Mechanical Behavior and Constitutive Modeling of Cement–Bentonite Mixtures for Cutoff Walls
Publication: Journal of Materials in Civil Engineering
Volume 33, Issue 3
Abstract
Cement–bentonite mixtures are commonly used to build cutoff walls, which limit water flow and underground transport of pollutants. These artificial materials are employed due to their very low permeability and adequate shear strength and ductility. In this paper, experimental results about the microstructure and mechanical behavior of three different cement–bentonite mixtures are presented. Specimens of these mixtures were subjected to oedometer and consolidated-undrained triaxial tests. These results were then used as a basis for the definition of a suitable constitutive framework. A quite good reproduction of the experimental results up to the peak strength was obtained using the classical Modified Cam Clay model, which could then be used satisfactorily when conventional analyses aimed at assessing the stability of cutoff walls are required. The reproduction of the strength degradation and the strains occurring in the postpeak stage requires, however, a more advanced constitutive model. To this extent, the Modified Cam Clay framework was enhanced by introducing some features commonly employed to reproduce the mechanical behavior of granular materials. This model may be useful for the real-scale analysis of more critical cases when local failure mechanisms are likely to occur and may influence the functionality of the wall.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request. These include:
•
numerical results of the simulations plotted in the paper;
•
experimental data plotted in the paper; and
•
numerical code for the integration of the constitutive law.
Acknowledgments
The activity of the first author was financed in the context of the public administration agreement between Politecnico di Milano - Department of Civil and Environmental Engineering and the Italian Ministry of Economic Development, Direzione Generale per la Sicurezza anche Ambientale delle Attività Minerarie ed Energetiche–Ufficio Nazionale Minerario per gli Idrocarburi e le Georisorse–Programme Clypea, which is here gratefully acknowledged.
References
ASTM 2014. Standard test methods for specific gravity of soil solids by water pycnometer. ASTM D854-14. West Conshohocken, PA: ASTM.
ASTM 2019. Standard test methods for laboratory determination of water (moisture) content of soil and rock by mass. ASTM D2216-19. West Conshohocken, PA: ASTM.
Atkinson, J. H., and P. L. Bransby. 1978. The mechanics of soils: An introduction to critical state soil mechanics. New York: McGraw-Hill.
Azizi, A., G. Musso, and C. Jommi. 2020. “Effects of repeated hydraulic loads on microstructure and hydraulic behaviour of a compacted clayey silt.” Can. Geotech. J. 57 (1): 100–114. https://doi.org/10.1139/cgj-2018-0505.
Been, K., and M. G. Jefferies. 1985. “A state parameter for sands.” Géotechnique 35 (2): 99–112. https://doi.org/10.1680/geot.1985.35.2.99.
Carreto, J. M. R., L. M. M. S. Caldeira, and E. J. L. M. D. Neves. 2016. “Hydromechanical characterization of cement-bentonite slurries in the context of cutoff wall applications.” J. Mater. Civ. Eng. 28 (2): 04015093. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001365.
Dafalias, Y. F., and M. T. Manzari. 2004. “Simple plasticity sand model accounting for fabric change effects.” J. Eng. Mech. 130 (6): 622–634. https://doi.org/10.1061/(ASCE)0733-9399(2004)130:6(622).
Delage, P., and F. Pellerin. 1984. “Influence de la lyophilisation sur la structure d’une argile sensible du Québec.” Clay Miner. 19 (2): 151–160. https://doi.org/10.1180/claymin.1984.019.2.03.
Jefferis, S. 2012. “Cement-bentonite slurry systems.” In Grouting and Deep Mixing 2012, Geotechnical Special Publication 228, edited by L. F. Johnsen, D. A. Bruce, and M. J. Byle, 1–24. Reston, VA: ASCE.
Jefferis, S. A. 1981. “Bentonite-cement slurries for hydraulic cut-offs.” In Vol. 1 of Proc., 10th Int. Conf. on Soil Mechanics and Foundation Engineering, 435–440. Rotterdam, Netherlands: A.A. Balkema.
Joshi, K., C. Kechavarzi, K. Sutherland, M. Y. A. Ng, K. Soga, and P. Tedd. 2010. “Laboratory and in situ tests for long-term hydraulic conductivity of a cement-bentonite cutoff wall.” J. Geotech. Geoenviron. Eng. 136 (4): 562–572. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000248.
