Evaluation of Aging Resistance of Asphalt Binder Modified with Graphene Oxide and Carbon Nanotubes
Publication: Journal of Materials in Civil Engineering
Volume 31, Issue 11
Abstract
Graphene oxide (GO) and carbon nanotubes (CNTs) hold the potential to improve antiaging properties of construction material such as asphalt binders and mixtures. To prolong the service life of asphalt pavement, the aging resistance of 70# base asphalt binder, GO-modified asphalt binder, and CNT-modified asphalt binder was evaluated. Aged asphalt binders were obtained by the rolling thin-film oven test (RTFOT) and ultraviolet (UV) aging test. The high-speed shear mixing method combined with ultrasonic dispersion technology was adopted to solve the problem of dispersion of nanomaterials in asphalt binder and the asphalt samples were prepared by the melt-blending method. The surface morphology of GO and CNTs was analyzed with a focused ion beam scanning electron microscope (FIB-SEM). The residual penetration ratio (PRR), softening point increment (SPI), residual ductility ratio (DRR), and viscosity aging index (VAI) were employed to assess physical performance attenuation amplitude of asphalt binder samples after RTFOT and UV aging. The rheological properties of GO-modified asphalt binder and CNT-modified asphalt binder were investigated with a hybrid rheometer, and complex modulus () ratio and phase angle () ratio were selected as antiaging indexes. The increments were tested by Fourier-transform infrared spectroscopy (FTIR) to identify the chemical structure changes during aging process, and the FTIR of the pure GO (or pure CNT) was also conducted. The physical performance testing results illustrated that both GO and CNT could decrease the physical performance attenuation amplitude. Values of ratio and ratio from rheological testing revealed that the addition of GO (or CNT) could effectively suppress the growth of and the attenuation of . The FTIR results indicated that the lower the value, the better was the antiaging performance. All phenomena indicated that both GO and CNT can help improve the aging resistance of 70# base asphalt binder. This research provides good inspiration for exploring the excellent performance of nanoparticles modified asphalt binder, which can help broaden the application of nanomodification in asphalt materials.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study was financially supported by the National Natural Science Foundation of China (Grant No. 51708513) and the Research Project of Henan Provincial Department of Transportation [Grant No. 2016(J)2]. The authors are sincerely grateful for their support.
References
Ahmed, H., J. A. Bogas, and M. Guedes. 2018. “Mechanical behavior and transport properties of cementitious composites reinforced with carbon nanotubes.” J. Mater. Civ. Eng. 30 (10): 04018257. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002470.
Al-Adham, K. H., and M. D. Arifuzzaman. 2014. “Moisture damage evaluation in carbon nanotubes reinforced asphalts.” In Proc., 3rd Int. Conf. on Transportation Infrastructure (ICTI), 103–109. Pisa, Italy: Univ. of Pisa.
ASTM. 2005. Standard specification for type IV polymer-modified asphalt cement for use in pavement construction. ASTM D5892. West Conshohocken, PA: ASTM.
ASTM. 2007. Standard test method for ductility of bituminous materials. ASTM D113. West Conshohocken, PA: ASTM.
ASTM. 2013. Standard test method for penetration of bituminous materials. ASTM D5. West Conshohocken, PA: ASTM.
ASTM. 2014a. Standard test method for effect of heat and air on a moving film of asphalt (rolling thin-film oven test). ASTM D2872. West Conshohocken, PA: ASTM.
ASTM. 2014b. Standard test method for softening point of bitumen (ring-and-ball apparatus). ASTM D36. West Conshohocken, PA: ASTM.
ASTM. 2015a. Standard test method for determining the rheological properties of asphalt binder using a dynamic shear rheometer. ASTM D7175. West Conshohocken, PA: ASTM.
ASTM. 2015b. Standard test method for viscosity determination of asphalt at elevated temperatures using a rotational viscometer. ASTM D4402. West Conshohocken, PA: ASTM.
Bhande, S. S., R. B. Ambade, D. V. Shinde, S. B. Ambade, S. A. Patil, M. Naushad, R. S. Mane, Z. A. Alothman, S. H. Lee, and S. H. Han. 2015. “Improved photoelectrochemical cell performance of tin oxide with functionalized multiwalled carbon nanotubes-cadmium selenide sensitizer.” ACS Appl. Mater. Interfaces 7 (45): 25094–25104. https://doi.org/10.1021/acsami.5b05385.
Catalá, G., E. V. Ramos-Fernández, E. Zornoza, L. G. Andión, and P. Garcés. 2011. “Influence of the oxidation process of carbon material on the mechanical properties of cement mortars.” J. Mater. Civ. Eng. 23 (3): 321–329. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000175.
