Evolution of Characteristics of Warm-Mix Rubber-Modified Asphalt during Water Damage under Different Immersion Times
Publication: Journal of Materials in Civil Engineering
Volume 34, Issue 1
Abstract
Fourier-transform infrared spectroscopy (FTIR), atomic force microscopy (AFM), and contact angle measurements were conducted in the present research to analyze the characteristics of warm-mix rubber-modified asphalt during water damage under different immersion times. The evolution of characteristics of asphalt binders was investigated based on their chemical compositions, functional group indexes, nanomechanical characteristics, and surface free energies. It was found that water molecules changed the proportion of each component of asphalt binders. With the increase of immersion time, the functional group index representing the damage degree increased and more water molecules interacted with polar components of asphalt binders, resulting in more molecular fracturing and recombination. Water molecules penetrated asphalt binders, and the interfacial tension and the hydrostatic pressure in the presence of water caused the redistribution and aggregation of molecules in asphalt binders, forming a new morphology and structure. The increase of the immersion time aggravated the reduction of the adhesion force and the increase of the Derjaguin-Muller–Toropov (DMT) modulus of asphalt binders. In addition, with the increase of the immersion time, the surface free energy (and its dispersion component) of asphalt binders decreased gradually and, in turn, the van der Waals force between asphalt molecules also decreased. The addition of warm-mix additives (EM and SDYK) changed the morphology of the rubber-modified asphalt (60MCR) and increased the adhesion force, DMT modulus, and surface free energy of asphalt binders. Simultaneously, the antiwater damage ability of asphalt binders was also improved. After different immersion periods, it was found that for the rubber-modified asphalt with SDYK additive (0.6S-60MCR), the increment degrees of the DMT modulus and the functional group index as well as the reduction degrees of the adhesion force and the surface free energy of asphalt binders were lower than those of the rubber-modified asphalt (60MCR) and the rubber-modified asphalt with EM additive (1E-60MCR), indicating its superior resistance to water damage.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
This study was funded by National Natural Science Foundation of China (11762012), Transportation Technology Project of Inner Mongolia Autonomous Region of China (2019MS05079), and Scientific Research Project of Inner Mongolia University of Technology (ZY201809).
References
Ahmad, M., U. A. Mannan, M. R. Islam, and R. A. Tarefder. 2018. “Chemical and mechanical changes in asphalt binder due to moisture conditioning.” Road Mater. Pavement Des. 19 (5): 1216–1229. https://doi.org/10.1080/14680629.2017.1299631.
Arifuzzaman, M. D. 2010. “Nano-scale evaluation of moisture damage in asphalt.” Ph.D. dissertation, Dept. of Civil Engineering, Univ. of New Mexico.
Chang, R., and P. Hao. 2017. “Rheological properties and aging mechanism of rubber crumb composite RET modified asphalt before and after aging.” [In Chinese.] J. Build. Mater. 20 (6): 914–920.
Chinese Standard. 2011. Test methods of bitumen and bituminous mixtures for highway engineering. JTG E20. Beijing: Ministry of Transport.
Feng, Z. G., S. J. Wang, H. J. Bian, Q. L. Guo, and X. J. Li. 2016. “FTIR and rheology analysis of aging on different ultraviolet absorber modified bitumen.” Constr. Build. Mater. 115 (Jul): 48–53. https://doi.org/10.1016/j.conbuildmat.2016.04.040.
Guo, M., M. Liang, Y. Jiao, W. Zhao, Y. Duan, and H. Liu. 2020a. “A review of phase change materials in asphalt binder and asphalt mixture.” Constr. Build. Mater. 258 (Oct): 119565. https://doi.org/10.1016/j.conbuildmat.2020.119565.
Guo, M., H. Liu, Y. Jiao, L. Mo, Y. Tan, D. Wang, and M. Liang. 2020b. “Effect of WMA-RAP technology on pavement performance of asphalt mixture: A state-of-the-art review.” J. Cleaner Prod. 266 (Sep): 121704. https://doi.org/10.1016/j.jclepro.2020.121704.
Guo, M., and Y. Tan. 2021. “Interaction between asphalt and mineral fillers and its correlation to mastics’ viscoelasticity.” Int. J. Pavement Eng. 22 (1): 1–10. https://doi.org/10.1080/10298436.2019.1575379.
