Assessment on Steel Slag–Based SMA-5 and AC-5 Asphalt Mixtures for Maintenance and Induction Heating
Publication: Journal of Materials in Civil Engineering
Volume 34, Issue 3
Abstract
Maintenance and the deicing of pavement are of significance for pavement service life and safety. This study designed asphalt cement (AC)-5 and stone matrix asphalt (SMA)-5 asphalt mixtures with steel fiber and steel slag, which are the materials of a functional ultrathin friction course. It is expected to be used for the maintenance and induction heating on asphalt pavement. Mechanical performance, such as skid resistance, interface shear resistance, semicircular bending (SCB), and corresponding fatigue tests, were investigated. In addition, the induction heating efficiency conducted at different distances was tested as well. The results show that SMA-5 showed better skid resistance than AC-5. Steel fiber raised the interface shear strength of AC-5 but reduced that of SMA-5. Fracture displacements of SMA-5 at the interface were lower than that of AC-5. Steel fiber-enhanced cracking resistance of SMA-5, while steel slag showed a negative effect. Fatigue properties of basalt-based SMA-5 showed a rising trend along with the increasing steel fiber. The distance between the mixture and magnetic coil showed a negative effect on induction heating efficiency.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
The authors are grateful for the financial support from the National Key R&D Program of China (No. 2018YFB1600200), the Technological Innovation Major Project of Hubei Province (2019AEE023), the Technology Project of the Department of Transportation of Hubei Province (Nos. 2017-538-1-10 and 2018-422-1-17), and the Scientific Research Starting Foundation of Wuhan Institute of Technology (No. K202021).
References
AASHTO. 2005. Standard specification for stone matrix asphalt. AASHTO MP 8-2005. Washington, DC: AASHTO.
Asfour, S., F. Bernardin, E. Toussaint, and J. M. Piau. 2016. “Hydrothermal modeling of porous pavement for its surface de-freezing.” Appl. Therm. Eng. 107 (Aug): 493–500. https://doi.org/10.1016/j.applthermaleng.2016.06.138.
Bažant, Z. P., and E. Becq-Giraudon. 2002. “Statistical prediction of fracture parameters of concrete and implications for choice of testing standard.” Cem. Concr. Res. 32 (4): 529–556. https://doi.org/10.1016/S0008-8846(01)00723-2.
Chang, X., R. Zhang, Y. Xiao, X. Chen, and G. Liu. 2020. “Mapping of publications on asphalt pavement and bitumen materials: A bibliometric review.” Constr. Build. Mater. 234 (Feb): 117370. https://doi.org/10.1016/j.conbuildmat.2019.117370.
Charmot, S., A. Braham, and K. Zheng. 2013. “Effect of emulsion content and cement loading on cold recycling mixture fracture energy measured using semicircular bending fracture test.” In Proc., Transportation Research Board 92nd Annual Meeting. Washington, DC: Transportation Research Board.
Chen, F., M. Z. Chen, S. P. Wu, and J. Z. Zhang. 2012. “Research on pavement performance of steel slag conductive asphalt concrete for deicing and snow melting.” Key Eng. Mater. 509 (Apr): 168–174. https://doi.org/10.4028/www.scientific.net/KEM.509.168.
Chen, J. S., and S. H. Wei. 2016. “Engineering properties and performance of asphalt mixtures incorporating steel slag.” Constr. Build. Mater. 128 (Dec): 148–153. https://doi.org/10.1016/j.conbuildmat.2016.10.027.
Chen, Z., S. Wu, Y. Xiao, W. Zeng, M. Yi, and J. Wan. 2016. “Effect of hydration and silicone resin on basic oxygen furnace slag and its asphalt mixture.” J. Cleaner Prod. 112 (Jan): 392–400. https://doi.org/10.1016/j.jclepro.2015.09.041.
Chootinan, P., A. Chen, M. R. Horrocks, and D. Bolling. 2006. “A multi-year pavement maintenance program using a stochastic simulation-based genetic algorithm approach.” Transp. Res. Part A Policy Pract. 40 (9): 725–743. https://doi.org/10.1016/j.tra.2005.12.003.
Collop, A. C., N. H. Thom, and C. Sangiorgi. 2003. “Assessment of bond condition using the Leutner shear test.” Proc. Inst. Civ. Eng. Transp. 156 (4): 211–217. https://doi.org/10.1680/tran.2003.156.4.211.
Cui, P., S. Wu, Y. Xiao, R. Hu, and T. Yang. 2021a. “Environmental performance and functional analysis of chip seals with recycled basic oxygen furnace slag as aggregate.” J. Hazard. Mater. 405 (Mar): 124441. https://doi.org/10.1016/j.jhazmat.2020.124441.
