Technical Papers
May 18, 2022

Evaluation of Rejuvenated Aged-Asphalt Binder by Waste-Cooking Oil with Secondary Aging Considered

Publication: Journal of Materials in Civil Engineering
Volume 34, Issue 8

Abstract

Waste-cooking oil (WCO) has received significant attention regarding rejuvenating aged-asphalt binder (AB) in recent years. Most current studies focused on whether the performance of WCO rejuvenated aged-asphalt binder (WRAB) can meet the requirements without considering the susceptibility to performance change after the reaging process (secondary aging). To evaluate the performance of WRAB under real pavement conditions, this study first evaluated the rejuvenation effect of WCO from the three perspectives of basic physical, rheological, and chemical characteristics. Then, WRAB was secondary aging carried out to evaluate the aging resistance from the rheological and chemical characteristics compared with virgin asphalt binder (VB). The basic physical properties were based on penetration, softening point, ductility, and rotational viscosity. The rheological characteristics consisted of temperature sweep, frequency sweep, linear amplitude sweep (LAS), and bending beam rheometer (BBR) tests. The chemical analysis was composed of Fourier transform infrared spectrometry (FT-IR), gel permeation chromatography (GPC), and differential scanning calorimetry (DSC) analysis. The results indicated that the basic physical properties of AB could be rejuvenated to the level of VB. The WCO had a better effect in rejuvenating low-temperature than high-temperature performance. After secondary aging, WRAB had better rutting resistance and lower phase angle compared with VB. The WRAB had lower yield stress but higher fatigue life—more suitable for light traffic roads—and the WCO could decrease the strain sensitivity of the WRAB. After secondary aging, WRAB had better aging resistance in fatigue life. According to the DSC results, WRAB had better low-temperature performance after secondary aging. Based on the weighted average molecular weight (Mw), WRAB had a larger molecular weight to secondary aging. A good correlation existed between Mw and rheological parameters for the WRAB after secondary aging.

Get full access to this article

View all available purchase options and get full access to this article.

Data Availability Statement

Some or all data, models, or code that support the findings of this study are available from the corresponding author on reasonable request.

Acknowledgments

This study is financially supported by the Fundamental Research Funds for the Central Universities [DUT20JC50 and DUT17RC (3)006] and the National Natural Science Foundation of China (Grant No. 51508137).

