Waterproof and Antiscour Properties of Asphalt-Based Composite Seals for Airfield Base Layer
Publication: Journal of Materials in Civil Engineering
Volume 32, Issue 1
Abstract
A new type of three-layer waterproof structure was developed to reduce the scour problem of concrete slabs by paving an asphalt-based composite seal layer between the cement-stabilized base and the cement concrete pavement. The asphalt-based composite seal layer consists of an upper layer (microsurfacing), a transition layer (microsurfacing), and a bottom layer (synchronous chip seal). A new construction method was proposed to guide the construction of the asphalt-based composite seal layer. The waterproof and antiscouring properties of the asphalt-based composite seal layer were evaluated by a permeability test, a high-resolution industrial computed tomography (CT) scanner, a scouring test, and a direct shear test. The permeability test showed that the three-layer structure possessed good waterproofing properties. The CT scans results showed that the asphalt-based composite seal layer was very dense due to effective compaction during the construction process. The scouring test indicated that the scouring resistance of the asphalt-based composite seal layer was much better than that of the cement-stabilized base. The results showed that the asphalt-based composite seal possessed decent resistance to scour and could effectively protect the base from the threat of scour. The cost analysis results showed that the proposed asphalt-based composite seal layer has a more competitive unit price compared with an asphalt concrete layer.
Get full access to this article
View all available purchase options and get full access to this article.
References
Byström, J., L. Overmann, and L. Ericsson. 1996. “Geosynthetic containment beneath Stockholm-Arlanda airport.” Geotext. Geomembr. 14 (3–4): 201–205.
Chinese Standards. 2004a. Technical specifications for construction of highway asphalt pavements. JTG T 0971. Beijing: Standardization Administration of China.
Chinese Standards. 2004b. Technical specifications for construction of highway asphalt pavements. JTG T 2000. Beijing: Standardization Administration of China.
Chinese Standards. 2004c. Technical specifications for construction of highway asphalt pavements. JTG T 0964-2008. Beijing: Standardization Administration of China.
Chinese Standards. 2011a. Standard test methods of Bitumen and Bituminous mixtures for highway engineering. JTG T 0304. Beijing: Standardization Administration of China.
Chinese Standards. 2011b. Standard test methods of Bitumen and Bituminous mixtures for highway engineering. JTG T 0312. Beijing: Standardization Administration of China.
Chinese Standards. 2011c. Standard test methods of Bitumen and Bituminous mixtures for highway engineering. JTG T 0658. Beijing: Standardization Administration of China.
Chinese Standards. 2011d. Standard test methods of Bitumen and Bituminous mixtures for highway engineering. JTG T 0652. Beijing: Standardization Administration of China.
Chinese Standards. 2011e. Standard test methods of Bitumen and Bituminous mixtures for highway engineering. JTG T 0622. Beijing: Standardization Administration of China.
Chinese Standards. 2011f. Standard test methods of Bitumen and Bituminous mixtures for highway engineering. JTG T 0651. Beijing: Standardization Administration of China.
Chinese Standards. 2011g. Standard test methods of Bitumen and Bituminous mixtures for highway engineering. JTG T 0604. Beijing: Standardization Administration of China.
Chinese Standards. 2011h. Standard test methods of Bitumen and Bituminous mixtures for highway engineering. JTG T 0605. Beijing: Standardization Administration of China.
Chinese Standards. 2011i. Standard test methods of Bitumen and Bituminous mixtures for highway engineering. JTG T 0655. Beijing: Standardization Administration of China.
De Brito, J., A. Pereira, and J. Correia. 2005. “Mechanical behaviour of non-structural concrete made with recycled ceramic aggregates.” Cem. Concr. Compos. 27 (4): 429–433. https://doi.org/10.1016/j.cemconcomp.2004.07.005.
Duan, D. J. 2012. “Application of synchronous chip seal course in large bridges.” Adv. Mater. Res. 482: 1073–1077. https://doi.org/10.4028/www.scientific.net/AMR.482-484.1073.
Dunn, C. 1998. “Modified chip seal surface treatment vs. Conventional chip seal surface treatments.” J. Vibr. Control 20 (8): 1163–1175.
Gopalakrishnan, K., M. R. Thompson, and A. Manik. 2006. “Rapid finite-element based airport pavement moduli solutions using neural networks.” Int. J. Comput. Intell. 3 (1): 63–71.
Hakim, B. A. 1997. An improved back calculation method to predict flexible pavement layers moduli and bonding condition between wearing course and base course. Liverpool, UK: Liverpool John Moores Univ.
