A Simplified Strategy to Address Effects of the Drop of Temperature on the Gurson-Tvergaard-Needleman Model for G20Mn5QT Cast Steels
Publication: Journal of Materials in Civil Engineering
Volume 34, Issue 11
Abstract
G20Mn5QT cast steels have been widely used in cast steel connections, which may suffer from ductile fracture at ambient temperature. Northern climates make the problem even worse because the ductility of the cast steels deteriorates with the drop of temperature. For ductile fracture analysis of cast steel connections working at low temperatures, Gurson-Tvergaard-Needleman (GTN) models were calibrated and validated for G20Mn5QT cast steels at 20°C, , , and based on previous test results. The effects of the drop of temperature on material parameters in GTN models of G20Mn5QT cast steels were determined. A simplified strategy was proposed to address the effects of the drop of temperature by two GTN parameters, the void nucleation strain and the critical void volume fraction . It was found that decreased almost linearly with the drop of temperature, and had a similar relationship with the drop of temperature as the Charpy impact energy. The relationships between these two parameters and the drop of temperature were presented for the establishment of GTN models for G20Mn5QT cast steels at any possible low temperatures. Scanning electron microscope (SEM) micrographs indicated that the dimple-based ductile fracture mechanism was dominant in the fracture of G20Mn5QT cast steels, which was accompanied by possible quasi-cleavage fracture at low temperatures.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
The authors of this paper would like to express their appreciation for the financial support given by the National Natural Science Foundation of China (No. 52022067).
References
Bahrami, H., S. H. Hoseini, and G. Z. Voyiadjis. 2019. “Fracture investigation of the shape memory alloy using GTN model.” Eng. Fract. Mech. 216 (Jul): 106519. https://doi.org/10.1016/j.engfracmech.2019.106519.
Balan, T., X. Lemoine, E. Maire, and A. M. Habraken. 2015. “Implementation of a damage evolution law for dual-phase steels in Gurson-type models.” Mater. Des. 88 (Dec): 1213–1222. https://doi.org/10.1016/j.matdes.2015.09.075.
Brinnel, V., J. Langenberg, F. Kordtomeikel, Y. Di, and S. Munstermann. 2015. “Numerical derivation of strain-based criteria for ductile failure: Discussions on sensitivity and validity.” Eng. Fract. Mech. 148 (Nov): 421–440. https://doi.org/10.1016/j.engfracmech.2015.07.068.
CEN (European Committee for Standardization). 2005. Steel castings for general engineering uses. DIN EN 10293:2005. Brussels, Belgium: CEN.
Chen, Y., L. Tong, Y. Chen, and X. Zhou. 2016. “Experimental study on cyclic behavior of cast steel connectors for beam-to-column joints.” Adv. Struct. Eng. 19 (11): 1677–1695. https://doi.org/10.1177/1369433216649379.
Chen, Y., X. Zhao, and L. Tong. 2010. “Research and application of connections of structural steel casting.” Adv. Struct. Eng. 13 (3): 441–452. https://doi.org/10.1260/1369-4332.13.3.441.
Chu C. C., and A. Needleman. 1980 “Void nucleation effects in biaxially stretched sheets.” J. Eng. Mater.-T ASME 102 (3): 249–256. https://doi.org/10.1115/1.3224807.
Faleskog, J., X. Gao, and C. F. Shih. 1998. “Cell model for nonlinear fracture analysis-I. Micromechanics calibration.” Int. J. Fract. 89 (4): 355–373. https://doi.org/10.1023/A:1007421420901.
Gholipour, H., F. R. Biglari, and K. Nikbin. 2019. “Experimental and numerical investigation of ductile fracture using GTN damage model on in-situ tensile tests.” Int. J. Mech. Sci. 164 (Dec): 105170. https://doi.org/10.1016/j.ijmecsci.2019.105170.
Guan, K., D. Wang, J. Dobrovska, and K. Matocha. 2019. “Evaluation of the ductile-brittle transition temperature of anisotropic materials by small punch test with un-notched and U-notched specimens.” Theor. Appl. Fract. Mech. 102 (Aug): 98–102. https://doi.org/10.1016/j.tafmec.2019.04.003.
Gurson, A. L. 1977. “Continuum theory of ductile rupture by void nucleation and growth: Part 1—Yield criteria and flow rules for porous ductile media.” J. Eng. Mater. Technol. 99 (1): 2–15. https://doi.org/10.1115/1.3443401.