Cong, P., P. Xu, and S. Chen. 2014. “Effects of carbon black on the anti aging, rheological and conductive properties of SBS/asphalt/carbon black composites.” Constr. Build. Mater. 52 (Feb): 306–313. https://doi.org/10.1016/j.conbuildmat.2013.11.061.
Feng, Z., J. Yu, and S. Wu. 2012. “Rheological evaluation of bitumen containing different ultraviolet absorbers.” Constr. Build. Mater. 29 (Apr): 591–596. https://doi.org/10.1016/j.conbuildmat.2011.11.007.
Goli, A., H. Ziari, and A. Amini. 2017. “Influence of carbon nanotubes on performance properties and storage stability of SBS modified asphalt binders.” J. Mater. Civ. Eng. 29 (8): 04017070. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001910.
Gong, M., J. Yang, H. Yao, M. Wang, X. Niu, and J. E. Haddock. 2017. “Investigating the performance, chemical, and microstructure properties of carbon nanotube-modified asphalt binder.” Road Mater. Pavement Des. 19 (7): 1499–1522. https://doi.org/10.1080/14680629.2017.1323661.
Habib, N. Z., N. C. Aun, S. E. Zoorob, and P. I. Lee. 2015. “Use of graphene oxide as a bitumen modifier: an innovative process optimization study.” Adv. Mater. Res. 1105: 365–369. https://doi.org/10.4028/www.scientific.net/AMR.1105.365.
Hou, X., F. Xiao, J. Wang, and S. Amirkhanian. 2018. “Identification of asphalt aging characterization by spectrophotometry technique.” Fuel 226 (Aug): 230–239. https://doi.org/10.1016/j.fuel.2018.04.030.
Kumar, S., P. Kolay, S. Malla, and S. Mishra. 2012. “Effect of multiwalled carbon nanotubes on mechanical strength of cement paste.” J. Mater. Civ. Eng. 24 (1): 84–91. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000350.
Latifi, H., and P. Hayati. 2018. “Evaluating the effects of the wet and simple processes for including carbon Nanotube modifier in hot mix asphalt.” Constr. Build. Mater. 164 (Mar): 326–336. https://doi.org/10.1016/j.conbuildmat.2017.12.237.
Liu, K., K. Zhang, and X. Shi. 2018a. “Performance evaluation and modification mechanism analysis of asphalt binders modified by graphene oxide.” Constr. Build. Mater. 163 (Feb): 880–889. https://doi.org/10.1016/j.conbuildmat.2017.12.171.
Liu, W., K. Yan, D. Ge, and M. Chen. 2018b. “Effect of APAO on the aging properties of waste tire rubber modified asphalt binder.” Constr. Build. Mater. 175 (Jun): 333–341. https://doi.org/10.1016/j.conbuildmat.2018.04.098.
Pang, L., K. Liu, S. Wu, M. Lei, and Z. Chen. 2014. “Effect of LDHs on the aging resistance of crumb rubber modified asphalt.” Constr. Build. Mater. 67 (Sep): 239–243. https://doi.org/10.1016/j.conbuildmat.2013.10.040.
Park, S., K. S. Lee, G. Bozoklu, W. Cai, S. T. Nguyen, and R. S. Ruoff. 2008. “Graphene oxide papers modified by divalent ions—Enhancing mechanical properties via chemical cross-linking.” Acs Nano 2 (3): 572–578. https://doi.org/10.1021/nn700349a.
Petersen, J. 2009. A review of the fundamentals of asphalt oxidation: Chemical, physicochemical, physical property and durability relationships. Washington, DC: Transportation Research Board.
Prabin, K., and S. Dharamveer. 2018. “High- and intermediate-temperature performance of asphalt binder containing carbon nanotube using different rheological approaches.” J. Mater. Civ. Eng. 30 (1): 04017254. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002106.
Priolo, M. A., D. Gamboa, K. M. Holder, and J. C. Grunlan. 2010. “Super gas barrier of transparent polymer-clay multilayer ultrathin films.” Nano Lett. 10 (12): 4970–4974. https://doi.org/10.1021/nl103047k.
Santagata, E., O. Baglieri, L. Tsantilis, G. Chiappinelli, and I. Brignone Aimonetto. 2015. “Effect of sonication on high temperature properties of bituminous binders reinforced with nano-additives.” Constr. Build. Mater. 75 (Jan): 395–403. https://doi.org/10.1016/j.conbuildmat.2014.11.021.
Santagata, E., O. Baglieri, L. Tsantilis, and D. Dalmazzo. 2012. “Rheological characterization of bituminous binders modified with carbon nanotubes.” Procedia Soc. Behav. Sci. 53 (Oct): 546–555. https://doi.org/10.1016/j.sbspro.2012.09.905.
