Production of Environmentally Friendly Concrete Incorporating Bauxite Residue and Silica Fume
Publication: Journal of Materials in Civil Engineering
Volume 34, Issue 2
Abstract
Toward a sustainable approach, concrete consumption is confronted with new challenges to developing and implementing cleaner technology. Concrete production is associated with excessive use of natural resources along with environmental pollution, which can be partially addressed through cement replacement with industrial waste. Red mud (RM), a toxic by-product of alumina refineries, is a potential supplementary cementitious material that has attracted researchers’ attention in the last years. In this study, 10 mixes were prepared and tested to investigate the simultaneous application of RM (10%, 15%, and 20%) and silica fume (SF) (5% and 7.5%) as cement replacement on concrete properties. The properties of fresh and hardened concrete and its durability were investigated. Overall, the mechanical performance of mixes decreased by increasing RM incorporation, whereas the simultaneous application of 20% RM and 5% SF as cement replacement yielded the same compressive strength as the reference. Furthermore, an evaluation of global warming potential and used water as environmental impacts in addition to a simplified cost analysis was performed on all mixes. Overall, the mix made with 10% RM and 7.5% SF achieved the highest consolidated performance score.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All the data supporting the findings of this study and the properties of materials used to complete the experiments are available within the article.
Acknowledgments
The support from the Ferdowsi University of Mashhad is gratefully acknowledged. Hadigheh would like to acknowledge the support received through the Australian Research Council’s Discovery Early Career Researcher Award (DECRA) fellowship scheme (Project DE200100406). The authors also gratefully acknowledge the support of the Portuguese Foundation for Science and Technology and the CERIS Research Institute, Instituto Superior Técnico, Universidade de Lisboa.
References
ACI (American Concrete Institute). 2002. Standard practice for selecting proportions for normal. heavyweight, and mass concrete. ACI 211-2. Farmington Hills, MI: ACI.
Adil, G., J. T. Kevern, and D. Mann. 2020. “Influence of silica fume on mechanical and durability of pervious concrete.” Constr. Build. Mater. 247 (Jun): 118453. https://doi.org/10.1016/j.conbuildmat.2020.118453.
Albattat, R. A., Z. Jamshidzadeh, and A. K. Alasadi. 2020. “Assessment of compressive strength and durability of silica fume-based concrete in acidic environment.” Innovative Infrastruct. Solutions 5 (1): 1–7. https://doi.org/10.1007/s41062-020-0269-1.
AlKhatib, A., M. Maslehuddin, and S. U. Al-Dulaijan. 2020. “Development of high performance concrete using industrial waste materials and nano-silica.” J. Mater. Res. Technol. 9 (3): 6696–6711. https://doi.org/10.1016/j.jmrt.2020.04.067.
Asadi Shamsabadi, E., M. Ghalehnovi, J. De Brito, and A. Khodabakhshian. 2018. “Performance of concrete with waste granite powder: The effect of superplasticizers.” Appl. Sci. 8 (10): 1808. https://doi.org/10.3390/app8101808.
ASTM. 2007. Standard practice for making and curing concrete test specimens in the laboratory. ASTM C192/C192M. West Conshohocken, PA: ASTM.
ASTM. 2011. Standard test method for splitting tensile strength of cylindrical concrete specimens. ASTM C496/C496M. West Conshohocken, PA: ASTM.
ASTM. 2012a. Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete. ASTM C618. West Conshohocken, PA: ASTM.
ASTM. 2012b. Standard specification for portland cement. ASTM C150/150M. West Conshohocken, PA: ASTM.
ASTM. 2012c. Standard test methods for chemical resistance of mortars, grouts, and monolithic surfacing and polymer concretes. ASTM C267. West Conshohocken, PA: ASTM.
ASTM. 2012d. Standard test method for slump of hydraulic-cement concrete. ASTM C143/C143M. West Conshohocken, PA: ASTM.
ASTM. 2013a. Standard guide for powder particle size analysis. ASTM E2651. West Conshohocken, PA: ASTM.
ASTM. 2013b. Standard test method for density, absorption, and voids in hardened concrete. ASTM C642. West Conshohocken, PA: ASTM.
