Evaluation of Performance Deterioration Characteristics of Asphalt Mixture in Corrosion Environment Formed by Snow-Melting Agents
Publication: Journal of Materials in Civil Engineering
Volume 34, Issue 3
Abstract
To simulate the influence of the corrosion environment caused by snow-melting agent on pavement, an asphalt mixture was treated by dry-wet cycle in a NaCl solution with various concentrations. The rutting test, bending test, freeze-thaw splitting test, immersion Hamburg wheel-track test, industrial computed tomography (ICT) test, and scanning electron microscope (SEM) test were conducted to evaluate the adverse effect of snow-melting agent on road performance, durability, and the microstructural characteristics of SMA13, AC13, and SUP13 asphalt mixtures. The damage mechanism of performance for asphalt mixtures in a corrosion environment was also discussed. The results show that the road performance and durability of SMA13, SUP13, and AC13 asphalt mixtures decrease by various extents after being treated by the method of dry-wet cycle in chloride salt solution. Among the three kinds of asphalt mixture, SMA13 shows the best resistance to the corrosion of NaCl solution, followed by SUP13 and AC13. After being treated in salt solution, the void parameters such as total void volume, average void volume, equivalent void diameter, and air void of a Marshall specimen grow fast first and then tend to stabilize. The crystallization expansion of NaCl crystals results in structural damage inside the mixture, and then the strength of the asphalt mixture greatly declines, leading to the deterioration of road performance and durability in a salt corrosion environment. SMA13 asphalt mixture is recommended for pavement surface layers where the snow-melting agent is often used.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
The study is supported by the Provincial Natural Science Foundation of Anhui (1908085QE217 and 1908085MF207), the Quality Engineering Project of Colleges and Universities in Anhui Province (2019sxzx29 and 202013619001), the Key Project of the Natural Science Research of Anhui Provincial Department of Education (KJ2020A1214), the Quality Engineering Project of Fuyang Normal University (College of Information Engineering) (2018FXJS01, 2020FXJY02, and 2020JXCGJ03), the Henan Provincial Department of Science and Technology Research Project (212102310459), the Open Fund of National Engineering Laboratory of Highway Maintenance Technology (Changsha University of Science and Technology) (kfj180108), the Science and Technology Project of Henan Province (202102310589), the Shandong Provincial Natural Science Foundation (ZR2020QE274), the Key Research and Development Program of Shandong Province (Soft Science Project) (2020RKB01602), and the Science and Technology Plan of Shandong Transportation Department (2020B93). The authors gratefully acknowledge their financial support.
References
AASHTO. 2013. Standard specification for Superpave volumetric mix design. AASHTO M 323. Washington, DC: AASHTO.
AASHTO. 2019. Standard method of test for Hamburg wheel-track testing of compacted hot mix asphalt (HMA). AASHTO T 324. Washington, DC: AASHTO.
Amini, B., and S. S. Tehrani. 2014. “Simultaneous effects of salted water and water flow on asphalt concrete pavement deterioration under freeze-thaw cycles.” Int. J. Pavement Res. Technol. 15 (5): 383–391. https://doi.org/10.1080/10298436.2012.677844.
An, H. C., R. F. Yang, and W. Yuan. 2018. “Effect of production process parameters on high temperature stability of rubber asphalt mixture.” Indian J. Eng. Mater. Sci. 25 (6): 498–506.
ASTM. 2000. Standard specification for type I polymer modified asphalt cement for use in pavement construction. ASTM D5976. West Conshohocken, PA: ASTM.
ASTM. 2014. Standard test method for softening point of bitumen (ring-and-ball apparatus). ASTM D36. West Conshohocken, PA: ASTM.
ASTM. 2015a. Standard test method for solubility of asphalt materials in trichloroethylene. ASTM D2042. West Conshohocken, PA: ASTM.
ASTM. 2015b. Standard test method for viscosity determination of asphalt at elevated temperatures using a rotational viscometer. ASTM D4402. West Conshohocken, PA: ASTM.
