Rheological Interference of Amine and Silane–Based Antistripping Agents on Crumb Rubber–Modified Binder
Publication: Journal of Materials in Civil Engineering
Volume 32, Issue 2
Abstract
Liquid antistripping agents are added to asphalt binder to improve moisture resistance of the mixture. However, the chemical makeup and bonding mechanism of antistripping agents may cause significant effects on binder rheology. This paper investigates the effects of two different liquid antistripping agents, one amine based and another silane based, on the rheological properties of crumb rubber–modified binder CRMB60. Rheological properties determined included rotational viscosity, performance grade (PG), percent recovery, nonrecoverable creep compliance, creep stiffness, and rate of relaxation. The number of cycles to fatigue failure aided in evaluating the fatigue life. The results show that the addition of antistripping agents caused a decrease in rotational viscosity of CRMB60. Moreover, the silane antistripping agent was observed to cause a bump in high-temperature PG, whereas low-temperature PG remained unaffected by both antistripping agents. The multiple stress creep and recovery (MSCR) analysis exhibited that the silane antistripping agent increased the percent recovery and decreased the nonrecoverable creep compliance, whereas the contrary trend was observed with addition of the amine antistripping agent. Both the amine and silane antistripping agents caused a significant decrease in the fatigue life of CRMB60. Additionally, minor effect was observed on low-temperature cracking performance by both the amine and silane antistripping agents up to a certain temperature below which the cracking exacerbates. Overall, it was concluded that antistripping agents affect the rheology of CRMB60 and should be given due consideration prior to adopting a particular antistripping agent.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to thank Industrial Research and Consultancy Centre (IRCC), IIT Bombay, for providing financial support through project No. 13IRCCSG002, to purchase the dynamic shear rheometer instrument utilized in the research work. Also, the authors gratefully acknowledge the financial support of the Department of Civil Engineering, IIT Bombay, for procuring various instruments (RTFO, PAV, and BBR).
References
AASHTO. 2010. Specification for performance-graded asphalt binder using multiple stress creep recovery (MSCR) test. AASHTO MP19. Washington, DC: AASHTO.
AASHTO. 2014. Estimating damage tolerance of asphalt binders using the linear amplitude sweep. AASHTO TP101. Washington, DC: AASHTO.
Amirkhanian, S. N., F. Xiao, and M. Corley. 2018. Laboratory performance of liquid anti-stripping agents in asphalt mixtures used in South Carolina. Washington, DC: Dept. of Transportation.
Arabani, M., S. A. Tahami, and G. H. Hamedi. 2018. “Performance evaluation of dry process crumb rubber-modified asphalt mixtures with nanomaterial.” Road Mater. Pavement Des. 19 (5): 1241–1258. https://doi.org/10.1080/14680629.2017.1302356.
ASTM. 2012. Standard test method for effect of heat and air on a moving film of asphalt (Rolling Thin-Film Oven Test). ASTM D2872. West Conshohocken, PA: ASTM.
ASTM. 2013. Standard test method for penetration of bituminous materials. ASTM D5/D5M. West Conshohocken, PA: ASTM.
ASTM. 2014. Standard test method for softening point of bitumen (Ring-and-Ball Apparatus). ASTM D36/D36M. West Conshohocken, PA: ASTM.
ASTM. 2015a. Standard test method for multiple stress creep and recovery (MSCR) of Asphalt Binder using a dynamic shear rheometer. ASTM D7405. West Conshohocken, PA: ASTM.
ASTM. 2015b. Standard test method for viscosity determination of Asphalt at elevated temperatures using a rotational viscometer. ASTM D4402/D4402M. West Conshohocken, PA: ASTM.
ASTM. 2016a. Standard specification for performance graded asphalt binder. ASTM D6373. West Conshohocken, PA: ASTM.
ASTM. 2016b. Standard test method for determining the flexural creep stiffness of Asphalt Binder using the bending beam rheometer (BBR). ASTM D6648-08. West Conshohocken, PA: ASTM.
ASTM. 2018a. Standard practice for accelerated aging of asphalt binder using a pressurized aging vessel (PAV). ASTM D6521. West Conshohocken, PA: ASTM.
ASTM. 2018b. Standard test method for elastic recovery of Asphalt materials by ductilometer. ASTM D6084/D6084M. West Conshohocken, PA: ASTM.
ASTM. 2018c. Standard test method for flash and fire points by cleveland open cup tester. ASTM D92. West Conshohocken, PA: ASTM.
BIS (Bureau of Indian Standards). 2004. Polymer and rubber modified bitumen–specification. IS 15462. New Delhi, India: BIS.
Curtis, C. W. 1990. A literature review of liquid antistripping and tests for measuring stripping. Washington, DC: National Research Council.
DiVito, J. A., and G. R. Morris. 1982. Silane pretreatment of mineral aggregate to prevent stripping in flexible pavements. Washington DC: Transportation Research Board.
Guo, X., M. Sun, W. Dai, and S. Chen. 2016. “Performance characteristics of silane silica modified asphalt.” Adv. Mater. Sci. Eng. 2016: 7.
Harnish, C. I. 2010. Liquid anti-strip technology & best practices. Overland Park, KS: North Central Asphalt User/Production Group.
Kennedy, T. W., and W. V. Ping. 1991. “Comparison study of moisture damage test methods for evaluating antistripping treatments in asphalt mixtures.” Transp. Res. Rec. 1323: 94–111.