ASTM. 2015. Standard specification for silica fume used in cementitious mixtures. ASTM C1240. West Conshohocken, PA: ASTM.
ASTM. 2018. Standard test methods for chemical analysis of hydraulic cement. ASTM C114. West Conshohocken, PA: ASTM.
Azarsa, P., and R. Gupta. 2017. “Electrical resistivity of concrete for durability evaluation: A review.” Adv. Mater. Sci. Eng. 2017: 11–40. https://doi.org/10.1155/2017/8453095.
Bagheri, A., H. Zanganeh, H. Alizadeh, M. Shakerinia, and M. A. S. Marian. 2013. “Comparing the performance of fine fly ash and silica fume in enhancing the properties of concretes containing fly ash.” Constr. Build. Mater. 47 (Oct): 1402–1408. https://doi.org/10.1016/j.conbuildmat.2013.06.037.
Bare, J. 2011. “The tool for the reduction and assessment of chemical and other environmental impacts 2.0.” Clean Technol. Environ. Policy 13 (5): 687–696. https://doi.org/10.1007/s10098-010-0338-9.
Bhanja, S., and B. Sengupta. 2005. “Influence of silica fume on the tensile strength of concrete.” Cem. Concr. Res. 35 (4): 743–747. https://doi.org/10.1016/j.cemconres.2004.05.024.
BSI (British Standards Institution). 2000. Testing hardened concrete? Part 1: Shape, dimensions and other requirements for specimens and moulds. BS EN 12390-1. London: BSI.
BSI (British Standards Institution). 2009. Testing hardened concrete compressive strength of test specimens. BS EN 12390-3. London: BSI.
Castro, J., D. Bentz, and J. Weiss. 2011. “Effect of sample conditioning on the water absorption of concrete.” Cem. Concr. Compos. 33 (8): 805–813. https://doi.org/10.1016/j.cemconcomp.2011.05.007.
Celik, K., C. Meral, A. P. Gursel, P. K. Mehta, A. Horvath, and P. J. Monteiro. 2015. “Mechanical properties, durability, and life-cycle assessment of self-consolidating concrete mixtures made with blended Portland cements containing fly ash and limestone powder.” Cem. Concr. Compos. 56 (Feb): 59–72. https://doi.org/10.1016/j.cemconcomp.2014.11.003.
CEN (European Committee for Standardization). 2000. Testing hardened concrete. Part 2: Making and curing specimens for strength tests. BS EN 12390-2. Brussels, Belgium: CEN.
Chiaia, B., A. P. Fantilli, A. Guerini, G. Volpatti, and D. Zampini. 2014. “Eco-mechanical index for structural concrete.” Constr. Build. Mater. 67 (Sep): 386–392. https://doi.org/10.1016/j.conbuildmat.2013.12.090.
Curran, M., J. Overly, P. Hofstetter, R. Muller, and B. Lippiatt. 2002. BEES 2.0: Building for environmental and economic sustainability peer review report. Gaithersburg, MD: NIST.
El-Enein, S. A., M. F. Kotkata, G. B. Hanna, M. Saad, and M. M. Abd El Razek. 1995. “Electrical conductivity of concrete containing silica fume.” Cem. Concr. Res. 25 (8): 1615–1620. https://doi.org/10.1016/0008-8846(95)00156-5.
Ghalehnovi, M., N. Roshan, E. Hakak, E. Asadi Shamsabadi, and J. de Brito. 2019. “Effect of red mud (bauxite residue) as cement replacement on the properties of self-compacting concrete incorporating various fillers.” J. Cleaner Prod. 240 (Dec): 118213. https://doi.org/10.1016/j.jclepro.2019.118213.
Glavind, M., J. S. Damtoft, and S. Röttig. 2001. “Cleaner technology solutions in the life cycle of concrete products.” In Proc., CANMET/ACI Int. Conf. on Sustainable Development and Concrete Technology, edited by M. Malhotra. Farmington Hills, MI: American Concrete Institute.
