Technical Papers
Aug 19, 2022

Effects of Decarbonized Coal Gasification Coarse Slag and Fine Ash on Properties of Cement Paste as Supplementary Cementitious Materials

Publication: Journal of Materials in Civil Engineering
Volume 34, Issue 11

Abstract

Coal gasification coarse slag (CGCS) and coal gasification fine ash (CGFA), both of which are composed of inorganic oxides and unburned carbon, are the two solid wastes produced in the process of coal gasification. However, the utilization of CGCS and CGFA in cement and concrete is greatly limited due to the existence of unburned carbon. After the unburned carbon is removed, CGCS and CGFA can be used in cement-based materials as supplementary cementitious materials on a large scale. This paper studied the influence of decarbonized CGCS and CGFA on hydration heat, setting time, and compressive strength of cement paste. The experimental results show that replacement of cement by CGFA delayed the time of the maximum exothermic peak, and replacement of cement by CGCS greatly reduced the peak value of the maximum exothermic peak; hence, it is revealed that both CGFA and CGCS had a retarding effect on the setting time of cement paste. Moreover, the pozzolanic activity of CGCS was lower than that of CGFA according to the dissolution property in the alkaline solution and compressive strength of cement mortar. Furthermore, the fineness of CGFA particles showed a harmful effect on the fluidity of fresh cement binders, but the fineness of CGFA particles had a positive effect on the pozzolanic activity and thus is beneficial to the strength of cement mortar.

Get full access to this article

View all available purchase options and get full access to this article.

Data Availability Statement

The experimental data utilized in this paper are available from the corresponding author upon request.

