Low-Temperature and Fatigue Characteristics of Degraded Crumb Rubber–Modified Bitumen Before and After Aging
Publication: Journal of Materials in Civil Engineering
Volume 34, Issue 3
Abstract
The high viscosity and poor storage stability of crumb rubber–modified asphalt (CRMA) can be partially addressed by the appropriate degree of degradation of the crumb rubber modifier. However, the low-temperature and fatigue characteristics of degraded crumb rubber–modified bitumen (DCRMB) in different aging states are not well understood. In this study, two types of DCRMB—namely, terminal blend rubberized asphalt (TBRA) and terminal blend hybrid asphalt (TBHA)—were prepared with sulfur, styrene-butadiene-styrene (SBS) polymer, and crumb rubber (CR). All DCRMB binders were short-term aged with a rolling thin film oven test (RTFOT) and long-term aged with a pressure aging vessel (PAV). Afterward, a bending beam rheometer (BBR) test and a linear amplitude sweep (LAS) test were conducted to characterize the low-temperature and fatigue properties of DCRMB binders at different aging degrees, respectively. Based on the rheological test results, several conclusions can be drawn. First, the BBR results indicated that the increase in CR content led to a slight increase in creep rate and a significant decrease in stiffness. Especially in PAV aging, the low-temperature properties of DCRMB were much better than those of neat asphalt. Meanwhile, DCRMB demonstrated an advantage over neat asphalt in integrity and fatigue resistance before and after aging. Finally, based on correlation analysis, the LAS test is recommended for evaluating the fatigue properties of DCRMB before and after aging.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors appreciate financial support from the National Natural Science Foundation of China (Grant No. 51978518).
References
AASHTO. 2012. Standard method of test for estimating damage tolerance of asphalt binders using the linear amplitude sweep. AASHTO TP 101. Washington, DC: AASHTO.
AASHTO. 2014. Standard specification for performance-graded asphalt binder. AASHTO M 320-14. Washington, DC: AASHTO.
Akisetty, C. K., S. J. Lee, and S. N. Amirkhanian. 2009. “High temperature properties of rubberized binders containing warm asphalt additives.” Constr. Build. Mater. 23 (1): 565–573. https://doi.org/10.1016/j.conbuildmat.2007.10.010.
Ameri, M., A. Afshin, M. Ebrahimzadeh Shiraz, and F. Yazdipanah. 2020. “Effect of wax-based warm mix additives on fatigue and rutting performance of crumb rubber modified asphalt.” Constr. Build. Mater. 262 (Nov): 120882. https://doi.org/10.1016/j.conbuildmat.2020.120882.
Apeagyei, A. K. 2011. “Laboratory evaluation of antioxidants for asphalt binders.” Constr. Build. Mater. 25 (1): 47–53. https://doi.org/10.1016/j.conbuildmat.2010.06.058.
ASTM. 2001. Standard test method for determining the flexural creep stiffness of asphalt binder using the bending beam rheometer (BBR). ASTM D6648. West Conshohocken, PA: ASTM.
Bressi, S., N. Fiorentini, J. Huang, and M. Losa. 2019. “Crumb rubber modifier in road asphalt pavements: State of the art and statistics.” Coatings 9 (6): 384. https://doi.org/10.3390/coatings9060384.
Chamoun, Z., M. I. Souliman, E. Y. Hajj, and P. Sebaaly. 2015. “Evaluation of select warm mix additives with polymer and rubber modified asphalt mixtures.” Can. J. Civ. Eng. 42 (6): 377–388. https://doi.org/10.1139/cjce-2013-0512.
Chen, Z., T. Wang, J. Pei, S. Amirkhanian, F. Xiao, Q. Ye, and Z. Fan. 2019. “Low temperature and fatigue characteristics of treated crumb rubber modified asphalt after a long term aging procedure.” J. Cleaner Prod. 234 (Oct): 1262–1274. https://doi.org/10.1016/j.jclepro.2019.06.147.
Ghavibazoo, A., M. Abdelrahman, and M. Ragab. 2015. “Evaluation of oxidization of crumb rubber–modified asphalt during short-term aging.” Transp. Res. Rec. 2505 (1): 84–91. https://doi.org/10.3141/2505-11.