Cui, P., S. Wu, Y. Xiao, Q. Liu, and F. Wang. 2021b. “Hazardous characteristics and variation in internal structure by hydrodynamic damage of BOF slag-based thin asphalt overlay.” J. Hazard. Mater. 412 (Jun): 125344. https://doi.org/10.1016/j.jhazmat.2021.125344.
Cui, P., S. Wu, Y. Xiao, M. Wan, and P. Cui. 2015. “Inhibiting effect of layered double hydroxides on the emissions of volatile organic compounds from bituminous materials.” J. Cleaner Prod. 108 (12): 987–991. https://doi.org/10.1016/j.jclepro.2015.06.115.
Gao, J., A. Sha, Z. Wang, Z. Tong, and Z. Liu. 2017. “Utilization of steel slag as aggregate in asphalt mixtures for microwave deicing.” J. Cleaner Prod. 152 (May): 429–442. https://doi.org/10.1016/j.jclepro.2017.03.113.
Li, H., J. Yu, S. Wu, Q. Liu, B. Li, Y. Li, and Y. Wu. 2019. “Study on the gradient heating and healing behaviors of asphalt concrete induced by induction heating.” Constr. Build. Mater. 208 (May): 638–645. https://doi.org/10.1016/j.conbuildmat.2019.03.052.
Li, X., and M. Marasteanu. 2004. “Evaluation of the low temperature fracture resistance of asphalt mixtures using the semi circular bend test.” In Vol. 73 of Proc., Asphalt Paving Technology: Association of Asphalt Paving Technologists—Proc., Technical Sessions, 401–426. St. Paul, MN: Association of Asphalt Paving Technologists.
Lim, I. L., I. W. Johnston, and S. K. Choi. 1993. “Stress intensity factors for semi-circular specimens under three-point bending.” Eng. Fract. Mech. 44 (3): 363–382. https://doi.org/10.1016/0013-7944(93)90030-V.
Liu, Q., E. Schlangen, Á. García, and M. V. D. Ven. 2010. “Induction heating of electrically conductive porous asphalt concrete.” Constr. Build. Mater. 24 (7): 1207–1213. https://doi.org/10.1016/j.conbuildmat.2009.12.019.
Luo, S., and X. Yang. 2015. “Performance evaluation of high-elastic asphalt mixture containing deicing agent Mafilon.” Constr. Build. Mater. 94 (Sep): 494–501. https://doi.org/10.1016/j.conbuildmat.2015.07.064.
Ma, T., L. Geng, X. Ding, D. Zhang, and X. Huang. 2016. “Experimental study of deicing asphalt mixture with anti-icing additives.” Constr. Build. Mater. 127 (Nov): 653–662. https://doi.org/10.1016/j.conbuildmat.2016.10.018.
Ministry of Transport of PRC (People’s Republic of China). 2004. Technical specifications for construction of highway asphalt pavements. JTG F40-2004. Beijing: Ministry of Transport of PRC.
Motz, H., and J. Geiseler. 2001. “Products of steel slags an opportunity to save natural resources.” Waste Manage. 21 (3): 285–293. https://doi.org/10.1016/S0956-053X(00)00102-1.
Nan, X. F., and Z. F. Tian. 2009. “Experimental research on ultra thin friction course interlayer bonding strength.” Int. J. Pavement Res. Technol. 2 (4): 176–180.
Pan, P., S. Wu, Y. Xiao, and G. Liu. 2015. “A review on hydronic asphalt pavement for energy harvesting and snow melting.” Renewable Sustainable Energy Rev. 48 (Aug): 624–634. https://doi.org/10.1016/j.rser.2015.04.029.
Peng, C., J. Yu, Z. Zhao, J. Fu, M. Zhao, W. Wang, and J. Dai. 2015. “Preparation and properties of a layered double hydroxide deicing additive for asphalt mixture.” Cold Reg. Sci. Technol. 110 (Feb): 70–76. https://doi.org/10.1016/j.coldregions.2014.11.013.
Riara, M., P. Tang, L. Mo, W. Hong, M. Chen, and S. Wu. 2018a. “Evaluation of moisture and temperature effect on crack healing of asphalt mortar and mixtures using healing agents.” Constr. Build. Mater. 177 (Jul): 388–394. https://doi.org/10.1016/j.conbuildmat.2018.05.020.
Riara, M., P. Tang, L. Mo, B. Javilla, and S. Wu. 2018b. “Investigation into crack healing of asphalt mixtures using healing agents.” Constr. Build. Mater. 161 (Feb): 45–52. https://doi.org/10.1016/j.conbuildmat.2017.11.074.