References

Anastasiou, E. K. 2021. “Effect of high calcium fly ash, ladle furnace slag, and limestone filler on packing density, consistency, and strength of cement pastes.” Materials 14 (2): 301–312. https://doi.org/10.3390/ma14020301.
Bentz, D. P., and C. F. Ferraris. 2010. “Rheology and setting of high volume fly ash mixtures.” Cem. Concr. Compos. 32 (4): 265–270. https://doi.org/10.1016/j.cemconcomp.2010.01.008.
Chen, W., Y. Li, P. Shen, and Z. Shui. 2013. “Microstructural development of hydrating portland cement paste at early ages investigated with non-destructive methods and numerical simulation.” J. Nondestr. Eval. 32 (3): 228–237. https://doi.org/10.1007/s10921-013-0175-y.
Chen, Y., X. Zhou, S. Wan, R. Zheng, J. Tong, H. Hou, and T. Wang. 2019. “Synthesis and characterization of geopolymer composites based on gasification coal fly ash and steel slag.” Constr. Build. Mater. 211 (Jun): 646–658. https://doi.org/10.1016/j.conbuildmat.2019.03.292.
Chen, Z., and C. S. Poon. 2017. “Comparative studies on the effects of sewage sludge ash and fly ash on cement hydration and properties of cement mortars.” Constr. Build. Mater. 154 (Nov): 791–803. https://doi.org/10.1016/j.conbuildmat.2017.08.003.
Chinese Standard. 1999. Method of testing cements—Determination of strength. GB/T 17671-1999. Beijing: Chinese Standard.
Chinese Standard. 2005. The method for fluidity of cement mortar. GB/T 2419-2005. Beijing: Chinese Standard.
Chinese Standard. 2011. Test methods for water requirement of normal consistency, setting time and soundness of the portland cement. GB/T 1346-2011. Beijing: Chinese Standard.
Ferreiro, S., D. Herfort, and J. S. Damtoft. 2017. “Effect of raw clay type, fineness, water-to-cement ratio and fly ash addition on workability and strength performance of calcined clay–limestone portland cements.” Cem. Concr. Res. 101 (Nov): 1–12. https://doi.org/10.1016/j.cemconres.2017.08.003.
Fořt, J., J. Šál, R. Ševčík, M. Doleželová, M. Keppert, M. Jerman, M. Záleská, V. Stehel, and R. Černý. 2021. “Biomass fly ash as an alternative to coal fly ash in blended cements: Functional aspects.” Constr. Build. Mater. 271 (Feb): 121544–121554. https://doi.org/10.1016/j.conbuildmat.2020.121544.
Fořt, J., J. Šál, J. Žák, and R. Černý. 2020. “Assessment of wood-based fly ash as alternative cement replacement.” Sustainability 12 (22): 9580–9595. https://doi.org/10.3390/su12229580.
Garcia-Lodeiro, I., V. Carcelen-Taboada, A. Fernández-Jiménez, and A. Palomo. 2016. “Manufacture of hybrid cements with fly ash and bottom ash from a municipal solid waste incinerator.” Constr. Build. Mater. 105 (Feb): 218–226. https://doi.org/10.1016/j.conbuildmat.2015.12.079.
Jeong, Y., S.-H. Kang, M. O. Kim, and J. Moon. 2020. “Acceleration of cement hydration from supplementary cementitious materials: Performance comparison between silica fume and hydrophobic silica.” Cem. Concr. Compos. 112 (Sep): 103688–103695. https://doi.org/10.1016/j.cemconcomp.2020.103688.
Kocak, Y. 2020. “Effects of metakaolin on the hydration development of portland–composite cement.” J. Build. Eng. 31 (9): 101419–101427. https://doi.org/10.1016/j.jobe.2020.101419.
Li, Z., D. Lu, and X. Gao. 2020. “Analysis of correlation between hydration heat release and compressive strength for blended cement pastes.” Constr. Build. Mater. 260 (Nov): 120436. https://doi.org/10.1016/j.conbuildmat.2020.120436.
Li, Z., Y. Zhang, H. Zhao, H. Chen, and R. He. 2019. “Structure characteristics and composition of hydration products of coal gasification slag mixed cement and lime.” Constr. Build. Mater. 213 (Jul): 265–274. https://doi.org/10.1016/j.conbuildmat.2019.03.163.
Linderoth, O., P. Johansson, and L. Wadsö. 2020. “Development of pore structure, moisture sorption and transport properties in fly ash blended cement-based materials.” Constr. Build. Mater. 261 (Nov): 120007. https://doi.org/10.1016/j.conbuildmat.2020.120007.
Lun, Y., and F. Zheng. 2019. “Effect of steel slag powder, fly ash, and silica fume on the mechanical properties and durability of cement mortar.” Mater. Express 9 (9): 1049–1054. https://doi.org/10.1166/mex.2019.1587.
Luo, F., Y. Jiang, and C. Wei. 2021. “Potential of decarbonized coal gasification residues as the mineral admixture of cement-based material.” Constr. Build. Mater. 269 (Feb): 121259–121267. https://doi.org/10.1016/j.conbuildmat.2020.121259.
Millán-Corrales, G., J. R. González-López, A. Palomo, and A. Fernandez-Jiménez. 2020. “Replacing fly ash with limestone dust in hybrid cements.” Constr. Build. Mater. 243 (May): 118169–118177. https://doi.org/10.1016/j.conbuildmat.2020.118169.
Navarrete, I., F. Vargas, P. Martinez, A. Paul, and M. Lopez. 2021. “Flue gas desulfurization (FGD) fly ash as a sustainable, safe alternative for cement-based materials.” J. Cleaner Prod. 283 (1): 12646–12657. https://doi.org/10.1016/j.jclepro.2020.124646.
Rajamma, R., L. Senff, M. J. Ribeiro, J. A. Labrincha, R. J. Ball, G. C. Allen, and V. M. Ferreira. 2015. “Biomass fly ash effect on fresh and hardened state properties of cement based materials.” Composites, Part B 77 (4): 1–9. https://doi.org/10.1016/j.compositesb.2015.03.019.
Shen, Y., X. Chen, W. Zhang, X. Li, and J. Qian. 2018. “Influence of ternesite on the properties of calcium sulfoaluminate cements blended with fly ash.” Constr. Build. Mater. 193 (Dec): 221–229. https://doi.org/10.1016/j.conbuildmat.2018.10.202.
Song, J., L. Wang, J. Zhu, S. Feng, Y. Ouyang, F. Leng, J. Song, and L. Zhang. 2019. “Effect of the fineness of copper slag on the early hydration properties of cement–copper slag binder.” J. Therm. Anal. Calorim. 138 (1): 243–253. https://doi.org/10.1007/s10973-019-08240-6.
Sun, J., Z. Zhang, and G. Hou. 2020. “Utilization of fly ash microsphere powder as a mineral admixture of cement: Effects on early hydration and microstructure at different curing temperatures.” Powder Technol. 375 (5): 262–270. https://doi.org/10.1016/j.powtec.2020.07.084.
Sun, Y., Q. Jiang, Z. Wang, P. Fu, J. Li, T. Yang, and Y. Yin. 2014. “Investigation of the sources and evolution processes of severe haze pollution in Beijing in January 2013.” J. Geophys. Res.: Atmos. 119 (7): 4380–4398. https://doi.org/10.1002/2014JD021641.
Tang, J., S. Wei, W. Li, S. Ma, P. Ji, and X. Shen. 2019. “Synergistic effect of metakaolin and limestone on the hydration properties of Portland cement.” Constr. Build. Mater. 223 (Oct): 177–184. https://doi.org/10.1016/j.conbuildmat.2019.06.059.
Wang, L., F. Guo, Y. Lin, H. Yang, and S. W. Tang. 2020. “Comparison between the effects of phosphorous slag and fly ash on the C-S-H structure, long-term hydration heat and volume deformation of cement-based materials.” Constr. Build. Mater. 250 (Jul): 118807–118826. https://doi.org/10.1016/j.conbuildmat.2020.118807.
Wang, Y., Z. Xu, J. Wang, Z. Zhou, P. Du, and X. Cheng. 2019. “Synergistic effect of nano-silica and silica fume on hydration properties of cement-based materials.” J. Therm. Anal. Calorim. 140 (5): 2225–2235. https://doi.org/10.1007/s10973-019-08929-8.
Wei, J., and B. Gencturk. 2019. “Hydration of ternary portland cement blends containing metakaolin and sodium bentonite.” Cem. Concr. Res. 123 (Sep): 105772–105787. https://doi.org/10.1016/j.cemconres.2019.05.017.
Zhao, X., C. Zeng, Y. Mao, W. Li, Y. Peng, T. Wang, B. Eiteneer, V. Zamansky, and T. Fletcher. 2010. “The surface characteristics and reactivity of residual carbon in coal gasification slag.” Energy Fuels 24 (1): 91–94. https://doi.org/10.1021/ef9005065.
Zunino, F., D. P. Bentz, and J. Castro. 2018. “Reducing setting time of blended cement paste containing high-SO3 fly ash (HSFA) using chemical/physical accelerators and by fly ash pre-washing.” Cem. Concr. Compos. 90 (Jul): 14–26. https://doi.org/10.1016/j.cemconcomp.2018.03.018.