Guo, Z., T. Jiang, J. Zhang, X. Kong, C. Chen, and D. E. Lehman. 2020. “Mechanical and durability properties of sustainable self-compacting concrete with recycled concrete aggregate and fly ash, slag and silica fume.” Constr. Build. Mater. 231 (Jan): 117115. https://doi.org/10.1016/j.conbuildmat.2019.117115.
Habert, G., E. Denarié, A. Šajna, and P. Rossi. 2013. “Lowering the global warming impact of bridge rehabilitations by using ultra high performance fibre reinforced concretes.” Cem. Concr. Res. 38 (Apr): 1–11. https://doi.org/10.1016/j.cemconcomp.2012.11.008.
Hadigheh, S. A., R. J. Gravina, and S. T. Smith. 2017. “Effect of acid attack on FRP-to-concrete bonded interfaces.” Constr. Build. Mater. 152 (Oct): 285–303. https://doi.org/10.1016/j.conbuildmat.2017.06.140.
Hadigheh, S. A., F. Ke, and S. Kashi. 2020. “3D acid diffusion model for FRP-strengthened reinforced concrete structures: Long-term durability prediction.” Constr. Build. Mater. 261 (Nov): 120548. https://doi.org/10.1016/j.conbuildmat.2020.120548.
Haque, M. A., B. Chen, and Y. Liu. 2020. “The role of bauxite and fly-ash on the water stability and microstructural densification of magnesium phosphate cement composites.” Constr. Build. Mater. 260 (Nov): 119953. https://doi.org/10.1016/j.conbuildmat.2020.119953.
Holanda, R. B., P. M. P. Silva, A. L. V. do Carmo, A. F. Cardoso, R. V. da Costa, C. C. A. de Melo, A. R. Lucheta, and M. Montini. 2020. “Bayer process towards the circular economy—Soil conditioners from bauxite residue.” In Proc., Light Metals, 107–114. Cham, Switzerland: Springer. https://doi.org/10.1007/978-3-030-36408-3_15.
Jana, D. 2007. “A new look to an old pozzolan, clinoptilolite—A promising pozzolan in concrete.” In Proc., 29th ICMA Conf. on Cement Microscopy, 168–206. Québec: Curran Associates.
Joorabchian, S. M. 2010. “Durability of concrete exposed to sulfuric acid attack.” Master’s thesis, Applied Science in the Program of Civil Engineering, Ryerson Univ.
Jun, Y., J. H. Kim, and T. Kim. 2019. “Hydration of calcium sulfoaluminate-based binder incorporating red mud and silica fume.” Appl. Sci. 9 (11): 2270.
Kadri, E. H., and R. Duval. 2009. “Hydration heat kinetics of concrete with silica fume.” Constr. Build. Mater. 23 (11): 3388–3392. https://doi.org/10.1016/j.conbuildmat.2009.06.008.
Kelham, S. 1988. “A water absorption test for concrete.” Mag. Concr. Res. 40 (143): 106–110. https://doi.org/10.1680/macr.1988.40.143.106.
Khayat, K. H., and P. C. Aitcin. 1993. “Silica fume: A unique supplementary cementitious material.” In Vol. 4 of Mineral admixtures in cement and concrete, 227–265. New Delhi, India: ABI Books Private Limited.
Khodabakhshian, A., J. De Brito, M. Ghalehnovi, and E. Asadi Shamsabadi. 2018a. “Mechanical, environmental and economic performance of structural concrete containing silica fume and marble industry waste powder.” Constr. Build. Mater. 169 (Apr): 237–251. https://doi.org/10.1016/j.conbuildmat.2018.02.192.
Khodabakhshian, A., M. Ghalehnovi, J. De Brito, and E. Asadi Shamsabadi. 2018b. “Durability performance of structural concrete containing silica fume and marble industry waste powder.” J. Cleaner Prod. 170 (Jan): 42–60. https://doi.org/10.1016/j.jclepro.2017.09.116.
Konečný, P., P. Ghosh, K. Hrabová, P. Lehner, and B. Teplý. 2020. “Effective methodology of sustainability assessment of concrete mixtures.” Mater. Struct. 53 (4): 1–15. https://doi.org/10.1617/s11527-020-01535-3.
Kushwaha, M., S. Akhtar, and S. Rajput. 2013. “Development of the self compacting concrete by industrial waste (red mud).” Int. J. Eng. 3 (4): 539–542.
