Experimental and Finite-Element Study on Cyclic Tensile Properties of Stainless-Clad Bimetallic Steel Plate
Publication: Journal of Materials in Civil Engineering
Volume 33, Issue 11
Abstract
The stainless-clad bimetallic steel plate (SCBSP) formed by cladding a layer of stainless steel on the surface of a mild steel plate is a solution to improve the corrosion resistance of steel in corrosive environments To study the hysteretic behavior of stainless-clad bimetallic steel plates under cyclic load, tests of 14 specimens taken from Q235+S34553 SCBSP with normal thickness of were carried out, in which 14 different loading protocols were incorporated. Based on the test results, the hysteretic behavior of the SCBSP specimens was analyzed. The envelope curves of the SCBSP under cyclic loading were fitted based on the Ramberg-Osgood model (R-O model), and the energy-dissipation capacity of the SCBSP was evaluated by calculating their energy-dissipation index (EDI). Finally, the Chaboche combined hardening model was employed, its relevant parameters were identified, and the identification results were verified by finite-element simulation. The results show that SCBSP has good energy-dissipation capacity. The R-O model and Chaboche model can well express the mechanical behavior of SCBSPs under cyclic loading.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The research presented in this paper was financially supported by the National Natural Science Foundation of China (NSFC-51578089) and 111 Project (Grant No. B18062).
References
Arridge, R. G. C., and D. Heywood. 1967. “The freeze-coating of filaments.” Br. J. Appl. Phys. 18 (4): 447–457. https://doi.org/10.1088/0508-3443/18/4/308.
ASTM. 2015. Standard practice for conducting force controlled constant amplitude axial fatigue tests of metallic materials. ASTM E466. West Conshohocken, PA: ASTM.
Baddoo, N. R. 2008. “Stainless steel in construction: A review of research, applications challenges and opportunities.” J. Constr. Steel Res. 64 (11): 1199–1206. https://doi.org/10.1016/j.jcsr.2008.07.011.
Ban, H., R. Bai, K. F. Chung, J. Zhu, and Y. Bai. 2018. “Research progress on material properties of clad steel.” In Proc., 12th Int. Conf. on Advances in Steel-Concrete Composite Structures (ASCCS 2018), 653–658. Valencia, Spain: Universitat Politècnica de València.
Ban, H. Y., and Y. J. Shi. 2018. “An innovative high performance steel product for structural engineering: Bi-metallic steel.” In Proc., Int. Conf. on Engineering Research and Practice for Steel Construction 2018 (ICSC 2018), 424–430. Hong Kong: Hong Kong Polytechnic Univ.
Ban, H. Y., Y. J. Shi, and X. Y. Tao. 2017. “Use of clad steel in engineering structures.” In Proc., 15th East Asia-Pacific Conf. on Structural Engineering and Construction (EASEC-15), 1167–1173. Shanghai, China: Tongji Univ.
Chaboche, J. L. 1986. “Time-independent constitutive theories for cyclic plasticity.” Int. J. Plast. 2 (2): 149–188. https://doi.org/10.1016/0749-6419(86)90010-0.
Chaboche, J. L. 1991. “On some modifications of kinematic hardening to improve the description of ratchetting effects.” Int. J. Plast. 7 (7): 661–678. https://doi.org/10.1016/0749-6419(91)90050-9.
Chaboche, J. L. 2008. “A review of some plasticity and viscoplasticity constitutive theories.” Int. J. Plast. 24 (10): 1642–1693. https://doi.org/10.1016/j.ijplas.2008.03.009.
Chuaiphan, W., S. Chandra-Ambhorn, B. Sornil, and W. Bleck. 2009. “Microstructure, mechanical and corrosion behaviour of dissimilar weldments between AISI 304 stainless steels and AISI 1020 carbon steels produced by gas tungsten arc welding using different consumables.” In Sheet metal 2009, 533–541. Bangkok, Thailand: Sirindhorn International Thai-German Graduate School of Engineering, King Mongkut’s Univ. of Technology North Bangkok.
Cui, F. S., and A. A. Sagüés. 2006a. “Exploratory assessment of corrosion behavior of stainless steel clad rebar: Part 1—Experimental.” Corrosion 62 (9): 822–838. https://doi.org/10.5006/1.3278307.
Cui, F. S., and A. A. Sagüés. 2006b. “Exploratory assessment of corrosion behavior of stainless steel clad rebar: Part 2—Modeling of galvanic corrosion at cladding breaks.” Corrosion 62 (10): 918–929. https://doi.org/10.5006/1.3279902.