He, X., Q. Yang, and G. He. 2010. “Anti-erosion property of polypropylene fiber reinforced cement-stabilized macadam base material.” J. Build. Mater. 13 (2): 263–267.
Karaşahin, M., M. Saltan, and S. Çetin. 2014. “Determination of seal coat deterioration using image processing methods.” Constr. Build. Mater. 53: 273–283. https://doi.org/10.1016/j.conbuildmat.2013.11.090.
Kermani, B., M. Xiao, S. M. Stoffels, and T. Qiu. 2018. “Reduction of subgrade fines migration into subbase of flexible pavement using geotextile.” Geotext. Geomembr. 46 (4): 377–383. https://doi.org/10.1016/j.geotexmem.2018.03.006.
Kruntcheva, M. R., A. C. Collop, and N. H. Thom. 2005. “Effect of bond condition on flexible pavement performance.” J. Transp. Eng. 131 (11): 880–888. https://doi.org/10.1061/(ASCE)0733-947X(2005)131:11(880).
Li, W., G. X. Zhu, and Baozhu. 2017. “Cause analysis on the void under slabs of cement concrete pavement” In Vol. of 205 Proc., 2nd Int. Conf. on Materials Engineering and Nanotechnology, IOP Conf. Series: Materials Science and Engineering, 1–5. Bristol, UK: IOP Publishing.
Lim, L., R. Tolentino, and R. Espino. 2006. “Geosynthetic applications for reinforced soil structure and pavement rehabilitation works: Field experience in Philippines.” In Proc., Road Engineering Association of Asia and Australasia (REAAA) Conf. Quezon City, Philippines: Road Engineering Association of the Philippines.
Liu, F. M., and W. L. Chen. 2007. “Application of grouting technology pumping and slab cavity problems on cement concrete pavement.” Road Mach. Constr. Mechanization 1 (04): 43–46.
Pasetto, M., and N. Baldo. 2013. “Resistance to permanent deformation of road and airport high performance asphalt concrete base courses.” Adv. Mater. Res. 723: 494–502.
Pomerantz, M., H. Akbari, S.-C. Chang, R. Levinson, and B. Pon. 2003. Examples of cooler reflective streets for urban heat-island mitigation: Portland cement concrete and chip seals. Berkeley, CA: Office of Scientific and Technical Information.
Sandiford, R., S. Law, and G. Roscoe. 1996. “Application of geosynthetics in the construction of an overrun area at La Guardia airport.” Geotext. Geomembr. 14 (3–4): 193–200. https://doi.org/10.1016/0266-1144(96)00009-X.
Sha, A. M., and L. Q. Hu. 2002. “Experimental study on the anti-erosion properties of pavement base materials.” Chin. J. Geotech. Eng.-Chin. Ed. 24 (3): 276–280.
Solaimanian, M., and T. W. Kennedy. 1998. Evaluation of the cape seal process as a pavement rehabilitation alternative. Austin, TX: Center for Transportation Research.
Tang-liang, Z., T. Zhi-ming, and Z. Yu-min. 2012. “Experimental research on erosion-resistance performances of cement stabilized base materials.” J. Build. Mater. 15 (4): 565–569.
Ullman, T. D., A. Stuhlmüller, N. D. Goodman, and J. B. Tenenbaum. 2018. “Learning physical parameters from dynamic scenes.” Cognit. Psychol. 104 (Aug): 57–82. https://doi.org/10.1016/j.cogpsych.2017.05.006.
Wu, J. J., L. Duan, and S. Zhang. 2014. “A study of the micrometeorological characteristics in the surface layer of Kangding airport.” Adv. Mater. Res. 926: 3731–3734.
Yi, Z. J., Q. G. Yang, B. M. Tang, G. X. Wu, and Z. X. Zhou. 2002. “A fundamental understanding to the failure of cement concrete pavement based on the concept of fracture mechanics.” Road Mater. Pavement Des. 3 (3): 261–280. https://doi.org/10.1080/14680629.2002.9689925.
Yuan, J., S. Xu, X. Hou, F. Xiao, C. Jiang, and Y. Luo. 2018. “Functional layer designation of combined chip seal and slurry seal in airport pavement.” J. Test. Eval. 46 (3): 956–966. https://doi.org/10.1520/JTE20160431.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Aug 18, 2018
Accepted: Jun 10, 2019
Published online: Oct 29, 2019
Published in print: Jan 1, 2020
Discussion open until: Mar 29, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.