Textile Reinforced Concrete Subjected to Acidic and Alkaline Environment: Experimental Study
Publication: Journal of Materials in Civil Engineering
Volume 34, Issue 8
Abstract
Textile-reinforced concrete (TRC) is a special type of concrete gaining popularity nowadays in the field of civil engineering due to its technical advantages. Owing to the absence of coarse aggregate and high paste content, the properties of TRC are different from conventional concrete. Further, for the same reason, the characteristics against aggressive environmental conditions are different for TRC. As TRC can be used in many applications subjected to aggressive environments, in the present work, the mechanical and durability characteristics of TRC against acidic and alkaline environments are studied. The effect of the thickness of TRC specimens is also studied by using specimens of varied thicknesses such as 10, 15, and 20 mm. Compressive and flexural behavior tests for mechanical properties and water permeability as well as weight loss tests for durability characteristics are conducted. The results obtained showed that there is no significant weight loss due to the exposure to acidic or alkaline environments. However, there is a change in the compressive and flexural behavior of the TRC specimens subjected to various pH. This shows that the material can perform differently for strength and durability properties, as durability is mainly concerned with the density/permeability of the concrete whereas the strength depends on many other factors. Further, it is concluded that the increased thickness reduces the impact of aggressive solutions on TRC.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
References
ACI (American Concrete Institute). 2001. “Guide to durable concrete.” In ACI manual of concrete practice. Farmington Hills, MI: ACI.
Bari, M., and S. Kawamoto. 2014. “Process hygiene | types of sterilant.” In Encyclopedia of food microbiology. 2nd ed., edited by C. A. Batt and M. L. Tortorello, 216–225. Oxford: Academic Press.
BIS (Bureau of Indian Standards). 2000. Plain and reinforced concrete-code of practice (fourth revision). IS456:2000. New Delhi, India: BIS.
BIS (Bureau of Indian Standards). 2004. Methods of tests for strength of concrete. IS516:1959. New Delhi, India: BIS.
Butler, M., V. Mechtcherine, and S. Hempel. 2010. “Durability of textile reinforced concrete made with AR glass fibre: Effect of the matrix composition.” Mater. Struct. 43 (10): 1351–1368. https://doi.org/10.1617/s11527-010-9586-8.
De Munck, M., M. El Kadi, E. Tsangouri, J. Vervloet, S. Verbruggen, J. Wastiels, T. Tysmans, and O. Remy. 2018. “Influence of environmental loading on the tensile and cracking behaviour of textile reinforced cementitious composites.” Constr. Build. Mater. 181 (Aug): 325–334. https://doi.org/10.1016/j.conbuildmat.2018.06.045.
DIN (Deutsches Institut für Normung). 1991. German standard for determination of permeability of concrete. DIN 1048 (part-5). Berlin: Germany National Standards and Organization.
Fattuhi, N., and B. Hughes. 1988a. “Ordinary portland cement mixes with selected admixtures subjected to sulfuric acid attack.” ACI Mater. J. 85 (6): 512–518. https://doi.org/10.14359/2269.
Fattuhi, N., and B. Hughes. 1988b. “The performance of cement paste and concrete subjected to sulphuric acid attack.” Cem. Concr. Res. 18 (4): 545–553. https://doi.org/10.1016/0008-8846(88)90047-6.
Glass, G. 2003. “6.07—Deterioration of steel reinforced concrete.” In Comprehensive structural integrity, edited by I. Milne, R. Ritchie, and B. Karihaloo, 321–350. Oxford: Pergamon.
Hadigheh, S., R. Gravina, and S. Smith. 2017. “Effect of acid attack on FRP-to-concrete bonded interfaces.” Constr. Build. Mater. 152 (Oct): 285–303. https://doi.org/10.1016/j.conbuildmat.2017.06.140.
Kong, K., Z. Mesticou, M. Michel, A. Si Larbi, and A. Junes. 2017. “Comparative characterization of the durability behaviour of textile-reinforced concrete (TRC) under tension and bending.” Compos. Struct. 179 (Nov): 107–123. https://doi.org/10.1016/j.compstruct.2017.07.030.
Kwak, H.-G., and F. C. Filippou. 1990. Finite element analysis of reinforced concrete structures under monotonic loads. Berkeley, CA: Univ. of California.
Lesovik, V., D. Popov, R. Fediuk, E. Glagolev, and D.-Y. Yoo. 2020. “Improvement of mechanical and durability behaviors of textile concrete: Effect of polymineral composite binders and superabsorbent polymers.” J. Mater. Civ. Eng. 32 (11): 04020315. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003417.