ASTM. 2017. Standard test method for ductility of asphalt materials. ASTM D113. West Conshohocken, PA: ASTM.
ASTM. 2020a. Standard test method for ductility of asphalt materials. ASTM D5. West Conshohocken, PA: ASTM.
ASTM. 2020b. Standard test method for effects of heat and air on asphaltic materials (thin-film oven test). ASTM D1754. West Conshohocken, PA: ASTM.
Chang, R., and P. W. Hao. 2017. “Impact of freeze-thaw cycles with salt on low temperature properties of asphalt mixture.” J. Build. Mater. 20 (3): 481–488.
Chu, C., K. P. Liu, K. H. Li, L. D. Li, N. Qiao, W. Y. Jiang, N. J. Lei, and R. Xiong. 2018. “Investigation on the road performance of asphalt mixture exposed to salt erosion.” Bull. Chin. Ceram. Soc. 37 (12): 3906–3911.
Fakhri, M., S. Javadi, R. Sedghi, D. Arzjani, and Y. Zarrinpour. 2019. “Effects of deicing agents on moisture susceptibility of the WMA containing recycled crumb rubber.” Constr. Build. Mater. 227 (Dec): 116581. https://doi.org/10.1016/j.conbuildmat.2019.07.307.
Feng, D. C., J. Y. Yi, D. S. Wang, and L. L. Chen. 2010. “Impact of salt and freeze-thaw cycles on performance of asphalt mixtures in coastal frozen region of China.” Cold Reg. Sci. Technol. 62 (1): 34–41. https://doi.org/10.1016/j.coldregions.2010.02.002.
Goh, S. W., M. Akin, and Z. P. You. 2011. “Effect of deicing solutions on the tensile strength of micro- or nano-modified asphalt mixture.” Constr. Build. Mater. 25 (1): 195–200. https://doi.org/10.1016/j.conbuildmat.2010.06.038.
Guo, Q. L., G. Y. Li, Y. Gao, K. Y. Wang, Z. Z. Dong, F. C. Liu, and H. Zhu. 2019. “Experimental investigation on bonding property of asphalt-aggregate interface under the actions of salt immersion and freeze-thaw cycles.” Constr. Build. Mater. 206 (May): 590–599. https://doi.org/10.1016/j.conbuildmat.2019.02.094.
Hassan, Y., A. O. A. E. Halim, A. G. Razaqpur, W. Bekheet, and M. Farha. 2002. “Effects of runway deicers on pavement materials and mixes: Comparison with road salt.” J. Transp. Eng. 128 (4): 385–391. https://doi.org/10.1061/(ASCE)0733-947X(2002)128:4(385).
Huang, X. Y., A. M. Sha, and W. Jiang. 2017. “Effect and mechanism of salt erosion on performance of bitumen and asphalt mixtures.” J. Chang’an Univ. (Nat. Sci. Edi.) 37 (3): 33–38.
Juli-Gandara, L., A. Vega-Zamanillo, and M. A. Calzada-Perez. 2019. “Sodium chloride effect in the mechanical properties of the bituminous mixtures.” Cold Reg. Sci. Technol. 164 (Aug): 102776. https://doi.org/10.1016/j.coldregions.2019.05.002.
Li, N., X. W. Wang, R. J. Qiao, B. Ma, Z. S. Shao, W. Sun, and H. Wang. 2020a. “A prediction model of permanent strain of unbound gravel materials based on performance of single-size gravels under repeated loads.” Constr. Build. Mater. 246 (Jun): 118492. https://doi.org/10.1016/j.conbuildmat.2020.118492.
Li, P. L., J. F. Su, S. S. Ma, and H. Dong. 2020b. “Effect of aggregate contact condition on skeleton stability in asphalt mixture.” Int. J. Pavement Eng. 21 (2): 196–202. https://doi.org/10.1080/10298436.2018.1450503.
Liu, Z. Z., S. F. Chen, R. He, M. L. Xing, Y. J. Bai, and H. B. Dou. 2015. “Investigation on the properties of asphalt mixtures containing antifreeze fillers.” J. Mater. Civ. Eng. 27 (6): 04014180. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001082.