Hajj, E. Y., P. E. Sebaaly, E. Hitti, and C. Borroel. 2011. “Performance evaluation of terminal blend tire rubber HMA and WMA mixtures—Case studies.” J. Assoc. Asphalt Paving Technol. 80 (4): 665–696.
Han, L., M. Zheng, and C. Wang. 2016. “Current status and development of terminal blend tyre rubber modified asphalt.” Constr. Build. Mater. 128 (Dec): 399–409. https://doi.org/10.1016/j.conbuildmat.2016.10.080.
Huang, M., and W. Huang. 2016. “Laboratory investigation on fatigue performance of modified asphalt concretes considering healing.” Constr. Build. Mater. 113 (Jun): 68–76. https://doi.org/10.1016/j.conbuildmat.2016.02.083.
Huang, W., P. Lin, N. Tang, J. Hu, and F. Xiao. 2017. “Effect of crumb rubber degradation on components distribution and rheological properties of terminal blend rubberized asphalt binder.” Constr. Build. Mater. 151 (Oct): 897–906. https://doi.org/10.1016/j.conbuildmat.2017.03.229.
Kim, S., S. Loh, H. Zhai, and H. U. Bahia. 2001. “Advanced characterization of crumb rubber-modified asphalts, using protocols developed for complex binders.” Transp. Res. Rec. 1767 (1): 15–24. https://doi.org/10.3141/1767-03.
Lee, S. J., C. K. Akisetty, and S. N. Amirkhanian. 2008. “The effect of crumb rubber modifier (CRM) on the performance properties of rubberized binders in HMA pavements.” Constr. Build. Mater. 22 (7): 1368–1376. https://doi.org/10.1016/j.conbuildmat.2007.04.010.
Li, B., W. Huang, N. Tang, J. Hu, P. Lin, W. Guan, F. Xiao, and Z. Shan. 2017. “Evolution of components distribution and its effect on low temperature properties of terminal blend rubberized asphalt binder.” Constr. Build. Mater. 136 (Apr): 598–608. https://doi.org/10.1016/j.conbuildmat.2017.01.118.
Li, Q., G. Sun, Y. Lu, Y. Meng, S. Luo, and L. Gao. 2021. “Effects of warm-mix asphalt technologies and modifiers on pavement performance of recycled asphalt binders.” J. Cleaner Prod. 282 (Feb): 125435. https://doi.org/10.1016/j.jclepro.2020.125435.
Lin, P., W. Huang, Y. Li, N. Tang, and F. Xiao. 2017. “Investigation of influence factors on low temperature properties of SBS modified asphalt.” Constr. Build. Mater. 154 (Nov): 609–622. https://doi.org/10.1016/j.conbuildmat.2017.06.118.
Lin, P., W. Huang, N. Tang, F. Xiao, and Y. Li. 2018. “Understanding the low temperature properties of terminal blend hybrid asphalt through chemical and thermal analysis methods.” Constr. Build. Mater. 169 (Apr): 543–552. https://doi.org/10.1016/j.conbuildmat.2018.02.060.
Lo Presti, D. 2013. “Recycled tyre rubber modified bitumens for road asphalt mixtures: A literature review.” Constr. Build. Mater. 49 (Dec): 863–881. https://doi.org/10.1016/j.conbuildmat.2013.09.007.
Lv, Q., W. Huang, and F. Xiao. 2017a. “Laboratory evaluation of self-healing properties of various modified asphalts.” Constr. Build. Mater. 136 (Apr): 192–201. https://doi.org/10.1016/j.conbuildmat.2017.01.045.
Lv, Q., W. Huang, X. Zhu, and F. Xiao. 2017b. “On the investigation of self-healing behavior of bitumen and its influencing factors.” Mater. Des. 117 (Mar): 7–17. https://doi.org/10.1016/j.matdes.2016.12.072.
Norouzi, N., A. Ameli, and R. Babagoli. 2021. “Investigation of fatigue behaviour of warm modified binders and warm-stone matrix asphalt (WSMA) mixtures through binder and mixture tests.” Int. J. Pavement Eng. 22 (8): 1042–1051. https://doi.org/10.1080/10298436.2019.1659262.