Han, Q., Q. Guo, Y. Yin, and Y. Xing. 2016. “Fatigue behaviour of G20Mn5QT cast steel and butt welds with Q345B steel.” Int. J. Steel Struct. 16 (1): 139–149. https://doi.org/10.1007/s13296-016-3020-1.
Han, Q., X. Li, M. Liu, and B. F. Spencer. 2019. “Performance analysis and macromodel simulation of steel frame structures with beam-column joints using cast steel stiffeners for progressive collapse prevention.” Thin-Walled Struct. 140 (Jul): 404–415. https://doi.org/10.1016/j.tws.2019.03.050.
Hausild, P., C. Berdin, and P. Bompard. 2005. “Prediction of cleavage fracture for a low-alloy steel in the ductile-to-brittle transition temperature range.” Mater. Sci. Eng. A 391 (1–2): 188–197. https://doi.org/10.1016/j.msea.2004.08.067.
Herion, S., J. C. de Oliveira, J. A. Packer, C. Christopoulos, and M. G. Gray. 2015. “Castings in tubular structures—The state of the art.” Proc. Inst. Civ. Eng. Struct. Build. 163 (6): 403–415. https://doi.org/10.1680/stbu.2010.163.6.403.
Huang, X., L. Tong, F. Zhou, and Y. Chen. 2013. “Fracture prediction of welded beam-to-column joints based on micromechanics damage model.” J. Build. Struct. 34 (11): 82–90. https://doi.org/10.14006/j.jzjgxb.2013.11.012.
Hütter, G., T. Linse, U. Mühlich, and M. Kuna. 2013. “Simulation of ductile crack initiation and propagation by means of a non-local Gurson-model.” Int. J. Solids Struct. 50 (5): 662–671. https://doi.org/10.1016/j.ijsolstr.2012.10.031.
Kaminski, M., and M. Strakowski. 2021. “Numerical simulation of some steel structural elements with uncertain initial porosity.” Metals 11 (5): 689. https://doi.org/10.3390/met11050689.
Kanvinde, A. M., and G. G. Deierlein. 2006. “The void growth model and the stress modified critical strain model to predict ductile fracture in structural steels.” J. Struct. Eng. 132 (12): 1907–1918. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:12(1907).
Kossakowski, P. G. 2019. “Modelling the damage of structural components with macrostructure defects.” Metals 9 (11): 1238. https://doi.org/10.3390/met9111238.
Li, L., and K. Khandelwal. 2020. “Topology optimization of energy-dissipating plastic structures with shear modified Gurson-Tvergaard-Needleman Model.” J. Struct. Eng. 146 (11): 04020229. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002790.
Liao, F., W. Wang, and Y. Chen. 2015. “Ductile fracture prediction for welded steel connections under monotonic loading based on micromechanical fracture criteria.” Eng. Struct. 94 (Jul): 16–28. https://doi.org/10.1016/j.engstruct.2015.03.038.
Nahshon, K., and J. W. Hutchinson. 2008. “Modification of the Gurson model for shear failure.” Eur. J. Mech. A 27 (1): 1–17. https://doi.org/10.1016/j.euromechsol.2007.08.002.
Needleman, A., and V. Tvergaard. 1992. “Analyses of plastic flow localization in metals.” Supplement, Appl. Mech. Rev. 45 (S3): S3–S15. https://doi.org/10.1115/1.3121390.
Nègre, P., D. Steglich, and W. Brocks. 2005. “Crack extension at an interface: Prediction of fracture toughness and simulation of crack path deviation.” Int. J. Fract. 134 (3–4): 209–229. https://doi.org/10.1007/s10704-005-0523-8.
Nielsen, K. L., and V. Tvergaard. 2010. “Ductile shear failure or plug failure of spot welds modelled by modified Gurson model.” Eng. Fract. Mech. 77 (7): 1031–1047. https://doi.org/10.1016/j.engfracmech.2010.02.031.
Oh, C. K., Y. J. Kim, J. H. Baek, Y. P. Kim, and W. Kim. 2007. “A phenomenological model of ductile fracture for API X65 steel.” Int. J. Mech. Sci. 49 (12): 1399–1412. https://doi.org/10.1016/j.ijmecsci.2007.03.008.
Qiang, B., and X. Wang. 2019. “Ductile crack growth behaviors at different locations of a weld joint for an X80 pipeline steel: A numerical investigation using GTN models.” Eng. Fract. Mech. 213 (May): 264–279. https://doi.org/10.1016/j.engfracmech.2019.04.009.