Luo, Y. F., Z. Q. Zhang, G. L. Cheng, and K. Zhang. 2017. “The deterioration and performance improvement of long-term mechanical properties of warm-mix asphalt mixtures under special environmental conditions.” Constr. Build. Mater. 135 (Mar): 622–631. https://doi.org/10.1016/j.conbuildmat.2016.12.167.
Ma, T., L. Geng, X. H. Ding, D. Y. Zhang, and X. M. Huang. 2016. “Experimental study of deicing asphalt mixture with anti-icing additives.” Constr. Build. Mater. 127 (Nov): 653–662. https://doi.org/10.1016/j.conbuildmat.2016.10.018.
Ministry of Transport of the People’s Republic of China. 2004. Technical specification for construction of highway asphalt pavements. JTG F40. Beijing: Ministry of Transport of the People’s Republic of China.
Ministry of Transport of the People’s Republic of China. 2011. Standard test methods of bitumen and bituminous mixtures for highway engineering. JTG E20. Beijing: Ministry of Transport of the People’s Republic of China.
Özgan, E., S. Serin, H. Gerengi, and I. Arslana. 2013. “Multi-faceted investigation of the effect of deicer chemicals on the engineering properties of asphalt concrete.” Cold Reg. Sci. Technol. 87 (1): 59–67. https://doi.org/10.1016/j.coldregions.2012.11.003.
Pan, P., S. P. Wu, Y. Xiao, and G. Liu. 2015. “A review on hydronic asphalt pavement for energy harvesting and snow melting.” Renewable Sustainable Energy Rev. 48 (Aug): 624–634. https://doi.org/10.1016/j.rser.2015.04.029.
Peng, C., J. Y. Yu, Z. J. Zhao, J. Dai, J. Y. Fu, and W. Wang. 2016. “Effects of a sodium chloride deicing additive on the rheological properties of asphalt mastic.” Road Mater. Pavement Des. 17 (2): 382–395. https://doi.org/10.1080/14680629.2015.1083881.
Setiadji, B. H., and S. Utomo. 2017. “Effect of chemical compounds in tidal water on asphalt pavement mixture.” Int. J. Pavement Res. Technol. 10 (2): 122–130. https://doi.org/10.1016/j.ijprt.2016.11.002.
Shi, X. M., S. W. Goh, M. Akin, S. Stevens, and Z. P. You. 2012. “Exploring the interactions of chloride deicer solutions with nanomodified and micromodified asphalt mixtures using artificial neural networks.” J. Mater. Civ. Eng. 24 (7): 805–815. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000452.
Wang, L., N. N. Gong, and Y. M. Xing. 2016. “Researching the influence factors of asphalt mixture performance under the damage of deicing salt and freezing-thawing cycles.” J. Funct. Mater. 47 (4): 4088–4093.
Xiong, R., C. Chu, N. Qiao, L. Wang, F. Yang, Y. P. Sheng, B. W. Guan, D. Y. Niu, J. G. Geng, and H. X. Chen. 2019a. “Performance evaluation of asphalt mixture exposed to dynamic water and chlorine salt erosion.” Constr. Build. Mater. 201 (Mar): 121–126. https://doi.org/10.1016/j.conbuildmat.2018.12.190.
Xiong, R., W. Y. Jiang, K. H. Li, Y. J. Zong, C. Li, and F. Yang. 2020. “Damage evaluation of asphalt mixture performance under chloride salt erosion.” Appl. Chem. Ind. 49 (3): 545–549.
Xiong, R., W. Y. Jiang, F. Yang, K. H. Li, B. W. Guan, and H. Zhao. 2019b. “Investigation of voids characteristics in an asphalt mixture exposed to salt erosion based on CT images.” Materials (Basel) 12 (22): 3774. https://doi.org/10.3390/ma12223774.