Layssi, H., P. Ghods, A. R. Alizadeh, and M. Salehi. 2015. “Electrical resistivity of concrete.” Concr. Int. 37 (5): 41–46.
Liu, R. X., and C. S. Poon. 2016. “Utilization of red mud derived from bauxite in self-compacting concrete.” J. Cleaner Prod. 112 (Jan): 384–391. https://doi.org/10.1016/j.jclepro.2015.09.049.
Manfroi, E. P., M. Cheriaf, and J. C. Rocha. 2014. “Microstructure, mineralogy and environmental evaluation of cementitious composites produced with red mud waste.” Constr. Build. Mater. 67 (Sep): 29–36. https://doi.org/10.1016/j.conbuildmat.2013.10.031.
Marceau, M., M. A. Nisbet, and M. G. Van Geem. 2006. Life cycle inventory of portland cement manufacture. SN3011. Skokie, IL: Portland Cement Association.
Mehta, A., and D. K. Ashish. 2020. “Silica fume and waste glass in cement concrete production: A review.” J. Build. Eng. 29 (May): 100888. https://doi.org/10.1016/j.jobe.2019.100888.
Neupane, K., and S. A. Hadigheh. 2021. “Sodium hydroxide-free geopolymer binder for prestressed concrete applications.” Constr. Build. Mater. 293 (Jul): 123397. https://doi.org/10.1016/j.conbuildmat.2021.123397.
Nikbin, I. M., M. Aliaghazadeh, S. H. Charkhtab, and A. Fathollahpour. 2018. “Environmental impacts and mechanical properties of lightweight concrete containing bauxite residue (red mud).” J. Cleaner Prod. 172 (Jan): 2683–2694. https://doi.org/10.1016/j.jclepro.2017.11.143.
Ofuyatan, O. M., A. M. Olowofoyeku, S. O. Edeki, J. Oluwafemi, A. Ajao, and O. David. 2019. “Incorporation of silica fume and metakaolin on self compacting concrete.” In Vol. 1378 of Proc., Journal of Physics: Conf. Series, 042089. Bristol, UK: IOP Publishing.
Onuaguluchi, O., and D. K. Panesar. 2014. “Hardened properties of concrete mixtures containing pre-coated crumb rubber and silica fume.” J. Cleaner Prod. 82 (Nov): 125–131. https://doi.org/10.1016/j.jclepro.2014.06.068.
Ortega, J. M., M. Cabeza, A. J. Tenza-Abril, T. Real-Herraiz, M. Á. Climent, and I. Sánchez. 2019. “Effects of red mud addition in the microstructure, durability and mechanical performance of cement mortars.” Appl. Sci. 9 (5): 984. https://doi.org/10.3390/app9050984.
Ramezanianpour, A. A., A. Zolfagharnasab, F. B. Zadeh, S. H. Estahbanati, R. Boushehri, M. R. Pourebrahimi, and A. M. Ramezanianpour. 2017. “Effect of supplementary cementing materials on concrete resistance against sulfuric acid attack.” In Proc., 2017 Fib Symp., High Tech Concrete: Where Technology and Engineering Meet, 2290–2298. Cham, Switzerland: Springer.
Rathod, R. R., N. T. Suryawanshi, and P. D. Memade. 2013. “Evaluation of the properties of red mud concrete.” IOSR J. Mech. Civ. Eng. 1: 31–34.
Ribeiro, D. V., J. A. Labrincha, and M. R. Morelli. 2012. “Effect of the addition of red mud on the corrosion parameters of reinforced concrete.” Cem. Concr. Res. 42 (1): 124–133. https://doi.org/10.1016/j.cemconres.2011.09.002.
Romano, R. C. O., H. M. Bernardo, M. H. Maciel, R. G. Pileggi, and M. A. Cincotto. 2018. “Hydration of portland cement with red mud as mineral addition.” J. Therm. Anal. Calorim. 131 (3): 2477–2490. https://doi.org/10.1007/s10973-017-6794-2.