Kang, X., G. C. Kang, K. T. Chang, and L. Ge. 2015. “Chemically stabilized soft clays for road-base construction.” J. Mater. Civ. Eng. 27 (7): 04014199. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001156.
Li, X. S., and Y. F. Dafalias. 2000. “Dilatancy for cohesionless soils.” Géotechnique 50 (4): 449–460. https://doi.org/10.1680/geot.2000.50.4.449.
Manzari, M. T., and Y. F. Dafalias. 1997. “A critical state two-surface plasticity model for sands.” Géotechnique 47 (2): 255–272. https://doi.org/10.1680/geot.1997.47.2.255.
Miura, N., S. Horpibulsuk, and T. Nagarj. 2001. “Engineering behavior of cement stabilized clay at high water content.” Soils Found. 41 (5): 33–45. https://doi.org/10.3208/sandf.41.5_33.
Musso, G., A. Azizi, and C. Jommi. 2020a. “A microstructure-based elastoplastic model to describe the behaviour of a compacted clayey silt in isotropic and triaxial compression.” Can. Geotech. J. 57 (7): 1025–1043. https://doi.org/10.1139/cgj-2019-0176.
Musso, G., A. Zibisco, R. M. Cosentini, P. Trischitta, and G. Della Vecchia. 2020b. “Monitoring drying and wetting of a cement bentonite mixture with electrical resistivity tomography.” In Proc., 4th European Conf. on Unsaturated Soil Mechanics, edited by R. Cardoso, C. Jommi, and E. Romero. Les Ulis, France: EDP Sciences.
Opdyke, S. M., and J. C. Evans. 2005. “Slag-cement-bentonite slurry walls.” J. Geotech. Geoenviron. Eng. 131 (6): 673–681. https://doi.org/10.1061/(ASCE)1090-0241(2005)131:6(673).
Plee, D., F. Lebedenko, F. Obrecht, M. Letellier, and H. Van Damme. 1990. “Microstructure, permeability and rheology of bentonite–cement slurries.” Cem. Concr. Res. 20 (1): 45–61. https://doi.org/10.1016/0008-8846(90)90115-E.
Roscoe, K., and J. B. Burland. 1968. “On the generalized stress-strain behaviour of wet clay.” In Engineering plasticity, 535–609. Cambridge, UK: Cambridge University Press.
Royal, A., Y. Makhover, S. Moshirian, and D. Hesami. 2013. “Investigation of cement–bentonite slurry samples containing PFA in the UCS and triaxial apparatus.” Geotech. Geol. Eng. 31 (2): 767–781. https://doi.org/10.1007/s10706-013-9626-6.
Royal, A., A. Opukumo, C. Qadr, L. Perkins, and M. Walenna. 2018. “Deformation and compression behaviour of a cement–bentonite slurry for groundwater control applications.” Geotech. Geol. Eng. 36 (2): 835–853. https://doi.org/10.1007/s10706-017-0359-9.
Soga, K., K. Joshi, and J. Evans. 2013. “Cement bentonite cutoff walls for polluted sites.” In Proc., 1st Int. Symp. on Coupled Phenomena in Geotechnical Engineering, edited by M. Manassero, A. Dominijanni, S. Foti, and G. Musso, 149–165. London: Taylor & Francis.
Tarzia, S. 2018. “Hydraulic behaviour of cement bentonite mixtures.” [In Italian.] M.Sc. thesis, Dept. of Structural, Geotechnical and Building Engineering, Politecnico di Torino.
Trischitta, P., R. M. Cosentini, G. Della Vecchia, G. Sanetti, and G. Musso. 2020. “Preliminary investigation on the water retention behaviour of cement bentonite mixtures.” In Proc., 4th European Conf. on Unsaturated Soil Mechanics, edited by R. Cardoso, C. Jommi, and E. Romero. Les Ulis, France: EDP Sciences.
van Olphen, H. 1977. An introduction to clay colloid chemistry, for clay technologists, geologists, and soil scientists. 2nd ed. New York: Wiley.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Apr 30, 2020
Accepted: Jul 27, 2020
Published online: Dec 21, 2020
Published in print: Mar 1, 2021
Discussion open until: May 21, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.