Nuñez, J. Y. M., M. D. I. Domingos, and A. L. Faxina. 2014. “Susceptibility of low-density polyethylene and polyphosphoric acid–modified asphalt binders to rutting and fatigue cracking.” Constr. Build. Mater. 73 (Dec): 509–514. https://doi.org/10.1016/j.conbuildmat.2014.10.002.
Picado-Santos, L. G., S. D. Capitão, and J. M. C. Neves. 2020. “Crumb rubber asphalt mixtures: A literature review.” Constr. Build. Mater. 247 (Jun): 118577. https://doi.org/10.1016/j.conbuildmat.2020.118577.
Poulikakos, L. D., C. A. Falchetto, D. Wang, L. Porot, and B. Hofko. 2019. “Impact of asphalt aging temperature on chemo-mechanics.” RSC Adv. 9 (21): 11602–11613. https://doi.org/10.1039/C9RA00645A.
Singh, D., P. K. Ashish, A. Kataware, and A. Habal. 2017. “Evaluating performance of PPA-and-Elvaloy-modified binder containing WMA additives and lime using MSCR and LAS tests.” J. Mater. Civ. Eng. 29 (8): 04017064. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001934.
Tang, N., W. Huang, and F. Xiao. 2016. “Chemical and rheological investigation of high-cured crumb rubber-modified asphalt.” Constr. Build. Mater. 123 (Oct): 847–854. https://doi.org/10.1016/j.conbuildmat.2016.07.131.
Wang, D., A. Cannone Falchetto, L. Poulikakos, B. Hofko, and L. Porot. 2019a. “RILEM TC 252-CMB report: Rheological modeling of asphalt binder under different short- and long-term aging temperatures.” Mater. Struct. 52 (4): 1–12. https://doi.org/10.1617/s11527-019-1371-8.
Wang, D., A. Cannone Falchetto, C. Riccardi, J. Westerhoff, and M. P. Wistuba. 2021a. “Investigation on the effect of physical hardening and aging temperature on low-temperature rheological properties of asphalt binder.” Road Mater. Pavement Des. 22 (5): 1117–1139. https://doi.org/10.1080/14680629.2019.1665089.
Wang, D., A. C. Falchetto, C. Riccardi, L. Poulikakos, B. Hofko, L. Porot, M. P. Wistuba, H. Baaj, P. Mikhailenko, and K. H. Moon. 2019b. “Investigation on the combined effect of aging temperatures and cooling medium on rheological properties of asphalt binder based on DSR and BBR.” Supplement, Road Mater. Pavement Des. 20 (S1): S409–S433. https://doi.org/10.1080/14680629.2019.1589559.
Wang, S., and W. Huang. 2021. “Investigation of aging behavior of terminal blend rubberized asphalt with SBS polymer.” Constr. Build. Mater. 267 (Jan): 120870. https://doi.org/10.1016/j.conbuildmat.2020.120870.
Wang, S., W. Huang, and A. Kang. 2021b. “Evaluation of aging characteristics of high-viscosity asphalt: Rheological properties, rutting resistance, temperature sensitivity, homogeneity, and chemical composition.” J. Mater. Civ. Eng. 33 (7): 04021149. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003777.
Wang, S., W. Huang, Q. Lv, C. Yan, P. Lin, and M. Zheng. 2020. “Influence of different high viscosity modifiers on the aging behaviors of SBSMA.” Constr. Build. Mater. 253 (8): 119214. https://doi.org/10.1016/j.conbuildmat.2020.119214.
Wang, T., F. Xiao, S. Amirkhanian, W. Huang, and M. Zheng. 2017. “A review on low temperature performances of rubberized asphalt materials.” Constr. Build. Mater. 145 (Aug): 483–505. https://doi.org/10.1016/j.conbuildmat.2017.04.031.
Wen, G., Y. Zhang, Y. Zhang, K. Sun, and Z. Chen. 2001. “Vulcanization characteristics of asphalt/SBS blends in the presence of sulfur.” J. Appl. Polym. Sci. 82 (4): 989–996. https://doi.org/10.1002/app.1932.
Wen, G., Y. Zhang, Y. Zhang, K. Sun, and Y. Fan. 2002. “Improved properties of SBS-modified asphalt with dynamic vulcanization.” Polym. Eng. Sci. 42 (5): 1070–1081. https://doi.org/10.1002/pen.11013.