Xiong, R., N. Qiao, F. Yang, C. Chu, L. D. Li, J. Y. Wu, W. Y. Jiang, K. H. Li, and H. X. Chen. 2019c. “Performance damage characteristics of asphalt binder suffered from the action of sulfate.” Adv. Mater. Sci. Eng. 2019 (Apr): 5465687. https://doi.org/10.1155/2019/5465687.
Xu, G., Y. H. Yu, D. G. Cai, G. Y. Xie, X. H. Chen, and J. Yang. 2020. “Multi-scale damage characterization of asphalt mixture subject to freeze-thaw cycles.” Constr. Build. Mater. 240 (Apr): 117947. https://doi.org/10.1016/j.conbuildmat.2019.117947.
Xu, H. N., W. Guo, and Y. Q. Tan. 2015. “Internal structure evolution of asphalt mixtures during freeze-thaw cycles.” Mater. Des. 86 (Dec): 436–446. https://doi.org/10.1016/j.matdes.2015.07.073.
Yang, Z. X., Y. Zhang, and X. M. Shi. 2018. “Impact of nanoclay and carbon microfiber in combating the deterioration of asphalt concrete by non-chloride deicers.” Constr. Build. Mater. 160 (Jan): 514–525. https://doi.org/10.1016/j.conbuildmat.2017.11.059.
Zhang, K., W. L. Li, and F. F. Han. 2019a. “Performance deterioration mechanism and improvement techniques of asphalt mixture in salty and humid environment.” Constr. Build. Mater. 208 (May): 749–757. https://doi.org/10.1016/j.conbuildmat.2019.03.061.
Zhang, K., Y. F. Luo, Y. Z. Wang, W. L. Li, and G. Yu. 2019b. “Material optimization and optimum asphalt content design of asphalt mixture in salty and humid environment.” Constr. Build. Mater. 196 (Jan): 703–713. https://doi.org/10.1016/j.conbuildmat.2018.11.158.
Zhang, K., Y. F. Luo, W. Xie, and J. J. Wu. 2020. “Evaluation of road performance and adhesive characteristic of asphalt binder in salt erosion environment.” Mater. Today Commun. 25 (Dec): 101593. https://doi.org/10.1016/j.mtcomm.2020.101593.
Zhang, K., and Z. Q. Zhang. 2014. “Influence of salty and humid environment on asphalt mixture performance and microstructure.” J. Wuhan Univ. Technol. 36 (9): 48–53.
Zhang, Q. L., and Z. Y. Huang. 2019. “Investigation of the microcharacteristics of asphalt mastics under dry-wet and freeze-thaw cycles in a coastal salt environment.” Materials (Basel) 12 (16): 2627. https://doi.org/10.3390/ma12162627.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Jan 16, 2021
Accepted: Jul 22, 2021
Published online: Dec 24, 2021
Published in print: Mar 1, 2022
Discussion open until: May 24, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Enyong Sun, Yanqing Zhao, Guozhong Wang, Chloride Salt Erosion of Asphalt Based on Adhesion, Surface Characteristics, and Microsurface Energy, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-18186, 36, 9, (2024).
- Pengfei Li, Jingyang Yu, Hailin Sun, Zhiqing Zhang, Evaluation of Snow Melting and Anti-Freeze Performance of Salt Storage Asphalt Mixture, International Conference on Road and Airfield Pavement Technology 2023, 10.1061/9780784485255.050, (607-618), (2024).
- Chao Hu, Zhigang Zhou, Yaoyao Luo, Relationship between Microstructure and Macroscopic Properties of Asphalt under Different Concentrations of Snow Melting Agent, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-15125, 35, 11, (2023).
- Mengting Zhao, Jun Long, Henglong Zhang, Zihao Chen, Performance evaluation of temperature-regulating asphalt mixture with thermochromic materials and low freezing point materials, Construction and Building Materials, 10.1016/j.conbuildmat.2022.129873, 364, (129873), (2023).
- Haihu Zhang, Runhua Guo, Investigation of Long-Term Performance and Deicing Longevity Prediction of Self-Ice-Melting Asphalt Pavement, Materials, 10.3390/ma15176026, 15, 17, (6026), (2022).