References

Ahmed, R. B., and K. Hossain. 2020. “Waste-cooking oil as an asphalt rejuvenator: A state-of-the-art review.” Constr. Build. Mater. 230 (Jan): 116985. https://doi.org/10.1016/j.conbuildmat.2019.116985.
Asli, H., E. Ahmadinia, M. Zargar, and M. R. Karim. 2012. “Investigation on physical properties of waste-cooking oil–Rejuvenated bitumen binder.” Constr. Build. Mater. 37 (Dec): 398–405. https://doi.org/10.1016/j.conbuildmat.2012.07.042.
Azahar, W. N. A. W., R. P. Jaya, M. R. Hainin, M. Bujang, and N. Ngadi. 2016. “Chemical modification of waste-cooking oil to improve the physical and rheological properties of asphalt binder.” Constr. Build. Mater. 126 (Nov): 218–226. https://doi.org/10.1016/j.conbuildmat.2016.09.032.
Azahar, W. N. A. W., R. P. Jaya, M. R. Hainin, M. Bujang, and N. Ngadi. 2017. “Mechanical performance of asphaltic concrete incorporating untreated and treated waste-cooking oil.” Constr. Build. Mater. 150 (Sep): 653–663. https://doi.org/10.1016/j.conbuildmat.2017.06.048.
Baghaee Moghaddam, T., and H. Baaj. 2016. “The use of rejuvenating agents in production of recycled hot mix asphalt: A systematic review.” Constr. Build. Mater. 114 (Jul): 805–816. https://doi.org/10.1016/j.conbuildmat.2016.04.015.
Baghaee Moghaddam, T., M. Karim, and M. Abdelaziz. 2011. “A review on fatigue and rutting performance of asphalt mixes.” Sci. Res. Essays 6 (4): 670–682. https://doi.org/10.5897/SRE10.946.
Chen, M., B. Leng, S. Wu, and Y. Sang. 2014a. “Physical, chemical and rheological properties of waste edible vegetable oil rejuvenated asphalt binders.” Constr. Build. Mater. 66 (Sep): 286–298. https://doi.org/10.1016/j.conbuildmat.2014.05.033.
Chen, M., F. Xiao, B. Putman, B. Leng, and S. Wu. 2014b. “High temperature properties of rejuvenating recovered binder with rejuvenator, waste cooking and cotton seed oils.” Constr. Build. Mater. 59 (May): 10–16. https://doi.org/10.1016/j.conbuildmat.2014.02.032.
Chinese Standard. 2004. Technical specification for construction of highway asphalt pavements. JTGF40. Beijing: Chinese Standard.
Gao, J., J. Yang, D. Yu, Y. Jiang, K. Ruan, W. Tao, C. Sun, and L. Luo. 2021. “Reducing the variability of multi-source reclaimed asphalt pavement materials: A practice in China.” Constr. Build. Mater. 278 (Apr): 122389. https://doi.org/10.1016/j.conbuildmat.2021.122389.
Grossegger, D., H. Grothe, B. Hofko, and M. Hospodka. 2017. “Fluorescence spectroscopic investigation of bitumen aged by field exposure respectively modified rolling thin film oven test.” Road Mater. Pavement Des. 19 (4): 992–1000. https://doi.org/10.1080/14680629.2017.1281833.
Hintz, C., R. Velasquez, Z. J. Li, and H. Bahia. 2011. Effect of oxidative aging on binder fatigue performance, asphalt paving technology, 527–547. Tampa, FL: Association of Asphalt Paving Technologists.
IUPAC-IUB Commission on Biochemical Nomenclature (CBN). 1977. “The nomenclature of lipids.” Eur. J. Biochem. 79: 11–21. https://doi.org/10.1111/j.1432-1033.1977.tb11778.x.
Jia, X., B. Huang, B. F. Bowers, and S. Zhao. 2014. “Infrared spectra and rheological properties of asphalt cement containing waste engine oil residues.” Constr. Build. Mater. 50 (Jan): 683–691. https://doi.org/10.1016/j.conbuildmat.2013.10.012.
Lam, M. K., K. T. Lee, and A. R. Mohamed. 2010. “Homogeneous, heterogeneous and enzymatic catalysis for transesterification of high free fatty acid oil (waste-cooking oil) to biodiesel: A review.” Biotechnol. Adv. 28 (4): 500–518. https://doi.org/10.1016/j.biotechadv.2010.03.002.
Le Guern, M., E. Chailleux, F. Farcas, S. Dreessen, and I. Mabille. 2010. “Physico-chemical analysis of five hard bitumens: Identification of chemical species and molecular organization before and after artificial aging.” Fuel 89 (11): 3330–3339. https://doi.org/10.1016/j.fuel.2010.04.035.
Lei, Z., T. Yi-qiu, and H. Bahia. 2016. “Relationship between glass transition temperature and low temperature properties of oil modified binders.” Constr. Build. Mater. 104 (Feb): 92–98. https://doi.org/10.1016/j.conbuildmat.2015.12.048.
Ma, H., D. Wang, C. Zhou, and D. Feng. 2015. “Calibration on MEPDG low temperature cracking model and recommendation on asphalt pavement structures in seasonal frozen region of China.” Adv. Mater. Sci. Eng. 2015: 1–11. https://doi.org/10.1155/2015/83042.
Maharaj, R., V. Ramjattan-Harry, and N. Mohamed. 2015. “Rutting and fatigue cracking resistance of waste-cooking oil modified trinidad asphaltic materials.” Sci. World J. 2015: 385013. https://doi.org/10.1155/2015/385013.
Mamun, A. A., and H. I. Al-Abdul Wahhab. 2018. “Comparative laboratory evaluation of waste-cooking oil rejuvenated asphalt concrete mixtures for high contents of reclaimed asphalt pavement.” Int. J. Pavement Eng. 21 (11): 1297–1308. https://doi.org/10.1080/10298436.2018.1539486.
Singh, D., P. K. Ashish, A. Kataware, and A. Habal. 2017. “Evaluating performance of PPA-and-elvaloy-modified binder containing WMA additives and lime using MSCR and LAS tests.” J. Mater. Civ. Eng. 29 (8): 04017064. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001934.
