Influence of Nitrate Corrosion Inhibitors on Phase Stability of Alkali-Activated Slag against Chloride Binding and Natural Carbonation
Publication: Journal of Materials in Civil Engineering
Volume 31, Issue 8
Abstract
Nitrate and nitrite-based corrosion inhibitors have been studied for decades for mitigating corrosion of steel embedded in ordinary portland cement (OPC) concrete; however, few studies are available regarding the effect of nitrate or nitrite on the performance of alkali-activated binders. This work, for the first time, investigates the influence of three nitrate-containing activators (i.e., sodium nitrate, magnesium nitrate, and aluminum nitrate, each mixed with sodium hydroxide solution) on the strength development, pore structure, phase assemblage, and phase stability of alkali-activated slag (AAS) binders upon exposure to chloride and natural carbonation. The results show that the addition of nitrate, regardless of its form, does not substantially alter the type of main reacted phases, i.e., calcium-aluminosilicate-hydrate (C-A-S-H) and Mg-Al layered double hydroxides (LDHs), in AAS; however, the addition of aluminum nitrate improves its compressive strength, boosts the formation of Ca-Al LDHs (AFm-type phase), and likely inserts nitrate anions in the interlayer of formed Ca-Al or Mg-Al LDHs. The findings suggest that the nitrate-intercalated Ca-Al LDHs and/or Mg-Al LDHs, if formed to some extent, can potentially release nitrate ions during chloride binding and carbonation, working as a smart corrosion inhibitor.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to thank the financial support from the Hong Kong Research Grants Council (Project No. 27204818) and National Natural Science Foundation of China (Project No. 51808475). Any opinions, findings, and conclusions or recommendations expressed in this material are those of the authors and do not necessarily reflect the views of the sponsors.
References
Balonis, M., and F. P. Glasser. 2011. “Calcium nitrite corrosion inhibitor in portland cement: Influence of nitrite on chloride binding and mineralogy.” J. Am. Ceram. Soc. 94 (7): 2230–2241. https://doi.org/10.1111/j.1551-2916.2010.04362.x.
Balonis, M., M. Medala, and F. P. Glasser. 2011. “Influence of calcium nitrate and nitrite on the constitution of AFm and AFt cement hydrates.” Adv. Cem. Res. 23 (3): 129–143. https://doi.org/10.1680/adcr.10.00002.
Beaudoin, J. J., V. S. Ramachandran, and R. F. Feldman. 1990. “Interaction of chloride and C-S-H.” Cem. Concr. Res. 20 (6): 875–883. https://doi.org/10.1016/0008-8846(90)90049-4.
Bernal, S. A., R. San Nicolas, R. J. Myers, R. M. de Gutiérrez, F. Puertas, J. S. J. van Deventer, and J. L. Provis. 2014a. “MgO content of slag controls phase evolution and structural changes induced by accelerated carbonation in alkali-activated binders.” Cem. Concr. Res. 57 (Mar): 33–43. https://doi.org/10.1016/j.cemconres.2013.12.003.
Bernal, S. A., R. San Nicolas, J. L. Provis, R. M. De Gutiérrez, and J. S. J. Van Deventer. 2014b. “Natural carbonation of aged alkali-activated slag concretes.” Mater. Struct. 47 (4): 693–707. https://doi.org/10.1617/s11527-013-0089-2.
Birnin-Yauri, U. A., and F. P. Glasser. 1998. “Friedel’s salt, : Its solid solutions and their role in chloride binding.” Cem. Concr. Res. 28 (12): 1713–1723. https://doi.org/10.1016/S0008-8846(98)00162-8.
Broomfield, J. P. 2003. Corrosion of steel in concrete: Understanding, investigation and repair. Boca Raton, FL: CRC Press.
Cao, Y., S. Dong, D. Zheng, J. Wang, X. Zhang, R. Du, G. Song, and C. Lin. 2017. “Multifunctional inhibition based on layered double hydroxides to comprehensively control corrosion of carbon steel in concrete.” Corros. Sci. 126 (Sep): 166–179. https://doi.org/10.1016/j.corsci.2017.06.026.
Chen, Y., Z. Shui, W. Chen, and G. Chen. 2015. “Chloride binding of synthetic Ca-Al–NO3 LDHs in hardened cement paste.” Constr. Build. Mater. 93 (Sep): 1051–1058. https://doi.org/10.1016/j.conbuildmat.2015.05.047.