Sun, Y., S. Wu, Q. Liu, and Y. Xiao. 2015. “Promoting the dispersion of LDHs powder in bitumen with pre-dispersion and microwave heating.” Constr. Build. Mater. 93 (Sep): 416–426. https://doi.org/10.1016/j.conbuildmat.2015.06.012.
Tao, G., Y. Xiao, L. Yang, P. Cui, D. Z. Kong, and Y. Xue. 2019. “Characteristics of steel slag filler and its influence on rheological properties of asphalt mortar.” Constr. Build. Mater. 201 (Mar): 439–446. https://doi.org/10.1016/j.conbuildmat.2018.12.174.
Tsai, W. T., M. K. Lee, and Y. M. Chang. 2006. “Fast pyrolysis of rice straw, sugarcane bagasse and coconut shell in an induction-heating reactor.” J. Anal. Appl. Pyrolysis 76 (1): 230–237. https://doi.org/10.1016/j.jaap.2005.11.007.
Wan, J., S. Wu, Y. Xiao, S. Amirkhanian, G. Liu, J. Hu, and D. Zhang. 2018. “Using interface shear characteristics to evaluate the residual performance of asphalt pavements.” J. Adhes. Sci. Technol. 32 (18): 2070–2082. https://doi.org/10.1080/01694243.2018.1462948.
Wang, Z., J. Gao, T. Ai, and P. Zhao. 2014. “Laboratory investigation on microwave deicing function of micro surfacing asphalt mixtures reinforced by carbon fiber.” J. Test. Eval. 42 (2): 498–507. https://doi.org/10.1520/JTE20130118.
Xiao, Y. 2013. “Towards a performance evaluation method for durable and sustainable thin surfacings.” Ph.D. thesis, Faculty of Civil Engineering and Geosciences, Delft Univ. of Technology.
Xue, Y., X. Wei, H. Zhao, T. Wang, and Y. Xiao. 2020. “Interaction of spent FCC catalyst and asphalt binder: Rheological properties, emission of VOCs and immobilization of metals.” J. Cleaner Prod. 259 (Jun): 120830. https://doi.org/10.1016/j.jclepro.2020.120830.
Xue, Y., S. Wu, H. Hou, and J. Zha. 2006. “Experimental investigation of basic oxygen furnace slag used as aggregate in asphalt mixture.” J. Hazard. Mater. 138 (2): 261–268. https://doi.org/10.1016/j.jhazmat.2006.02.073.
Yildirim, I. Z., and M. Prezzi. 2011. “Chemical, mineralogical, and morphological properties of steel slag.” Adv. Civ. Eng. 2011: 1–13. https://doi.org/10.1155/2011/463638.
Yüksel, İ. 2017. “A review of steel slag usage in construction industry for sustainable development.” Environ. Dev. Sustainability 19 (2): 369–384. https://doi.org/10.1007/s10668-016-9759-x.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Feb 9, 2021
Accepted: Jul 12, 2021
Published online: Dec 22, 2021
Published in print: Mar 1, 2022
Discussion open until: May 22, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Chongfu Cao, Xiaodi Hu, Jiuming Wan, Shaopeng Wu, Wenxia Gan, Yinglong Zhang, Enhanced Thermal Insulation of Steel Slag Based on Ultrathin Friction Course with Ceramic Fiber, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-15983, 35, 10, (2023).
- Junyan Wang, Xin Yu, Gongying Ding, Jingjing Si, Mingzhen Zhang, Ziqi Jiang, Dynamic Mechanical Behavior of Cold-Mixed Epoxy Asphalt under High Strain Rates, Journal of Materials in Civil Engineering, 10.1061/(ASCE)MT.1943-5533.0004724, 35, 5, (2023).
- Peide Cui, Tao Ma, Shaopeng Wu, Guangji Xu, Fusong Wang, Texture characteristic and its enhancement mechanism in stone mastic asphalt incorporating steel slag, Construction and Building Materials, 10.1016/j.conbuildmat.2023.130440, 369, (130440), (2023).
- Ruiyang Jian, Xiaodi Hu, Tao Han, Jiuming Wan, Wenxia Gan, Zongwu Chen, Yinglong Zhang, Chongfu Cao, Optimization of induction heating parameters for improving Self-healing performance of asphalt mixture through partial least square model, Construction and Building Materials, 10.1016/j.conbuildmat.2022.130019, 365, (130019), (2023).
- Kai Liu, JianHang Tong, Chaoliang Fu, Peixin Xu, Fang Wang, Huanping Pang, Calculative method of effective induction heating depth and its influences on induction healing of dense-graded asphalt pavement, Construction and Building Materials, 10.1016/j.conbuildmat.2022.129388, 359, (129388), (2022).