Feasibility of Using Lead–Zinc Tailings to Produce Environmentally Friendly Ceramisite
Publication: Journal of Materials in Civil Engineering
Volume 33, Issue 11
Abstract
There are large volumes of lead-zinc tailings (LZT) produced in China and elsewhere in the world. LZT disposal to the landfill is problematic and causes many environmental issues. The objective of this work is to demonstrate how LZT can be effectively used to produce ceramisite. The experimental results show that the LZT alone is not suitable for making ceramisite. When mixed with clay, it can be turned into ceramisite with ideal properties for building applications. The optimization test results reported herein show that priority order of factors affecting the compressive strength of cylinder samples is, in turn, sintering temperature sintering time () content (). The order of factors influencing the density is . The results show that the leaching content of Pb and Zn of all sintered ceramisite samples is far less than the limit values of hazardous components in the leachate specified in the relevant standard. The optimum combination of parameters to produce ceramisite is 50% LZT content, at sintering temperature of 1,150°C and sintering time of 9 min. Under the optimum conditions, the compressive strength and apparent density of ceramisite have reached 9.9 MPa and respectively. The results indicate that ceramisite can effectively be made using LTZ for civil engineering applications.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
This research acknowledges the financial support from the University of Melbourne and the Australian Research Council’s Discovery Early Career Researcher Grant (DE170100165, DE 2017 R1).
References
Anagnostopoulos, I. M., and V. E. Stivanakis. 2009. “Utilization of lignite power generation residues for the production of lightweight aggregates.” J. Hazard. Mater. 163 (1): 329–336. https://doi.org/10.1016/j.jhazmat.2008.06.125.
Cui, C. W., F. Shi, Y. G. Li, and S. Y. Wang. 2010. “Orthogonal analysis for perovskite structure microwave dielectric ceramic thin films fabricated by the RF magnetron-sputtering method.” J. Mater. Sci. 21: 349–354. https://doi.org/10.1007/s10854-009-9919-y.
Dong, J. X., Y. H. Wang, L. J. Wang, S. J. Wang, S. J. Li, and Y. Ding. 2020. “The performance of porous ceramsites in a biological aerated filter for organic wastewater treatment and simulation analysis.” J. Water Process Eng. 34 (Apr), 101134. https://doi.org/10.1016/j.jwpe.2020.101134.
Fan, L. D., Z. J. Zhang, Y. Q. Yu, P. T. Li, and T. Cosgrove. 2017. “Effect of elevated curing temperature on ceramsite concrete performance.” Construct. Build. Mater. 153 (Oct): 423–429. https://doi.org/10.1016/j.conbuildmat.2017.07.050.
Fu, J. F., G. W. Yu, and Z. G. Zhang. 2008. “The study of using fly-ash of Shougang to produce ceram.” [In Chinese.] In Proc., Forum on Metallurgical Circular Economy Development, 329–330. Beijing: Chinese Society for Metals.
Geoscience Australia. 2020. “Mineral resources and advice.” Accessed January 6, 2020. https://www.ga.gov.au/scientific-topics/minerals/mineral-resources-and-advice/australian-resource-reviews/zinc-lead-silver.
Guo, X. L., Y. D. Yao, G. F. Yin, Y. Q. Kang, Y. Luo, and L. Zhuo. 2008. “Preparation of decolorizing ceramsites for printing and dyeing wastewater with acid and base treated clay.” Appl. Clay Sci. 40 (1–4): 20–26. https://doi.org/10.1016/j.clay.2007.06.009.
He, B. F., L. A. Wang, C. Huang, L. Lu, and Z. P. Chen. 2011. “Experimental study on producing ceramsite with sewage sludge in arc blade rotary kiln.” [In Chinese.] Chin. J. Environ. Eng. 5 (4): 909–916.
Houck, M. M. 2009. “The use of spectroscopy for textile fiber identification.” In Identification of textile fibers, 158–164. Cambridge, UK: Woodhead Publishing.
Hu, J., Z. D. Qian, Y. C. Xue, and Y. M. Yang. 2020. “Investigation on fracture performance of lightweight epoxy asphalt concrete based on microstructure characteristics.” J. Mater. Civ. Eng. 28 (9): 04016084. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001594.
Lei, C., B. Yan, T. Chen, S. X. Quan, and X. M. Xiao. 2015. “Comprehensive utilization of lead–zinc tailings, part 1: Pollution characteristics and resource recovery of Sulphur.” J. Environ. Chem. Eng. 3 (2): 862–869. https://doi.org/10.1016/j.jece.2015.03.015.
Liu, Y., F. Du, L. Yuan, H. Zeng, and S. Kong. 2010. “Production of lightweight ceramisite from iron ore tailings and its performance investigation in a biological aerated filter (BAF) reactor.” J. Hazard. Mater. 178 (1–3): 999–1006. https://doi.org/10.1016/j.jhazmat.2010.02.038.
Lu, R. Z. 1986. Concrete test design and quality management. Shanghai, China: Shanghai Jiaotong University Press.
Luo, S. L. 2012. “Analysis of the use of tailings to make ceramsite.” Mod. Min. 516 (4): 134–135. https://doi.org/10.3969/j.issn.1674-6082.2012.04.050.
MHURD (Ministry of Housing and Urban-Rural Development of the People’s Republic Of China). 2009. Artifical ceramsite filter material for water treatment. CJ/T 299-2008. Beijing: MHURD.
