Influence of Confinement Pressure on the Mechanical Response of Emulsified Cold-Recycled Mixtures
Publication: Journal of Materials in Civil Engineering
Volume 33, Issue 11
Abstract
Cold recycling of asphalt pavement is an effective rehabilitation technique in terms of saving natural resources and cost of construction. The current study focuses on cold-recycled asphalt mixture designated as emulsified cold-recycled mixture (ECRM) that contains 100% reclaimed asphalt pavement material and slow-setting asphalt emulsion. Here, a repeated haversine compression test is conducted with and without confinement pressure at six temperatures (0°C, 10°C, 20°C, 30°C, 40°C, and 50°C) and 10 frequencies (25, 20, 10, 5, 2, 1, 0.5, 0.2, 0.1, and 0.01 Hz). The stress–strain–time response of ECRM is investigated, and it is observed that the influence of confinement pressure is negligible in the temperature range of 0°C–10°C, whereas it is significant at temperature 30°C and higher, irrespective of the frequency of loading. However, at 20°C, the influence of confinement pressure is negligible at higher frequencies (25–10 Hz), and it is significant at lower frequencies (less than 10 Hz). The viscoelastic response of ECRM is seen at all temperature, frequency, and confinement conditions of loading from the analyzed Lissajous plots. The dynamic modulus and phase angle are computed using the regression and the fast Fourier-transform (FFT) methods. The dynamic modulus and phase angle master curve is then generated using a free-shifting approach and a model-based approach. The model-based approach involves the numerical solution of the exact Kramers–Kronig relations combined with the generalized logistic sigmoidal model. The FFT-based dynamic modulus is used to construct a master curve with the generalized logistic sigmoidal model. Such a model-based master curve resulted in excellent predictive capabilities for dynamic modulus, and hence it is suggested for ECRM.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors thank the IIT Madras Research Park, Chennai, India for facilitating an ecosystem for such Industry-Academia collaboration.
References
AASHTO. 2014. Standard method of test for resistance of compacted hot mix asphalt (HMA) to moisture-induced damage. AASHTO T 283. Washington, DC: AASHTO.
AASHTO. 2017a. Determining the dynamic modulus and flow number for asphalt mixtures using the asphalt mixture performance tester (AMPT). AASHTO T 378. Washington, DC: AASHTO.
AASHTO. 2017b. Standard specification for materials for cold recycled mixtures with emulsified asphalt. AASHTO MP 31. Washington, DC: AASHTO.
AASHTO. 2018. Standard method of test for determining the asphalt binder content of hot mix asphalt (HMA) by the Ignition method. AASHTO T 308. Washington, DC: AASHTO.
AASHTO. 2020. Standard practice for emulsified asphalt content of cold recycled mixture designs. AASHTO PP 86. Washington, DC: AASHTO.
Ameri, M., and A. Behnood. 2012. “Laboratory studies to investigate the properties of CIR mixes containing steel slag as a substitute for virgin aggregates.” Constr. Build. Mater. 26 (1): 475–480. https://doi.org/10.1016/j.conbuildmat.2011.06.047.
ARRA (Asphalt Recycling & Reclaiming Association). 2001. Basic asphalt recycling manual. Annapolis, MD: ARRA.
ASTM. 2015. Bulk specific gravity and density of compacted bituminous mixtures using coated samples. ASTM D1188. West Conshohocken, PA: ASTM.
ASTM. 2018. Standard test method for maximum specific gravity and density of bituminous paving mixtures using automatic vacuum sealing method. ASTM D6857. West Conshohocken, PA: ASTM.
BIS (Bureau of Indian Standards). 2017. Bitumen emulsion for roads (cationic type). IS 8887-17. New Delhi, India: BIS.
BIS (Bureau of Indian Standards). 2018. Paving bitumen—Specification. IS 73-13. New Delhi, India: BIS.
Bocci, M., A. Grilli, F. Cardone, and A. Graziani. 2011. “A study on the mechanical behaviour of cement–bitumen treated materials.” Constr. Build. Mater. 25 (2): 773–778. https://doi.org/10.1016/j.conbuildmat.2010.07.007.
Bonaquist, R. F., D. W. Christensen, and W. Stump. 2003. Simple performance tester for superpave mix design: First-article development and evaluation. Washington, DC: National Cooperative Highway Research Program, Transportation Research Board, National Research Council.
Booij, H. C., and G. Thoone. 1982. “Generalization of Kramers-Kronig transforms and some approximations of relations between viscoelastic quantities.” Rheol. Acta 21 (1): 15–24. https://doi.org/10.1007/BF01520701.
Cizkova, Z., and J. Suda. 2017. “Viscoelastic behaviour of cold recycled asphalt mixes.” IOP Conf. Ser.: Mater. Sci. Eng. 236 (1): 012017. https://doi.org/10.1088/1757-899X/236/1/012017.
Cohen, E., A. Sidess, and G. Zoltan. 1989. “Performance of a full-scale pavement using cold recycled asphalt mixture.” Transp. Res. Rec. 1228 (1): 88–93.
