’ cements.” Cem. Concr. Res. 34 (9): 1489–1498. https://doi.org/10.1016/j.cemconres.2004.01.021.
Guo, X., and G. Xiong. 2021. “Resistance of fiber-reinforced fly ash-steel slag based geopolymer mortar to sulfate attack and drying-wetting cycles.” Constr. Build. Mater. 269 (Feb): 121326–121334. https://doi.org/10.1016/j.conbuildmat.2020.121326.
Hu, Z. C. 2020. Study on durability of silane coupling agent/metakaolin based geopolymer[D]. [In Chinese.] Zhenjiang, China: Jiangsu Univ.
Hu, Z. C., C. S. Zhang, X. S. Gu, X. Wang, and Y. Yang. 2020. “Preparation and high temperature resistance of styrene-acrylate emulsion/metakaolin-based geopolymers.” [In Chinese.] Concrete 11: 62–66.
Karina, C., and J. Lubczak. 2012. “Application of products of reaction between melamine and glycidol as substrates for oligoetherols and polyurethane foams containing 1, 3, 5-triazine rings.” Polym. Int. 62 (12): 1735–1743. https://doi.org/10.1002/pi.4476.
Li, W., P. N. Lemougna, K. Wang, Y. He, Z. Tong, and X. Cui. 2017. “Effect of vacuum dehydration on gel structure and properties of metakaolin-based geopolymers.” Ceram. Int. 43 (16): 14340–14346. https://doi.org/10.1016/j.ceramint.2017.07.190.
Li, W., and J. Xu. 2009. “Impact characterization of basalt fiber reinforced geopolymeric concrete using a 100-mm-diameter split Hopkinson pressure bar.” Mater. Sci. Eng., A 513 (Jul): 145–153. https://doi.org/10.1016/j.msea.2009.02.033.
Li, X., S. F. Liu, and P. M. Wang. 2009. “Flexural behavior of geopolymer mortar modified by re-dispersible polymer emulsion powder.” J. Build. Mater. 12 (2): 205–208. https://doi.org/10.1109/CLEOE-EQEC.2009.5194697.
Liang, G., H. Zhu, Z. Zhang, and Q. Wu. 2019. “Effect of rice husk ash addition on the compressive strength and thermal stability of metakaolin based geopolymer.” Constr. Build. Mater. 222 (Oct): 872–881. https://doi.org/10.1016/j.conbuildmat.2019.06.200.
Liu, L. P., Y. He, L. P. He, and H. Tan. 2015. “Mechanical properties of fly ash-based geopolymer/cement composites.” J. Wuhan Univ. Technol. 37 (7): 9–12. https://doi.org/10.3963/j.issn.1671-4431.2015.07.003.
Majidi, B. 2013. “Geopolymer technology, from fundamentals to advanced applications: A review.” Mater. Technol. 24 (2): 79–87. https://doi.org/10.1179/175355509X449355.
McLellan, B. C., R. P. Williams, J. Lay, A. Van Riessen, and G. D. Corder. 2011. “Costs and carbon emissions for geopolymer pastes in comparison to ordinary Portland cement.” J. Cleaner Prod. 19 (9–10): 1080–1090. https://doi.org/10.1016/j.jclepro.2011.02.010.
Panesar, D. K., and R. Zhang. 2020. “Performance comparison of cement replacing materials in concrete: Limestone fillers and supplementary cementing materials—A review.” Constr. Build. Mater. 251 (Aug): 118866. https://doi.org/10.1016/j.conbuildmat.2020.118866.
Peyne, J., J. Gautron, J. Doudeau, E. Joussein, and S. Rossignol. 2017. “Influence of calcium addition on calcined brick clay based geopolymers: A thermal and FTIR spectroscopy study.” Constr. Build. Mater. 152 (Oct): 794–803. https://doi.org/10.1016/j.conbuildmat.2017.07.047.
Ranjbar, N., M. Mehrali, U. J. Alengaram, H. S. C. Metselaar, and M. Z. Jumaat. 2014. “Compressive strength and microstructural analysis of fly ash/palm oil fuel ash based geopolymer mortar under elevated temperatures.” Constr. Build. Mater. 65 (Aug): 114–121. https://doi.org/10.1016/j.conbuildmat.2014.04.064.
Ricciotti, L., G. Roviello, O. Tarallo, F. Borbone, C. Ferone, F. Colangelo, M. Catauro, and R. Cioffi. 2013. “Synthesis and characterizations of melamine-based epoxy resins.” Int. J. Mol. Sci. 14 (9): 18200–18214. https://doi.org/10.3390/ijms140918200.