Sabet, F. A., N. A. Libre, and M. Shekarchi. 2013. “Mechanical and durability properties of self consolidating high performance concrete incorporating natural zeolite, silica fume and fly ash.” Constr. Build. Mater. 44 (Jul): 175–184. https://doi.org/10.1016/j.conbuildmat.2013.02.069.
Sabzi, J., E. Asadi Shamsabadi, M. Ghalehnovi, S. A. Hadigheh, A. Khodabakhshian, and J. de Brito. 2021. “Mechanical and durability properties of mortars incorporating red mud, ground granulated blast furnace slag, and electric arc furnace dust.” Appl. Sci. 11 (9): 4110. https://doi.org/10.3390/app11094110.
Sahoo, K., P. K. Dhir, P. R. R. Teja, P. Sarkar, and R. Davis. 2020. “Variability of silica fume concrete and its effect on seismic safety of reinforced concrete buildings.” J. Mater. Civ. Eng. 32 (4): 04020024. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003072.
Sawant, B., D. B. Kamble, and T. B. Shinde. 2016. “Utilization of industrial waste (red mud) in concrete construction.” Int. J. Innovation Res. Sci. Eng. 2 (3): 112–121.
Senff, L., R. C. E. Modolo, A. S. Silva, V. M. Ferreira, D. Hotza, and J. A. Labrincha. 2014. “Influence of red mud addition on rheological behavior and hardened properties of mortars.” Constr. Build. Mater. 65 (Aug): 84–91. https://doi.org/10.1016/j.conbuildmat.2014.04.104.
Serdar, M., I. Biljecki, and D. Bjegović. 2017. “High-performance concrete incorporating locally available industrial by-products.” J. Mater. Civ. Eng. 29 (3): 04016239. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001773.
Shafaghat, J., and A. Allahverdi. 2019. “Enhancing concrete properties by using silica fume as reactive powder and portland cement-clinker as reactive aggregate.” J. Mater. Civ. Eng. 31 (11): 04019278. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002920.
Shi, C. 2004. “Effect of mixing proportions of concrete on its electrical conductivity and the rapid chloride permeability test (ASTM C1202 or ASSHTO T277) results.” Cem. Concr. Res. 34 (3): 537–545. https://doi.org/10.1016/j.cemconres.2003.09.007.
Siddique, R. 2011. “Utilization of silica fume in concrete: Review of hardened properties.” Resour. Conserv. Recycl. 55 (11): 923–932. https://doi.org/10.1016/j.resconrec.2011.06.012.
Silva, P. M. P., A. L. V. do Carmo, R. B. Holanda, F. G. Gomes, E. Nogueira, R. V. da Costa, C. C. A. de Melo, A. R. Lucheta, and M. Montini. 2020. “Brazilian bauxite residue physical–chemical characterization and acidic neutralization potential.” In Proc., Light Metals 2020, 115–123. Cham, Switzerland: Springer. https://doi.org/10.1007/978-3-030-36408-3_16.
Tang, W. C., Z. Wang, Y. Liu, and H. Z. Cui. 2018. “Influence of red mud on fresh and hardened properties of self-compacting concrete.” Constr. Build. Mater. 178 (Jul): 288–300. https://doi.org/10.1016/j.conbuildmat.2018.05.171.
Taylor, P. C. 2013. Curing concrete. Boca Raton, FL: CRC Press.
Torres, A. L. T., L. M. S. D. Souza, M. I. P. D. Silva, and F. de Andrade Silva. 2019. “Concrete degradation mechanisms by sulfuric acid attack.” Mag. Concr. Res. 71 (7): 349–361. https://doi.org/10.1680/jmacr.18.00194.
Toutanji, H. A., and Z. Bayasi. 1999. “Effect of curing procedures on properties of silica fume concrete.” Cem. Concr. Res. 29 (4): 497–501. https://doi.org/10.1016/S0008-8846(98)00197-5.
Venkatesh, C., R. Nerella, and M. S. R. Chand. 2020. “Experimental investigation of strength, durability, and microstructure of red-mud concrete.” J. Korean Ceram. Soc. 57 (2): 167–174. https://doi.org/10.1007/s43207-019-00014-y.