Cross, S. A., and Y. Jakatimath. 2007. Evaluation of cold in-place recycling for rehabilitation of transverse cracking on US 412. Oklahoma City: Oklahoma DOT.
Deepa, S., U. Saravanan, and J. M. Krishnan. 2019. “On measurement of dynamic modulus for bituminous mixtures.” Int. J. Pavement Eng. 20 (9): 1073–1089. https://doi.org/10.1080/10298436.2017.1380809.
Diefenderfer, B. K., B. F. Bowers, C. W. Schwartz, A. Farzaneh, and Z. Zhang. 2016. “Dynamic modulus of recycled pavement mixtures.” Transp. Res. Rec. 2575 (1): 19–26. https://doi.org/10.3141/2575-03.
Ebels, L.-J. 2008. “Characterization of material properties and behaviour of cold bituminous mixtures for road pavements.” Ph.D. thesis, Dept. of Civil Engineering, Stellenbosch Univ.
Findley, W. N., J. S. Lai, and K. Onaran. 1989. Creep and relaxation of nonlinear viscoelastic materials’ with an introduction to linear viscoelasticity. New York: Dover Publications.
Flores, G., J. Gallego, L. Miranda, and J. R. Marcobal. 2020. “Cold asphalt mix with emulsion and 100% rap: Compaction energy and influence of emulsion and cement content.” Constr. Build. Mater. 250 (Jul): 118804. https://doi.org/10.1016/j.conbuildmat.2020.118804.
Godenzoni, C., A. Graziani, E. Bocci, and M. Bocci. 2018. “The evolution of the mechanical behaviour of cold recycled mixtures stabilized with cement and bitumen: Field and laboratory study.” Road Mater. Pavement Des. 19 (4): 856–877. https://doi.org/10.1080/14680629.2017.1279073.
Gómez-Meijide, B., and I. Pérez. 2015. “Nonlinear elastic behavior of bitumen emulsion-stabilized materials with C&D waste aggregates.” Constr. Build. Mater. 98 (Nov): 853–863. https://doi.org/10.1016/j.conbuildmat.2015.07.004.
Graziani, A., C. Mignini, E. Bocci, and M. Bocci. 2020. “Complex modulus testing and rheological modeling of cold-recycled mixtures.” J. Test. Eval. 48 (1): 120–133. https://doi.org/10.1520/JTE20180905.
Gu, F., W. Y. Ma, R. C. West, A. J. Taylor, and Y. Q. Zhang. 2019. “Structural performance and sustainability assessment of cold central-plant and in-place recycled asphalt pavements: A case study.” J. Cleaner Prod. 208 (Jan): 1513–1523. https://doi.org/10.1016/j.jclepro.2018.10.222.
Kavussi, A., and A. Modarres. 2010. “A model for resilient modulus determination of recycled mixes with bitumen emulsion and cement from ITS testing results.” Constr. Build. Mater. 24 (11): 2252–2259. https://doi.org/10.1016/j.conbuildmat.2010.04.031.
Kim, Y., and H. D. Lee. 2012. “Performance evaluation of cold in-place recycling mixtures using emulsified asphalt based on dynamic modulus, flow number, flow time, and raveling loss.” KSCE J. Civ. Eng. 16 (4): 586–593. https://doi.org/10.1007/s12205-012-1376-0.
Kuchiishi, A. K., C. C. D. Santos Antão, K. Vasconcelos, and L. L. B. Bernucci. 2019a. “Influence of viscoelastic properties of cold recycled asphalt mixtures on pavement response by means of temperature instrumentation.” Supplement, Road Mater. Pavement Des. 20 (S2): S710–S724. https://doi.org/10.1080/14680629.2019.1633781.
Kuchiishi, A. K., K. Vasconcelos, and L. L. Bariani Bernucci. 2019b. “Effect of mixture composition on the mechanical behaviour of cold recycled asphalt mixtures.” Int. J. Pavement Eng. https://doi.org/10.1080/10298436.2019.1655564.
Lakes, R. 2009. Viscoelastic materials. New York: Cambridge University Press.
Leandri, P., M. Losa, and A. Di Natale. 2015. “Field validation of recycled cold mixes viscoelastic properties.” Constr. Build. Mater. 75 (Jan): 275–282. https://doi.org/10.1016/j.conbuildmat.2014.11.028.
Li, Y., Y. Lyv, L. Fan, and Y. Zhang. 2019. “Effects of cement and emulsified asphalt on properties of mastics and 100% cold recycled asphalt mixtures.” Materials (Basel) 12 (5): 754. https://doi.org/10.3390/ma12050754.
Lin, J. T., J. X. Hong, and Y. Xiao. 2017. “Dynamic characteristics of 100% cold recycled asphalt mixture using asphalt emulsion and cement.” J. Cleaner Prod. 156 (Jul): 337–344. https://doi.org/10.1016/j.jclepro.2017.04.065.
Liu, H., and R. Luo. 2017. “Development of master curve models complying with linear viscoelastic theory for complex moduli of asphalt mixtures with improved accuracy.” Constr. Build. Mater. 152 (Oct): 259–268. https://doi.org/10.1016/j.conbuildmat.2017.06.143.