Mohamad, N., W. I. Goh, R. Abdullah, A. A. A. Samad, P. Mendis, and M. Sofi. 2017. “Structural performance of FCS wall subjected to axial load.” Construct. Build. Mater. 134 (Mar): 185–198. https://doi.org/10.1016/j.conbuildmat.2016.12.133.
Shi, Z. W., and Q. H. Xue. 2018. “Progress on domestic investigation of building materials conversion from lead and zinc tailing.” [In Chinese.] Bull. Chin. Ceram. Soc. 37 (2): 508–511.
Sofi, M., E. Lumantarna, C. Duffield, and P. Mendis. 2017. “Effects of interior partition walls on natural period of high rise buildings.” J. Struct. Stab. Dyn. 17 (6): 1771006. https://doi.org/10.1142/S0219455417710067.
Sofi, M., Y. Sabri, Z. Zhou, and P. Mendis. 2019. “Transforming municipal solid waste into construction materials.” Sustainable 11 (9): 2661. https://doi.org/10.3390/su11092661.
Standardization Administration of China. 2007. Identification standards for hazardous wastes-identification for extraction toxicity. GB 5085.3. Beijing: Standards Press of China.
Standardization Administration of China. 2010a. Lightweight aggregates and its test methods—Part 1: Lightweight aggregates. GB/T 1743.1. Beijing: Standards Press of China.
Standardization Administration of China. 2010b. Lightweight aggregates and its test methods—Part 2: Test methods for lightweight aggregates. GB/T 1743.2. Beijing: Standards Press of China.
USGS. 2019. Mineral commodity summaries 2019. Washington, DC: USGS.
Wan, H. R. 2012. “Analysis on tailings generation and comprehensive utilization of typical lead-zinc concentration enterprises in China.” Environ. Prot. Circ. Econ. 14 (9): 40–43. https://doi.org/10.3969/j.issn.1674-1021.2012.09.013.
Wan, H. R. 2013. “Analysis on Pb-Zn tailings and red mud generation coefficient in China.” Min. Metall. 22 (2): 98–102. https://doi.org/10.3969/j.issn.1005-7854.2013.02.025.
Wang, D., J. L. Huang, H. T. Peng, and J. L. Huang. 2014. “Sinterability and expansion property of ceramsite made with lead-zinc mine tailings.” In Vol. 551 of Applied mechanics and materials, 23–27. Zurich, Switzerland: Trans Tech Publications.
Wang, J., K. Zheng, N. Cui, X. Cheng, K. Ren, P. Hou, L. Feng, Z. Zhou, and N. Xie. 2020. “Green and durable lightweight aggregate concrete: The role of waste and recycled materials.” Materials (Basel) 13 (13): 3041. https://doi.org/10.3390/ma13133041.
Wei, Y. L., and G. W. Ko. 2017. “Recycling steel wastewater sludges as raw materials for preparing lightweight aggregates.” J. Cleaner Prod. 165 (Nov): 905–916. https://doi.org/10.1016/j.jclepro.2017.07.186.
Wu, X., and D. Y. C. Leung. 2011. “Optimization of biodiesel production from camelina oil using orthogonal experiment.” Appl. Energy 88 (11): 3615–3624. https://doi.org/10.1016/j.apenergy.2011.04.041.
Xu, G. R., J. L. Zou, and G. B. Li. 2008. “Effect of sintering temperature on the characteristics of sludge ceramsite.” J. Hazard. Mater. 150 (2): 394–400. https://doi.org/10.1016/j.jhazmat.2007.04.121.
Yan, S. S., Q. H. Qian, X. W. Zhang, X. Wang, and D. L. Yang. 2018. “Development statues of ceramisite and application.” Sichuan Build. Mater. 44 (6): 1–3. https://doi.org/10.3969/j.issn.1672-4011.2018.06.001.
Yang, H., B. Zhong, and Q. Liu. 2006. Applied mathematical statistics. Beijing: Tsinghua University Press.
Yang, S. Y. 1997. “Discussion on the properties of ceramisite and its development direction.” [In Chinese.] China Non-metall. Miner. Ind. 93 (4): 14–19.
Yang, S. Y., and F. J. Yang. 2010. “Brief analysis of ceramisite (I).” [In Chinese.] Brick Tile World 7: 45–54.
Zhao, H. L., F. Liu, H. Q. Liu, L. Wang, R. Zhang, and Y. Hao. 2020. “Comparative life cycle assessment of two ceramsite production technologies for reusing municipal solid waste incinerator fly ash in China.” Waste Manage. 113 (Jul): 447–455. https://doi.org/10.1016/j.wasman.2020.06.016.
Zhou, W., Z. Q. Sun, H. W. Liu, and Y. Jiang. 2011. “Diagnosis of rational energy use in comprehensive utilization of lead-zinc tailings.” Met. Mater. Metall. Eng. 39 (2): 25–28. https://doi.org/10.3969/j.issn.1005-6084.2011.02.006.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Sep 28, 2020
Accepted: Mar 8, 2021
Published online: Aug 20, 2021
Published in print: Nov 1, 2021
Discussion open until: Jan 20, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Rui Li, Ziyi Yin, Hang Lin, Research Status and Prospects for the Utilization of Lead–Zinc Tailings as Building Materials, Buildings, 10.3390/buildings13010150, 13, 1, (150), (2023).