Rice, J. R., and D. M. Tracey. 1969. “On the ductile enlargement of voids in triaxial stress fields.” J. Mech. Phys. Solids 17 (3): 201–217. https://doi.org/10.1016/0022-5096(69)90033-7.
Samei, J., L. Zhou, J. Kang, and D. S. Wilkinson. 2019. “Microstructural analysis of ductility and fracture in fine-grained and ultrafine-grained vanadium-added DP1300 steels.” Int. J. Plasticity 117 (Jun): 58–70. https://doi.org/10.1016/j.ijplas.2017.12.009.
Seal, C. K., and A. H. Sherry. 2017. “Predicting the effect of constraint on cleavage and ductile fracture toughness using area contour toughness scaling.” Eng. Fract. Mech. 186 (Dec): 347–367. https://doi.org/10.1016/j.engfracmech.2017.09.029.
Seupel, A., G. Hütter, and M. Kuna. 2020. “On the identification and uniqueness of constitutive parameters for a non-local GTN-model.” Eng. Fract. Mech. 229 (Apr): 106817. https://doi.org/10.1016/j.engfracmech.2019.106817.
Teng, B., W. Wang, and Y. Xu. 2017. “Ductile fracture prediction in aluminum alloy 5A06 sheet forming based on GTN damage model.” Eng. Fract. Mech. 186 (Dec): 242–254. https://doi.org/10.1016/j.engfracmech.2017.10.014.
Tong, L., Y. Chen, Y. Chen, and C. Fang. 2016. “Cyclic behaviour of beam-to-column joints with cast steel connectors.” J. Constr. Steel Res. 116 (Jan): 114–130. https://doi.org/10.1016/j.jcsr.2015.09.005.
Tu, H., S. Schmauder, and U. Weber. 2012. “Numerical study of electron beam welded butt joints with the GTN model.” Comput. Mech. 50 (2): 245–255. https://doi.org/10.1007/s00466-012-0739-1.
Tvergaard, V., and A. Needleman. 1984. “Analysis of the cup-cone fracture in a round tensile test bar.” Acta Metall. 32 (1): 157–169. https://doi.org/10.1016/0001-6160(84)90213-X.
Xia, J., and H. Jin. 2018. “Analysis of residual stresses and variation mechanism in dissimilar girth welded joints between tubular structures and steel castings.” Int. J. Press. Vessels Pip. 165 (Aug): 104–113. https://doi.org/10.1016/j.ijpvp.2018.06.003.
Yan, H., Q. Qi, and H. Jin. 2019. “Damage evolution analysis on cast steel joints with porosity defects.” J. Southeast Univ. 49 (5): 904–910. https://doi.otg/10.3969/j.issn.1001-0505.2019.05.013.
Yan, R., H. Xin, and M. Veljkovic. 2021. “Ductile fracture simulation of cold-formed high strength steel using GTN damage model.” J. Constr. Steel Res. 184 (Sep): 106832. https://doi.org/10.1016/j.jcsr.2021.106832.
Yin, Y., S. Li, Q. Han, and M. Li. 2020. “Material parameters in void growth model for G20Mn5QT cast steel at low temperatures.” Constr. Build. Mater. 243 (May): 118123. https://doi.org/10.1016/j.conbuildmat.2020.118123.
Yin, Y., T. Ma, Q. Han, Y. Lu, and Y. Zhang. 2022. “Material parameters in the GTN model for ductile fracture simulation of G20Mn5QT cast steel.” J. Mater. Civ. Eng. 34 (1): 04021412. https://doi.org/10.1061/(ASCE)MT.1943-5533.0004050.
Zhang, Y., E. Lorentz, and J. Besson. 2017. “Ductile damage modelling with locking-free regularised GTN model.” Int. J. Numer. Methods Eng. 113 (13): 1871–1903. https://doi.org/10.1002/nme.5722.
Zhou, Z., S. Bhamare, and D. Qian. 2014. “Ductile fracture in thin sheet metals: A FEM study of the Sandia fracture challenge problem based on the Gurson-Tvergaard-Needleman fracture model.” Int. J. Fract. 186 (1–2): 185–200. https://doi.org/10.1007/s10704-014-9930-z.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Nov 15, 2021
Accepted: Mar 1, 2022
Published online: Aug 22, 2022
Published in print: Nov 1, 2022
Discussion open until: Jan 22, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.