Roviello, G., L. Ricciotti, C. Ferone, F. Colangelo, and O. Tarallo. 2015. “Fire resistant melamine based organic-geopolymer hybrid composites.” Cem. Concr. Compos. 59 (May): 89–99. https://doi.org/10.1016/j.cemconcomp.2015.03.007.
Scheffler, C., T. Förster, E. Mäder, G. Heinrich, S. Hempel, and V. Mechtcherine. 2009. “Aging of alkali-resistant glass and basalt fibers in alkaline solutions: Evaluation of the failure stress by Weibull distribution function.” J. Non-Cryst. Solids 355 (52–54): 2588–2595. https://doi.org/10.1016/j.jnoncrysol.2009.09.018.
Song, X. L., X. M. Cui, K. S. Lin, G. J. Zheng, and Y. He. 2013. “Hot-pressure forming process of PVC/geopolymer composite materials.” Appl. Clay Sci. 71 (Mar): 32–36. https://doi.org/10.1016/j.clay.2012.10.015.
Wei, J., and K. Cen. 2019. “Empirical assessing cement CO2 emissions based on China’s economic and social development during 2001-2030.” Sci. Total Environ. 653 (25): 200–211. https://doi.org/10.1016/j.scitotenv.2018.10.371.
White, C. E., J. L. Provis, T. Proffen, T. Van Proffen, and S. J. Deventer Jannie. 2010. “The effects of temperature on the local structure of metakaolin-based geopolymer binder: A neutron pair distribution function investigation.” J. Am. Ceram. Soc. 93 (10): 3486–3492. https://doi.org/10.1111/j.1551-2916.2010.03906.x.
Wu, Q., H. Ma, Q. Chen, B. Gu, S. Li, and H. Zhu. 2019. “Effect of silane modified styrene-acrylic emulsion on the waterproof properties of flue gas desulfurization gypsum.” Constr. Build. Mater. 197 (Feb): 506–512. https://doi.org/10.1016/j.conbuildmat.2018.11.185.
Xia, F., X. Zhang, T. Cai, S. Wu, and D. Zhao. 2020. “Identification of key industries of industrial sector with energy-related emissions and analysis of their potential for energy conservation and emission reduction in XinJiang, China.” Sci. Total Environ. 708 (Mar): 134587.1–134587.10. https://doi.org/10.1016/j.scitotenv.2019.134587.
Zaharaki, D., K. Komnitsas, and V. Perdikatsis. 2010. “Use of analytical techniques for identification of inorganic polymer gel composition.” J. Mater. Sci. 45 (10): 2715–2724. https://doi.org/10.1007/s10853-010-4257-2.
Zhang, C., Z. Hu, H. Zhu, X. Wang, and J. Gao. 2020a. “Effects of silane on reaction process and microstructure of metakaolin-based geopolymer composites.” J. Build. Eng. 32 (Nov): 101695. https://doi.org/10.1016/j.jobe.2020.101695.
Zhang, C., H. Zhichao, W. Xu, Z. Huajun, and Y. Xu. 2020b. “Hydration heat and hydration kinetics of silane coupling agent/metakaolin based geopolymers.” [In Chinese.] Mater. Rep. 34 (7): 14105–14109. https://doi.org/10.11896/cldb.19060055.
Zhang, S., Y. Fan, and N. Li. 2014. “Pore structure and freezing resistance of nanoclay modified cement-based materials.” Mater. Res. Innovation 18 (May): 358–362. https://doi.org/10.1179/1432891714Z.000000000434.
Zhang, S. Z., K. C. Gong, and J. W. Lu. 2004. “Novel modification method for inorganic geopolymer by using water soluble organic polymers.” Mater. Lett. 58 (7–8): 1292–1296. https://doi.org/10.1016/j.matlet.2003.07.051.
Zhang, Y. S., W. Sun, and Z. J. Li. 2008. “Infrared spectroscopy study of structural nature of geopolymeric products.” J. Wuhan Univ. Technol. 23 (4): 522–527. https://doi.org/10.1007/s11595-007-4522-7.
Zhang, Z., Y. Zhu, T. Yang, L. Li, H. Zhu, and H. Wang. 2017. “Conversion of local industrial wastes into greener cement through geopolymer technology: A case study of high-magnesium nickel slag.” J. Cleaner Prod. 141 (Jan): 463–471. https://doi.org/10.1016/j.jclepro.2016.09.147.
Zhu, H., G. Liang, Z. Zhang, Q. Wu, and J. Du. 2019. “Partial replacement of metakaolin with thermally treated rice husk ash in metakaolin-based geopolymer.” Constr. Build. Mater. 221 (Oct): 527–538. https://doi.org/10.1016/j.conbuildmat.2019.06.112.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Sep 29, 2021
Accepted: Apr 28, 2022
Published online: Nov 16, 2022
Published in print: Feb 1, 2023
Discussion open until: Apr 16, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.