M-E PDG (Mechanistic-Empirical Pavement Design Guide). 2004. NCHRP-Guide for mechanistic-empirical design of new and rehabilitated pavement structures. Washington, DC: National Cooperative Highway Research Program, Transportation Research Board, National Research Council.
Modarres, A., and P. Ayar. 2016. “Comparing the mechanical properties of cold recycled mixture containing coal waste additive and ordinary Portland cement.” Int. J. Pavement Eng. 17 (3): 211–224. https://doi.org/10.1080/10298436.2014.979821.
Naderi, K., F. M. Nejad, and A. Khodaii. 2018. “Time-temperature-age superposition validation for linear viscoelastic properties of bituminous materials.” J. Mater. Civ. Eng. 30 (2): 04017292. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002162.
Niazi, Y., and M. Jalili. 2009. “Effect of Portland cement and lime additives on properties of cold in-place recycled mixtures with asphalt emulsion.” Constr. Build. Mater. 23 (3): 1338–1343. https://doi.org/10.1016/j.conbuildmat.2008.07.020.
Nivedya, M. K., A. Veeraragavan, R. Parag, and J. M. Krishnan. 2018. “Investigation on the influence of air voids and active filler on the mechanical response of bitumen stabilized material.” J. Mater. Civ. Eng. 30 (3): 04017293. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001967.
Omrani, M. A., and A. Modarres. 2019. “Stiffness and fatigue behavior of emulsified cold recycled mixture containing waste powder additives: Mechanical and microstructural analysis.” J. Mater. Civ. Eng. 31 (6): 04019061. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002704.
Parot, J. M., and B. Duperray. 2007. “Applications of exact causality relationships to materials dynamic analysis.” Mech. Mater. 39 (5): 419–433. https://doi.org/10.1016/j.mechmat.2006.07.004.
Pérez, I., L. Medina, and M. Á. del Val. 2013. “Mechanical properties and behaviour of in situ materials which are stabilised with bitumen emulsion.” Road Mater. Pavement Des. 14 (2): 221–238. https://doi.org/10.1080/14680629.2013.779301.
Raschia, S., C. Mignini, A. Graziani, A. Carter, D. Perraton, and M. Vaillancourt. 2019. “Effect of gradation on volumetric and mechanical properties of cold recycled mixtures (CRM).” Supplement, Road Mater. Pavement Des. 20 (S2): S740–S754. https://doi.org/10.1080/14680629.2019.1633754.
Rouleau, L., J. F. Deu, A. Legay, and F. Le Lay. 2013. “Application of Kramers-Kronig relations to time-temperature superposition for viscoelastic materials.” Mech. Mater. 65 (Oct): 66–75. https://doi.org/10.1016/j.mechmat.2013.06.001.
Rowe, G., G. Baumgardner, and M. Sharrock. 2008. “A generalized logistic function to describe the master curve stiffness properties of binder mastics and mixtures.” In Proc., 45th Petersen Asphalt Research Conf. Laramie, WY: Western Research Institute.
Rowe, G., G. Baumgardner, and M. Sharrock. 2009. “Functional forms for master curve analysis of bituminous materials.” In Advanced testing and characterization of bituminous materials, 97–108. Boca Raton, FL: CRC Press.
Roy, N., A. Veeraragavan, P. Jain, and J. M. Krishnan. 2013. “A re-look at the asphalt mixture performance test protocols and computational algorithms.” J. Test. Eval. 41 (5): 729–744. https://doi.org/10.1520/JTE20120229.
Santagata, E., G. Chiappinelli, P. P. Riviera, and O. Baglieri. 2010. “Triaxial testing for the short term evaluation of cold-recycled bituminous mixtures.” Road Mater. Pavement Des. 11 (1): 123–147. https://doi.org/10.1080/14680629.2010.9690263.
Sun, Y., B. Huang, J. Chen, X. Shu, and Y. Li. 2017. “Characterization of triaxial stress state linear viscoelastic behavior of asphalt concrete.” J. Mater. Civ. Eng. 29 (4): 04016259. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001776.
Thomas, T. W., and R. W. May. 2007. “Mechanistic-empirical design guide modeling of asphalt emulsion full-depth reclamation mixes.” In Proc., 86th Annual Meeting of the Transportation Research Board. Washington, DC: Transportation Research Board.
UTS006 (Universal Testing Software 006). 2007. SPT dynamic modulus test software reference. Melbourne, VIC, Australia: IPC Global.
Yan, J., Z. Zhang, S. Charmot, W. Ding, and F. Li. 2015. “Investigation and prediction model for the dynamic modulus of asphalt emulsion cold recycled mixtures.” J. Mater. Civ. Eng. 27 (1): 04014113. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001048.
Yang, X., and Z. You. 2015. “New predictive equations for dynamic modulus and phase angle using a nonlinear least-squares regression model.” J. Mater. Civ. Eng. 27 (3): 04014131. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001070.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Aug 7, 2020
Accepted: Feb 2, 2021
Published online: Aug 20, 2021
Published in print: Nov 1, 2021
Discussion open until: Jan 20, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.