Dafalias, Y. F., and E. P. Popov. 1975. “A model of nonlinearly hardening materials for complex loading.” Acta Mech. 21 (3): 173–192. https://doi.org/10.1007/BF01181053.
Dafalias, Y. F., and E. P. Popov. 1976a. “Plastic internal variables formalism of cyclic plasticity.” J. Appl. Mech. 43 (4): 645. https://doi.org/10.1115/1.3423948.
Dafalias, Y. F., and E. P. Popov. 1976b. “Rate-independent cyclic plasticity in a plastic internal variables formalism.” Mech. Res. Commun. 3 (1): 33–38. https://doi.org/10.1016/0093-6413(76)90079-3.
Frederick, C. O., and P. J. Armstrong. 2007. “A mathematical representation of the multiaxial Bauschinger effect.” Mater. High Temp. 24 (1): 1–26. https://doi.org/10.3184/096034007X207589.
Hill, R. 1950. The mathematical theory of plasticity. Oxford, UK: Oxford University Press.
ISO. 2017. Steel and steel products—Location and preparation of samples and test pieces for mechanical testing. ISO 377. Geneva: ISO.
Iwan, W. D. 1967. “On a class of models for the yielding behavior of continuous and composite systems.” J. Appl. Mech. 34 (3): 612–617. https://doi.org/10.1115/1.3607751.
Li, G. F., and J. Congleton. 2000. “Stress corrosion cracking of a low alloy steel to stainless steel transition weld in PWR primary waters at 292°C.” Corros. Sci. 42 (6): 1005–1021. https://doi.org/10.1016/S0010-938X(99)00131-6.
Mróz, Z. 1967. “On the description of anisotropic workhardening.” J. Mech. Phys. Solids 15 (3): 163–175. https://doi.org/10.1016/0022-5096(67)90030-0.
Mróz, Z. 1969. “An attempt to describe the behavior of metals under cyclic loads using a more general workhardening model.” Acta Mech. 7 (2–3): 199–212. https://doi.org/10.1007/BF01176668.
Nakashima, M. 1995. “Strain-hardening behavior of shear panels made of low-yield steel. I: Test.” J. Struct. Eng. 121 (12): 1742–1749. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:12(1742).
Nakashima, M., T. Akazawa, and B. Tsuji. 1995. “Strain-hardening behavior of shear panels made of low-yield steel. II: Model.” J. Struct. Eng. 121 (12): 1750–1757. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:12(1750).
Prager, W. 1956. “A new method of analyzing stresses and strains in work-hardening plastic solids.” J. Appl. Mech. 23 (4): 493–496.
Ramberg, W., and W. R. Osgood. 1943. Description of stress-strain curves by three parameters. Washington, DC: National Advisory Committee for Aeronautics.
Shen, C. 1993. Development of cyclic two-surface model for structural steels with yield plateau. Nagoya, Japan: Nagoya Univ.
Shen, C., I. H. P. Mamaghani, E. Mizuno, and T. Usami. 1995. “Cyclic behavior of structural steels. II: Theory.” J. Eng. Mech. 121 (11): 1165–1172. https://doi.org/10.1061/(ASCE)0733-9399(1995)121:11(1165).
Shen, C., E. Mizuno, and T. Usami. 1993. “A generalized cyclic plasticity model for steels with yield plateau.” In Advances in engineering plasticity and its applications, 175–182. Amsterdam, Netherlands: Elsevier.
Shen, C., Y. Tanaka, E. Mizuno, and T. Usami. 1992. “A two-surface model for steels with yield plateau.” Doboku Gakkai Ronbunshu 1992 (441): 11–20. https://doi.org/10.2208/jscej.1992.11.
Smith, L. M. 2012. Engineering with clad steel. New York: Nickel Institute.
Tseng, N. T., and G. C. Lee. 1983. “Simple plasticity model of two-surface type.” J. Eng. Mech. 109 (3): 795–810. https://doi.org/10.1061/(ASCE)0733-9399(1983)109:3(795).
Yan, J., M. Gao, and X. Zeng. 2010. “Study on microstructure and mechanical properties of 304 stainless steel joints by TIG, laser and laserTIG hybrid welding.” Opt. Lasers Eng. 48 (4): 512–517. https://doi.org/10.1016/j.optlaseng.2009.08.009.
Ziegler, H. 1959. “A modification of Prager’s hardening rule.” Q. Appl. Math. 17 (1): 55–65. https://doi.org/10.1090/qam/104405.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Nov 27, 2020
Accepted: Apr 2, 2021
Published online: Aug 23, 2021
Published in print: Nov 1, 2021
Discussion open until: Jan 23, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.