Mechtcherine, V., and M. Lieboldt. 2011. “Permeation of water and gases through cracked textile reinforced concrete.” Cem. Concr. Compos. 33 (7): 725–734. https://doi.org/10.1016/j.cemconcomp.2011.04.001.
Mehta, P. 1985. “Studies on chemical resistance of low water/cement ratio concretes.” Cem. Concr. Res. 15 (6): 969–978. https://doi.org/10.1016/0008-8846(85)90087-0.
Monteiro, P. J. M., and P. Kumar Mehta. 1999. Concrete microstructure, properties, and materials. New York: McGraw-Hill Education.
Neville, A. M. 1981. Properties of concrete. London: Pitman Publication.
Nnadi, E. O., and J. Lizarazo-Marriaga. 2013. “Acid corrosion of plain and reinforced concrete sewage systems.” J. Mater. Civ. Eng. 25 (9): 1353–1356. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000641.
Nobili, A. 2016. “Durability assessment of impregnated glass fabric reinforced cementitious matrix (GFRCM) composites in the alkaline and saline environments.” Constr. Build. Mater. 105 (Feb): 465–471. https://doi.org/10.1016/j.conbuildmat.2015.12.173.
Palanisamy, M., P. Kolandasamy, P. Awoyera, R. Gobinath, S. Muthusamy, T. R. Krishnasamy, and A. Viloria. 2020. “Permeability properties of lightweight self-consolidating concrete made with coconut shell aggregate.” J. Mater. Res. Technol. 9 (3): 3547–3557. https://doi.org/10.1016/j.jmrt.2020.01.092.
PCA (Portland Cement Association). 2002. Types and causes of concrete deterioration. Vol. IS536.01. Skokie, IL: PCA.
Qin, Y., M. Li, Y. Li, W. Ma, Z. Xu, J. Chai, and H. Zhou. 2021. “Effects of nylon fiber and nylon fiber fabric on the permeability of cracked concrete.” Constr. Build. Mater. 274 (Mar): 121786. https://doi.org/10.1016/j.conbuildmat.2020.121786.
Regourd, M. 1981. “32-RCA, résistance chimique du béton.” Mater. Constr. 14 (2): 130–137. https://doi.org/10.1007/BF02547647.
Rezania, M., M. Panahandeh, S. Razavi, and F. Berto. 2019. “Experimental study of the simultaneous effect of nano-silica and nano-carbon black on permeability and mechanical properties of the concrete.” Theor. Appl. Fract. Mech. 104 (Dec): 102391. https://doi.org/10.1016/j.tafmec.2019.102391.
Rossi, E., N. Randl, T. Mészöly, and P. Harsányi. 2021. “Flexural strengthening with fiber-/textile-reinforced concrete.” ACI Struct. J. 118 (4): 97–107. https://doi.org/10.14359/51732647.
Turkel, S., B. Felekoglu, and S. Dulluc. 2007. “Influence of various acids on the physico-mechanical properties of pozzolanic cement mortars.” Sadhana 32 (6): 683–691.
Valeri, P., P. Guaita, R. Baur, M. Fernández Ruiz, D. Fernández-Ordóñez, and A. Muttoni. 2020. “Textile reinforced concrete for sustainable structures: Future perspectives and application to a prototype pavilion.” Struct. Concr. 21 (6): 2251–2267. https://doi.org/10.1002/suco.201900511.
Yin, S.-P., J. Sheng, X.-X. Wang, and S.-G. Li. 2016. “Experimental investigations of the bending fatigue performance of TRC-strengthened RC beams in conventional and aggressive chlorate environments.” J. Compos. Constr. 20 (2): 04015051. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000617.
Zhou, L., Q. Wang, and F. Zhang. 2010. “Effect of mineral admixture and pore structure on the permeability of concrete.” Shuili Fadian Xuebao/J. Hydro Electr. Eng. 29 (3): 196–201.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Jun 23, 2021
Accepted: Nov 30, 2021
Published online: May 18, 2022
Published in print: Aug 1, 2022
Discussion open until: Oct 18, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Smitha Gopinath, Ramesh Gopal, Hemalatha Thiyagarajan, Experimental investigation on concrete overlaid with textile reinforced mortar: Influences of mix, temperature, and chemical exposure, Frontiers of Structural and Civil Engineering, 10.1007/s11709-022-0896-z, (2023).