Information & Authors

Information

Published In

Go to Journal of Materials in Civil Engineering
Journal of Materials in Civil Engineering
Volume 34Issue 11November 2022

History

Received: Sep 28, 2021
Accepted: Feb 25, 2022
Published online: Aug 19, 2022
Published in print: Nov 1, 2022
Discussion open until: Jan 19, 2023

Permissions

Request permissions for this article.

Authors

Affiliations

Feng Luo, Ph.D. [email protected]
Professor, Key Laboratory of Automobile Materials of Ministry of Education and Dept. of Materials Science and Engineering, Jilin Univ., Changchun 130025, China (corresponding author). Email: [email protected]
Professor, Key Laboratory of Automobile Materials of Ministry of Education and Dept. of Materials Science and Engineering, Jilin Univ., Changchun 130025, China. Email: [email protected]

Metrics & Citations

Metrics

Citations

Download citation

If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.

Cited by

  • Utilization of Gasification Coarse Slag Powder as Cement Partial Replacement: Hydration Kinetics Characteristics, Microstructure and Hardening Properties, Materials, 10.3390/ma16051922, 16, 5, (1922), (2023).
  • The impact of coal gasification slag powder on fluidity, rheology and viscoelasticity properties of fresh cement paste, Journal of Building Engineering, 10.1016/j.jobe.2023.106237, (106237), (2023).

View Options

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Media

Figures

Other

Tables

Share

Share

Copy the content Link

Share with email

Email a colleague

Share