Hao, L., Z. Shufang, Z. Changying, and L. Zhangcheng. 2009. “An investigatory summary on technology of warm mix asphalt in America.” [In Chinese.] Munic. Eng. Technol. 27 (4): 332–335.
Hung, A. M., A. Goodwin, and E. H. Fini. 2017. “Effects of water exposure on bitumen surface microstructure.” Constr. Build. Mater. 135 (Mar): 682–688. https://doi.org/10.1016/j.conbuildmat.2017.01.002.
Khorasani, S., E. Masad, E. Kassem, and R. A. Al-Rub. 2013. “Nano-mechanical characterization of mastic aggregate, and interfacial zone in asphalt composites.” J. Test. Eval. 41 (6): 924–932. https://doi.org/10.1520/JTE20120178.
Lesar, B., M. Pavlič, M. Petrič, A. S. Škapin, and M. Humar. 2011. “Wax treatment of wood slows photodegradation.” Polym. Degrad. Stab. 96 (7): 1271–1278. https://doi.org/10.1016/j.polymdegradstab.2011.04.006.
Li, B., Z. Chen, X. Liu, Z. Lu, and X. Li. 2018. “Nano-adhesive characteristics of SBS modified asphalt containing warm mix additive before and after immersion.” [In Chinese.] J. Build. Mater. 21 (1): 60–66.
Li, B., Y. Wang, Z. Lu, X. Li, and X. Li. 2017a. “Moisture susceptibility of warm mix asphalt and binders after short-term aging process.” [In Chinese.] China J. Highway Transp. 30 (2): 39–52.
Li, B., Z. Zhang, X. Liu, X. Li, and Z. Lu. 2017b. “Adhesion in SBS modified asphalt containing warm mix additive and aggregate system based on surface free theory.” [In Chinese.] Mater. Rev. 31 (4): 115–121.
Li, H., B. Li, Q. Wang, L. Li, and Y. Wang. 2017c. “Adhesion of aged SBS modified asphalt binder containing warm mix additive based on surface free theory.” [In Chinese.] Mater. Rev. 31 (8): 129–133.
Li, X., et al. 2013. “Review of warm mix asphalt technology.” [In Chinese.] Pet. Asphalt 27 (1): 66–71.
Liu, G., E. Nielsen, J. Komacka, L. Greet, and M. van de Ven. 2014. “Rheological and chemical evaluation on the aging properties of SBS polymer modified bitumen from the laboratory to the field.” Constr. Build. Mater. 51 (51): 244–248. https://doi.org/10.1016/j.conbuildmat.2013.10.043.
Liu, X., S. Wu, G. Liu, and L. Li. 2015. “Effect of ultraviolet aging on rheology and chemistry of LDH-modified bitumen.” Materials (Basel) 8 (8): 587–596.
Noguera, J. A. H., H. A. R. Quintana, and W. D. F. Gómez. 2014. “The influence of water on the oxidation of asphalt cements.” Constr. Build. Mater. 71 (Nov): 451–455. https://doi.org/10.1016/j.conbuildmat.2014.08.064.
Omar, H. A., N. I. M. Yusoff, H. Ceylan, I. A. Rahman, Z. Sajuri, F. M. Jakarni, and A. Ismail. 2018. “Determining the water damage resistance of nano-clay modified bitumens using the indirect tensile strength and surface free energy methods.” Constr. Build. Mater. 167 (Apr): 391–402. https://doi.org/10.1016/j.conbuildmat.2018.02.011.
Owens, D. K., and R. C. Wendt. 1969. “Estimation of the surface free energy of polymers.” J. Appl. Polym. Sci. 13 (8): 1741–1747. https://doi.org/10.1002/app.1969.070130815.
Pang, L., X. Zhang, S. Wu, Y. Ye, and Y. Li. 2018. “Influence of water solute exposure on the chemical evolution and rheological properties of asphalt.” Materials (Basel) 11 (6): 983. https://doi.org/10.3390/ma11060983.
Plancher, H. 1994. Fundamental properties of asphalt–aggregate interactions including adhesion and absorption. Washington, DC: Strategic Highway Research Program, National Research Council.
Shen, J. 2001. Road performance of asphalt and asphalt mixture, 185–187. Beijing: China Communications Press.