Kim, S., S. J. Lee, Y. B. Yun, and K. W. Kim. 2014. “The use of CRM-modified asphalt mixtures in Korea: Evaluation of high and ambient temperature performance.” Constr. Build. Mater. 67 (Sep): 244–248. https://doi.org/10.1016/j.conbuildmat.2014.02.074.
Lu, Q., and J. Harvey. 2006. “Long-term effectiveness of antistripping additives: Laboratory evaluation.” Transp. Res. Rec. 1970 (1): 14–24. https://doi.org/10.1177/0361198106197000102.
Mansourkhaki, A., and A. Aghasi. 2019. “Performance of rubberized asphalt containing liquid nanomaterial anti-strip agent.” Constr. Build. Mater. 214 (Jul): 468–474. https://doi.org/10.1016/j.conbuildmat.2019.03.071.
Marasteanu, M., R. Velasquez, A. C. Falchetto, and A. Zofka. 2009. Development of a simple test to determine the low temperature creep compliance of asphalt mixtures. Washington, DC: Innovations Deserving Exploratory Analysis Programs.
Mirzababaei, P., F. Moghadas Nejad, and K. Naderi. 2018. “Effect of liquid silane-based anti-stripping additives on rheological properties of asphalt binder and hot mix asphalt moisture sensitivity.” Road Mater. Pavement Des. 1–16. https://doi.org/10.1080/14680629.2018.1507920.
Moriguchi, K. 2012. Silane: Chemistry, applications and performance. New York: Nova Science Publishers.
Nazirizad, M., A. Kavussi, and A. Abdi. 2015. “Evaluation of the effects of anti-stripping agents on the performance of asphalt mixtures.” Constr. Build. Mater. 84 (Jun): 348–353. https://doi.org/10.1016/j.conbuildmat.2015.03.024.
Nejad, F. M., A. R. Azarhoosh, G. H. Hamedi, and M. J. Azarhoosh. 2012. “Influence of using nonmaterial to reduce the moisture susceptibility of hot mix asphalt.” Constr. Build. Mater. 31 (Jun): 384–388. https://doi.org/10.1016/j.conbuildmat.2012.01.004.
Park, D. W., W. J. Seo, J. Kim, and H. V. Vo. 2017. “Evaluation of moisture susceptibility of asphalt mixture using liquid anti-stripping agents.” Constr. Build. Mater. 144 (Jul): 399–405. https://doi.org/10.1016/j.conbuildmat.2017.03.214.
Plueddemann, E. P. 1991. Chemistry of silane coupling agents. In Silane coupling agents, 31–54. Boston: Springer.
Punith, V. S., F. Xiao, and S. N. Amirkhanian. 2012. “Effects of lime content on moisture susceptibility of rubberized stone matrix asphalt mixtures using warm mix additives in terms of statistical analysis.” J. Mater. Civ. Eng. 24 (12): 1431–1440. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000525.
Rahman, M., G. Airey, and A. Collop. 2010. “Moisture susceptibility of high and low compaction dry process crumb rubber-modified asphalt mixtures.” Transp. Res. Rec. 2180 (1): 121–129. https://doi.org/10.3141/2180-14.
Singh, D., V. Mishra, S. B. Girimath, A. K. Das, and B. Rajan. 2019. “Evaluation of rheological and moisture damage properties of crumb rubber–Modified Asphalt Binder.” Adv. Civil Eng. Mater. 8 (1): 20190045. https://doi.org/10.1520/ACEM20190045.
Tang, J., C. Zhu, H. Zhang, G. Xu, F. Xiao, and S. Amirkhanian. 2019. “Effect of liquid ASAs on the rheological properties of crumb rubber modified asphalt.” Constr. Build. Mater. 194 (Jan): 238–246. https://doi.org/10.1016/j.conbuildmat.2018.11.028.
Togunde, O. P. 2008. “Low temperature investigations on asphalt binder performance—A case study on Highway 417 Trial Sections.” Doctoral dissertation, Dept. of Chemistry, Queen’s Univ. Kingston.
Xiao, F., W. Zhao, T. Gandhi, and S. N. Amirkhanian. 2010. “Influence of antistripping additives on moisture susceptibility of warm mix asphalt mixtures.” J. Mater. Civ. Eng. 22 (10): 1047–1055. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000111.
Xie, Y., C. A. Hill, Z. Xiao, H. Militz, and C. Mai. 2010. “Silane coupling agents used for natural fiber/polymer composites: A review.” Composites Part A 41 (7): 806–819. https://doi.org/10.1016/j.compositesa.2010.03.005.
Zhu, C., G. Xu, H. Zhang, F. Xiao, S. Amirkhanian, and C. Wu. 2018. “Influence of different anti-stripping agents on the rheological properties of asphalt binder at high temperature.” Constr. Build. Mater. 164 (Mar): 317–325. https://doi.org/10.1016/j.conbuildmat.2017.12.236.
Ziari, H., P. Mirzababaei, and R. Babagoli. 2016. “Properties of bituminous mixtures modified with a nano-organosilane additive.” Pet. Sci. Technol. 34 (4): 386–393. https://doi.org/10.1080/10916466.2015.1136948.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Feb 26, 2019
Accepted: Jul 3, 2019
Published online: Nov 28, 2019
Published in print: Feb 1, 2020
Discussion open until: Apr 28, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.