Wen, Y., Y. Wang, K. Zhao, D. Chong, W. Huang, G. Hao, and S. Mo. 2018. “The engineering, economic, and environmental performance of terminal blend rubberized asphalt binders with wax-based warm mix additives.” J. Cleaner Prod. 184 (May): 985–1001. https://doi.org/10.1016/j.jclepro.2018.03.011.
Yu, X., Y. Wang, and Y. Luo. 2013. “Impacts of water content on rheological properties and performance-related behaviors of foamed warm-mix asphalt.” Constr. Build. Mater. 48 (Nov): 203–209. https://doi.org/10.1016/j.conbuildmat.2013.06.018.
Zeng, W., S. Wu, L. Pang, H. Chen, J. Hu, Y. Sun, and Z. Chen. 2018. “Research on ultraviolet (UV) aging depth of asphalts.” Constr. Build. Mater. 160 (Jan): 620–627. https://doi.org/10.1016/j.conbuildmat.2017.11.047.
Zhao, M., S. Xu, Z. Zhao, J. Yu, and S. Wu. 2016. “Physical and UV aging resistance properties of asphalts modified by UV absorbent composited and intercalated layered double hydroxides.” J. Nanosci. Nanotechnol. 16 (12): 12714–12719. https://doi.org/10.1166/jnn.2016.13655.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: May 10, 2021
Accepted: Jul 30, 2021
Published online: Dec 30, 2021
Published in print: Mar 1, 2022
Discussion open until: May 30, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Shifa Xu, Xiaoyu Ren, Hongliang Wu, Hongzhe Liu, Meng Xu, Zixiao Zhu, Meng Ling, Effect of Ultraviolet Aging on Fundamental Properties of Polymer and Crumb Rubber Modified Asphalt and Asphalt Mixtures, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-17039, 36, 5, (2024).
- Lan Wang, Wei Wang, Hanfeng Guan, Yaxin Li, Ke Pei, Baiyinshuang Chen, Effect of Salt Freeze–Thaw Cycle on Crack Resistance of Steel Slag Rubber Powder Modified Asphalt Mixture, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-16563, 36, 3, (2024).
- Sarah Mariam Abraham, Muskan Verma, Vijay Kakade, Aging Resistance of Bitumen Modifiers: A Comprehensive Review, Journal of Testing and Evaluation, 10.1520/JTE20220456, 51, 5, (20220456), (2023).
- Burak Yiğit Katanalp, Perviz Ahmedzade, Rheological Evaluation and Life Cycle Cost Analysis of the Geopolymer Produced from Waste Ferrochrome Electric Arc Furnace Fume as a Composite Component in Bitumen Modification, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-15906, 35, 11, (2023).
- Sheng Wang, Weidong Huang, Xueyan Liu, Peng Lin, Influence of SBS on the Aging Properties of High-Content Terminal Blend Rubber Modified Asphalt, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-15506, 35, 8, (2023).
- Sheng Wang, Weidong Huang, Xueyan Liu, Peng Lin, Aging Characteristics of Rubber Modified Bitumen Mixed with Sulfur after Terminal Blend Process, Sustainability, 10.3390/su14052612, 14, 5, (2612), (2022).
- Lu Zhang, Chuanping Zhang, Zhen Zhang, Hanbing Wang, Shifeng Wang, Characterization, Properties and Mixing Mechanism of Rubber Asphalt Colloid for Sustainable Infrastructure, Polymers, 10.3390/polym14204429, 14, 20, (4429), (2022).
- Yanlei Wang, Hongyu Yi, Pengfei Liang, Chongchong Chai, Chuanqi Yan, Shengxiong Zhou, Investigation on Preparation Method of SBS-Modified Asphalt Based on MSCR, LAS, and Fluorescence Microscopy, Applied Sciences, 10.3390/app12147304, 12, 14, (7304), (2022).
- Sheng Wang, Weidong Huang, Xueyan Liu, Peng Lin, Shisong Ren, Yi Li, Effect of High Content of Waste Tire Rubber and Sulfur on the Aging Behavior of Bitumen, Applied Sciences, 10.3390/app12115417, 12, 11, (5417), (2022).