Shafabakhsh, G., S. M. Mirabdolazimi, and M. Sadeghnejad. 2014. “Evaluation the effect of nano- on the rutting and fatigue behavior of asphalt mixtures.” Constr. Build. Mater. 54 (Mar): 566–571. https://doi.org/10.1016/j.conbuildmat.2013.12.064.
SHRP (Strategic Highway Research Program). 1994. Binder characterization and evaluation. Vol. 4: Test methods. Washington, DC: SHRP.
Shu, B., S. Wu, L. Pang, and B. Javilla. 2017. “The utilization of multiple-walled carbon nanotubes in polymer modified bitumen.” Materials 10 (4): 416. https://doi.org/10.3390/ma10040416.
Sun, L., H. Guan, and Q. Ge. 2011. “Research on the performance of asphalt modified by SBS rubber and carbon nanotube.” Appl. Mech. and Mater. 99 (100): 1243–1246.
Tang, Z., X. Wu, B. Guo, L. Zhang, and D. Jia. 2012. “Preparation of butadiene–styrene–vinyl pyridine rubber–graphene oxide hybrids through co-coagulation process and in situ interface tailoring.” J. Mater. Chem. 22 (15): 7492. https://doi.org/10.1039/c2jm00084a.
Tyson, B. M., R. K. Abu Al-Rub, A. Yazdanbakhsh, and Z. Grasley. 2011. “Carbon nanotubes and carbon nanofibers for enhancing the mechanical properties of nanocomposite cementitious materials.” J. Mater. Civ. Eng. 23 (7): 1028–1035. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000266.
Wang, L., et al. 2011. “Layered assembly of graphene oxide and Co–Al layered double hydroxide nanosheets as electrode materials for supercapacitors.” Chem. Commun. 47 (12): 3556–3558. https://doi.org/10.1039/c0cc05420h.
Wang, P., F. Zhai, Z.-J. Dong, L.-Z. Wang, J.-P. Liao, and G.-R. Li. 2018. “Micromorphology of asphalt modified by polymer and carbon nanotubes through molecular dynamics simulation and experiments: Role of strengthened interfacial interactions.” Energy Fuels 32 (2): 1179–1187. https://doi.org/10.1021/acs.energyfuels.7b02909.
Wu, S., J. Han, L. Pang, M. Yu, and T. Wang. 2012. “Rheological properties for aged bitumen containing ultraviolate light resistant materials.” Constr. Build. Mater. 33 (Aug): 133–138. https://doi.org/10.1016/j.conbuildmat.2012.01.019.
Wu, S., Z. Zhao, Y. Li, L. Pang, S. Amirkhanian, and M. Riara. 2017. “Evaluation of aging resistance of graphene oxide modified asphalt.” Appl. Sci. 7 (7): 702. https://doi.org/10.3390/app7070702.
Xiao, P., J. Zheng, A. Kang, L. Sun, and Y. Wang. 2017. “Aging characteristics of rubber modified asphalts in different environmental factors combinations.” Appl. Sci. 7 (8): 806. https://doi.org/10.3390/app7080806.
Yang, J., F. Chen, Y. Ye, Z. Fei, and M. Zhong. 2010. “Preparation and characterization of polystyrene (PS)/layered double hydroxides (LDHs) composite by a heterocoagulation method.” Colloid. Polym. Sci. 288 (7): 761–767. https://doi.org/10.1007/s00396-010-2204-z.
Yoo, B. M., H. J. Shin, H. W. Yoon, and H. B. Park. 2014. “Graphene and graphene oxide and their uses in barrier polymers.” J. Appl. Polym. Sci. 131 (1): 1–23. https://doi.org/10.1002/app.39628.
Zeng, W., S. Wu, L. Pang, Y. Sun, and Z. Chen. 2017. “The utilization of graphene oxide in traditional construction materials: Asphalt.” Materials 10 (1): 48. https://doi.org/10.3390/ma10010048.
Zhang, H., J. Yu, and S. Wu. 2012. “Effect of montmorillonite organic modification on ultraviolet aging properties of SBS modified bitumen.” Constr. Build. Mater. 27 (1): 553–559. https://doi.org/10.1016/j.conbuildmat.2011.07.008.
Ziari, H., A. Amini, A. Goli, and D. Mirzaiyan. 2018. “Predicting rutting performance of carbon nano tube (CNT) asphalt binders using regression models and neural networks.” Constr. Build. Mater. 160 (Jan): 415–426. https://doi.org/10.1016/j.conbuildmat.2017.11.071.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Nov 2, 2018
Accepted: Jun 4, 2019
Published online: Aug 29, 2019
Published in print: Nov 1, 2019
Discussion open until: Jan 29, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.