Soenen, H., X. Lu, and O.-V. Laukkanen. 2016. “Oxidation of bitumen: Molecular characterization and influence on rheological properties.” Rheol. Acta 55 (4): 315–326. https://doi.org/10.1007/s00397-016-0919-6.
Sun, X., H. Yuan, C. Song, X. Deng, G. Lv, X. Li, and A. Hu. 2020. “Rapid and simultaneous determination of physical and chemical properties of asphalt by ATR-FTIR spectroscopy combined with a novel calibration-free method.” Constr. Build. Mater. 230 (Jan): 116950. https://doi.org/10.1016/j.conbuildmat.2019.116950.
Sun, Y., W. Wang, and J. Chen. 2019a. “Investigating impacts of warm-mix asphalt technologies and high reclaimed asphalt pavement binder content on rutting and fatigue performance of asphalt binder through MSCR and LAS tests.” J. Cleaner Prod. 219 (May): 879–893. https://doi.org/10.1016/j.jclepro.2019.02.131.
Sun, Z., J. Yi, Z. Chen, S. Xie, M. Xu, and D. Feng. 2019b. “Chemical and rheological properties of polymer modified bitumen incorporating bio-oil derived from waste-cooking oil.” Mater. Struct. 52 (5): 106. https://doi.org/10.1617/s11527-019-1400-7.
Sun, Z., J. Yi, Y. Huang, D. Feng, and C. Guo. 2016. “Properties of asphalt binder modified by bio-oil derived from waste-cooking oil.” Constr. Build. Mater. 102 (Jan): 496–504. https://doi.org/10.1016/j.conbuildmat.2015.10.173.
Taherkhani, H., and F. Noorian. 2018. “Comparing the effects of waste engine and cooking oil on the properties of asphalt concrete containing reclaimed asphalt pavement (RAP).” Road Mater. Pavement Des. 21 (5): 1238–1257. https://doi.org/10.1080/14680629.2018.1546220.
Wang, C., T. Xie, and W. Cao. 2019. “Performance of bio-oil modified paving asphalt: Chemical and rheological characterization.” Mater. Struct. 52 (5): 1–13. https://doi.org/10.1617/s11527-019-1399-9.
Wang, W., S. Huang, Y. Qin, Y. Sun, and J. Chen. 2020. “Multi-scale study on the high percentage warm-mix recycled asphalt binder based on chemical experiments.” Constr. Build. Mater. 252 (Aug): 119124. https://doi.org/10.1016/j.conbuildmat.2020.119124.
Xu, M., J. Yi, Z. Pei, D. Feng, Y. Huang, and Y. Yang. 2017. “Generation and evolution mechanisms of pavement asphalt aging based on variations in surface structure and micromechanical characteristics with AFM.” Mater. Today Commun. 12 (Sep): 106–118. https://doi.org/10.1016/j.mtcomm.2017.07.006.
Yang, S. H., and L. C. Lee. 2016. “Characterizing the chemical and rheological properties of severely aged reclaimed asphalt pavement materials with high recycling rate.” Constr. Build. Mater. 111 (May): 139–146. https://doi.org/10.1016/j.conbuildmat.2016.02.058.
Yu, H., Z. Leng, and Z. Gao. 2016. “Thermal analysis on the component interaction of asphalt binders modified with crumb rubber and warm mix additives.” Constr. Build. Mater. 125 (Oct): 168–174. https://doi.org/10.1016/j.conbuildmat.2016.08.032.
Yusoff, N. I. M., M. T. Shaw, and G. D. Airey. 2011. “Modelling the linear viscoelastic rheological properties of bituminous binders.” Constr. Build. Mater. 25 (5): 2171–2189. https://doi.org/10.1016/j.conbuildmat.2010.11.086.
Zahoor, M., S. Nizamuddin, S. Madapusi, and F. Giustozzi. 2021. “Sustainable asphalt rejuvenation using waste-cooking oil: A comprehensive review.” J. Cleaner Prod. 278 (Jan): 123304. https://doi.org/10.1016/j.jclepro.2020.123304.
Zargar, M., E. Ahmadinia, H. Asli, and M. R. Karim. 2012. “Investigation of the possibility of using waste-cooking oil as a rejuvenating agent for aged bitumen.” J. Hazard. Mater. 233–234 (Sep): 254–258. https://doi.org/10.1016/j.jhazmat.2012.06.021.
Zeng, M., H. U. Bahia, H. Zhai, M. R. Anderson, and P. Turner. 2001. “Rheological modeling of modified asphalt binders and mixtures.” Proc. Assoc. Asphalt Paving Technol. 70: 403–441.
Zhang, D., M. Chen, S. Wu, J. Liu, and S. Amirkhanian. 2017. “Analysis of the relationships between waste-cooking oil qualities and rejuvenated asphalt properties.” Materials 10 (5): 508. https://doi.org/10.3390/ma10050508.
Zhang, H., K. Shen, G. Xu, J. Tong, R. Wang, D. Cai, and X. Chen. 2020. “Fatigue resistance of aged asphalt binders: An investigation of different analytical methods in linear amplitude sweep test.” Constr. Build. Mater. 241 (Apr): 118099. https://doi.org/10.1016/j.conbuildmat.2020.118099.
Zhang, Q.-S., Y.-L. Chen, and X.-L. Li. 2009. “Rutting in asphalt pavement under heavy load and high temperature.” In Asphalt material characterization, accelerated testing, and highway management, 39–48. Changsha, China: GeoHunan International Conference.
Zhou, C., B. Huang, X. Shu, and Q. Dong. 2013. “Validating MEPDG with Tennessee pavement performance data.” J. Transp. Eng. 139 (3): 306–312. https://doi.org/10.1061/(ASCE)TE.1943-5436.0000487.
Zhu, J., T. Ma, and Z. Dong. 2020a. “Evaluation of optimum mixing conditions for rubberized asphalt mixture containing reclaimed asphalt pavement.” Constr. Build. Mater. 234 (Feb): 117426. https://doi.org/10.1016/j.conbuildmat.2019.117426.
Zhu, X., Y. Sun, C. Du, W. Wang, J. Liu, and J. Chen. 2020b. “Rutting and fatigue performance evaluation of warm mix asphalt mastic containing high percentage of artificial RAP binder.” Constr. Build. Mater. 240 (Apr): 117860. https://doi.org/10.1016/j.conbuildmat.2019.117860.