Song, Y. 2011. “Components of road asphalt water damage and their influencing factors.” [In Chinese.] J. China Univ. Pet. 35 (4): 172–176.
Tan, Y., and M. Guo. 2013. “Using surface free energy method to study the cohesion and adhesion of asphalt mastic.” Constr. Build. Mater. 47 (Oct): 254–260. https://doi.org/10.1016/j.conbuildmat.2013.05.067.
Tarefder, R. A., and A. Zaman. 2011. Characterization of asphalt materials for moisture damage using atomic force microscopy and nanoindentation, 237–256. Berlin: Springer.
Thomas, K. P. 2002. “Impact of water during the laboratory aging of asphalt.” Road Mater. Pavement Des. 3 (3): 299–315. https://doi.org/10.1080/14680629.2002.9689927.
Van Oss, C. J., M. K. Chaudhury, and R. J. Good. 1988. “Interfacial Lifshitz-van der Waals and polar interactions in macroscopic systems.” Chem. Rev. 88 (6): 927–941. https://doi.org/10.1021/cr00088a006.
Vasconcelos, K. L., A. Bhasin, and D. N. Little. 2011. “History dependence of water diffusion in asphalt binders.” Int. J. Pavement Eng. 12 (5): 497–506. https://doi.org/10.1080/10298436.2010.535536.
Xiao, F., and S. N. Amirkhanian. 2010. “Effects of liquid antistrip additives on rheology and moisture susceptibility of water bearing warm mixtures.” Constr. Build. Mater. 24 (9): 1649–1655. https://doi.org/10.1016/j.conbuildmat.2010.02.027.
Yao, Z., H. Zhu, M. Gong, J. Yang, G. Xu, and Y. Zhong. 2017. “Characterization of asphalt materials’ moisture susceptibility using multiple methods.” Constr. Build. Mater. 155 (Nov): 286–295. https://doi.org/10.1016/j.conbuildmat.2017.08.032.
Yiming, C. 2013. “Research development and design method of warm mix asphalt in United States of America.” [In Chinese.] Transp. Stand. 17 (1): 8–11.
Zhang, X., et al. 2018. “Effects of the aqueous medium on asphalt aging characteristic functional groups.” [In Chinese.] J. Technol. 42 (1): 122–131.
Zhou, G. Q. 2014. “Investigation on the rheological modification mechanism of organic wax additives of crumb rubber modified asphalt.” [In Chinese.] Highway Eng. 39 (6): 330–335.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Dec 29, 2020
Accepted: May 13, 2021
Published online: Oct 25, 2021
Published in print: Jan 1, 2022
Discussion open until: Mar 25, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Lan Wang, Le Chen, Ya Xin Li, Han Feng Guan, Meng Jing, Adhesion Characteristics of Warm-Mix Crumb Rubber-Modified Asphalt-Steel Slag Interface under Water Erosion, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-17981, 36, 9, (2024).
- Shifa Xu, Xiaoyu Ren, Hongliang Wu, Zixiao Zhu, Yansheng Yang, Meng Ling, Design and Water Stability Evaluation of Cold Mix Emulsified Asphalt Mixture under Multiple Freeze–Thaw Cycles, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-17137, 36, 8, (2024).
- Xiaoyan Huang, Lan Wang, Evolution of Low-Temperature Properties of Warm-Mix Rubber-Modified Asphalt under Freeze–Thaw Cycles, Journal of Materials in Civil Engineering, 10.1061/(ASCE)MT.1943-5533.0004575, 35, 2, (2023).
- Hansong Wu, Aiqin Shen, Xiang Chen, Ziming He, Guiping Ren, Chao Yao, Effects and Reaction Mechanism of Acid Rain on the Pavement Performance of Asphalt Mixtures with Steel Slag Aggregates, Journal of Materials in Civil Engineering, 10.1061/(ASCE)MT.1943-5533.0004428, 34, 10, (2022).
- Kaixi Duan, Chaohui Wang, Jikang Liu, Liang Song, Qian Chen, Yuanzhao Chen, Research progress and performance evaluation of crumb-rubber-modified asphalts and their mixtures, Construction and Building Materials, 10.1016/j.conbuildmat.2022.129687, 361, (129687), (2022).