Yao, Y., Y. Li, X. Liu, S. Jiang, C. Feng, and E. Rafanan. 2013. “Characterization on a cementitious material composed of red mud and coal industry by-products.” Constr. Build. Mater. 47 (Oct): 496–501. https://doi.org/10.1016/j.conbuildmat.2013.05.030.
Yuan, B., S. Yuan, C. Straub, and W. Chen. 2020. “Activation of binary binder containing fly ash and portland cement using red mud as alkali source and its application in controlled low-strength materials.” J. Mater. Civ. Eng. 32 (2): 04019356. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003023.
Zelić, J., D. Rušić, D. Veža, and R. Krstulović. 2000. “The role of silica fume in the kinetics and mechanisms during the early stage of cement hydration.” Cem. Concr. Res. 30 (10): 1655–1662. https://doi.org/10.1016/S0008-8846(00)00374-4.
Zhang, S., K. Cao, C. Wang, X. Wang, J. Wang, and B. Sun. 2020. “Effect of silica fume and waste marble powder on the mechanical and durability properties of cellular concrete.” Constr. Build. Mater. 241 (Apr): 117980. https://doi.org/10.1016/j.conbuildmat.2019.117980.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Nov 3, 2020
Accepted: Jun 4, 2021
Published online: Nov 19, 2021
Published in print: Feb 1, 2022
Discussion open until: Apr 19, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Mansour Ghalehnovi, Hosseinali Rahdar, Mohamad Ghorbanzadeh, Naeim Roshan, Sara Ghalehnovi, Effect of Marble Waste Powder and Silica Fume on the Bond Behavior of Corroded Reinforcing Bar Embedded in Concrete, Journal of Materials in Civil Engineering, 10.1061/(ASCE)MT.1943-5533.0004633, 35, 3, (2023).
- Atena Asgarian, Naeim Roshan, Mansour Ghalehnovi, The Strength, Microstructure, and ecological assessment of concrete mix incorporating waste glass powder and polypropylene fiber, Construction and Building Materials, 10.1016/j.conbuildmat.2023.130726, 371, (130726), (2023).
- Naeim Roshan, Mansour Ghalehnovi, Seyed Soroush Pakzad, Recycled steel fiber for fiber reinforced concrete production: fresh and hardened properties, cost, and ecological assessments, Journal of Building Pathology and Rehabilitation, 10.1007/s41024-023-00270-w, 8, 1, (2023).
- Daniel M. Petroche, Angel D. Ramirez, The Environmental Profile of Clinker, Cement, and Concrete: A Life Cycle Perspective Study Based on Ecuadorian Data, Buildings, 10.3390/buildings12030311, 12, 3, (311), (2022).
- Kennedy C. Onyelowe, Ahmed M. Ebid, Ariel Riofrio, Atefeh Soleymani, Haci Baykara, Denise-Penelope N. Kontoni, Hisham A. Mahdi, Hashem Jahangir, Global warming potential-based life cycle assessment and optimization of the compressive strength of fly ash-silica fume concrete; environmental impact consideration, Frontiers in Built Environment, 10.3389/fbuil.2022.992552, 8, (2022).
- Elyas Asadi Shamsabadi, Naeim Roshan, S. Ali Hadigheh, Moncef L. Nehdi, Ali Khodabakhshian, Mansour Ghalehnovi, Machine learning-based compressive strength modelling of concrete incorporating waste marble powder, Construction and Building Materials, 10.1016/j.conbuildmat.2022.126592, 324, (126592), (2022).
- Mohammad Meghdadian, Mansour Ghalehnovi, Retrofitting of Core Reinforced Concrete Shear Wall System with Opening Using Steel Plates and FRP Sheets, A Case Study, International Journal of Steel Structures, 10.1007/s13296-022-00614-1, 22, 4, (920-939), (2022).
- Abel Adeize Barnabas, Oluwatosin Abiodun Balogun, Abayomi Adewale Akinwande, John Friday Ogbodo, Akeem Oladele Ademati, Enesi Isaac Dongo, Valentin Romanovski, Reuse of walnut shell waste in the development of fired ceramic bricks, Environmental Science and Pollution Research, 10.1007/s11356-022-22955-4, 30, 5, (11823-11837), (2022).