Information & Authors

Information

Published In

Go to Journal of Materials in Civil Engineering
Journal of Materials in Civil Engineering
Volume 34Issue 8August 2022

History

Received: Sep 11, 2021
Accepted: Nov 30, 2021
Published online: May 18, 2022
Published in print: Aug 1, 2022
Discussion open until: Oct 18, 2022

Permissions

Request permissions for this article.

Authors

Affiliations

Ph.D. Student, School of Transportation and Logistics, Dalian Univ. of Technology, Dalian, 116024 Liaoning, China; School of Transportation, Southeast Univ., Nanjing, Jiangsu 214315, China. ORCID: https://orcid.org/0000-0002-6266-1547. Email: [email protected]
Associate Professor, School of Transportation and Logistics, Dalian Univ. of Technology, No. 2 Linggong St., Ganjingzi District, Dalian, 116024 Liaoning, China (corresponding author). ORCID: https://orcid.org/0000-0002-6685-8590. Email: [email protected]
Associate Professor, School of Transportation and Logistics, Dalian Univ. of Technology, Dalian, 116024 Liaoning, China. ORCID: https://orcid.org/0000-0003-3936-754X. Email: [email protected]

Metrics & Citations

Metrics

Citations

Download citation

If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.

Cited by

  • Impact of Waste Cooking Oil under Different Stages on Aged Asphalt-Mineral Interface Adhesion via Molecular Dynamics Simulations, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-17162, 36, 3, (2024).
  • Review on Performance of Asphalt and Asphalt Mixture with Waste Cooking Oil, Materials, 10.3390/ma16041341, 16, 4, (1341), (2023).
  • A laboratory investigation on benefits of WCO utilisation in asphalt with high recycled asphalt content: emphasis on rejuvenation and aging, International Journal of Pavement Engineering, 10.1080/10298436.2023.2172577, 24, 1, (2023).
  • Performance evaluation of waste cooking oil at different stages and rejuvenation effect of aged asphalt through molecular dynamics simulations and density functional theory calculations, Construction and Building Materials, 10.1016/j.conbuildmat.2022.128853, 350, (128853), (2022).

View Options

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Media

Figures

Other

Tables

Share

Share

Copy the content Link

Share with email

Email a colleague

Share