Duxson, P., J. L. Provis, G. C. Lukey, S. W. Mallicoat, W. M. Kriven, and J. S. J. Van Deventer. 2005. “Understanding the relationship between geopolymer composition, microstructure and mechanical properties.” Colloids Surf. A 269 (1–3): 47–58. https://doi.org/10.1016/j.colsurfa.2005.06.060.
Florea, M. V. A., and H. J. H. Brouwers. 2012. “Chloride binding related to hydration products. Part I: Ordinary portland cement.” Cem. Concr. Res. 42 (2): 282–290. https://doi.org/10.1016/j.cemconres.2011.09.016.
Fu, C., N. Jin, H. Ye, X. Jin, and W. Dai. 2017. “Corrosion characteristics of a 4-year naturally corroded reinforced concrete beam with load-induced transverse cracks.” Corros. Sci. 117: 11–23. https://doi.org/10.1016/j.corsci.2017.01.002.
Gaidis, J. M. 2004. “Chemistry of corrosion inhibitors.” Cem. Concr. Compos 26 (3): 181–189. https://doi.org/10.1016/S0958-9465(03)00037-4.
Haha, M. B., B. Lothenbach, G. L. Le Saout, and F. Winnefeld. 2011. “Influence of slag chemistry on the hydration of alkali-activated blast-furnace slag. Part I: Effect of MgO.” Cem. Concr. Res. 41 (9): 955–963. https://doi.org/10.1016/j.cemconres.2011.05.002.
Justnes, H. 2002. “Calcium nitrate as corrosion inhibitor for reinforced concrete.” In Innovations and development in concrete materials and construction, edited by R. K. Dhir, P. C. Hewlett, and L. J. Csetenyi, 391–401. London: Thomas Telford.
Kanezaki, E. 1998. “Thermal behavior of the hydrotalcite-like layered structure of Mg and Al-layered double hydroxides with interlayer carbonate by means of in situ powder HTXRD and DTA/TG.” Solid State Ionics 106 (3–4): 279–284. https://doi.org/10.1016/S0167-2738(97)00494-3.
Kayali, O., M. S. H. Khan, and M. S. Ahmed. 2012. “The role of hydrotalcite in chloride binding and corrosion protection in concretes with ground granulated blast furnace slag.” Cem. Concr. Compos. 34 (8): 936–945. https://doi.org/10.1016/j.cemconcomp.2012.04.009.
Ke, X., S. A. Bernal, and J. L. Provis. 2017. “Uptake of chloride and carbonate by Mg-Al and Ca-Al layered double hydroxides in simulated pore solutions of alkali-activated slag cement.” Cem. Concr. Res. 100 (Oct): 1–13. https://doi.org/10.1016/j.cemconres.2017.05.015.
L’Hôpital, E., B. Lothenbach, G. Le Saout, D. Kulik, and K. Scrivener. 2015. “Incorporation of aluminium in calcium-silicate-hydrates.” Cem. Concr. Res. 75 (Sep): 91–103. https://doi.org/10.1016/j.cemconres.2015.04.007.
Provis, J. L., A. Palomo, and C. Shi. 2015. “Advances in understanding alkali-activated materials.” Cem. Concr. Res. 78 (Dec): 110–125. https://doi.org/10.1016/j.cemconres.2015.04.013.
Raki, L., J. J. Beaudoin, and L. Mitchell. 2004. “Layered double hydroxide-like materials: Nanocomposites for use in concrete.” Cem. Concr. Res. 34 (9): 1717–1724. https://doi.org/10.1016/j.cemconres.2004.05.012.
Richardson, I. G. 2008. “The calcium silicate hydrates.” Cem. Concr. Res. 38 (2): 137–158. https://doi.org/10.1016/j.cemconres.2007.11.005.
Scrivener, K. L. 2004. “Backscattered electron imaging of cementitious microstructures: Understanding and quantification.” Cem. Concr. Compos. 26 (8): 935–945. https://doi.org/10.1016/j.cemconcomp.2004.02.029.
Söylev, T. A., and M. G. Richardson. 2008. “Corrosion inhibitors for steel in concrete: State-of-the-art report.” Constr. Build. Mater. 22 (4): 609–622. https://doi.org/10.1016/j.conbuildmat.2006.10.013.
Wang, Q., and D. O’Hare. 2012. “Recent advances in the synthesis and application of layered double hydroxide (LDH) nanosheets.” Chem. Rev. 112 (7): 4124–4155. https://doi.org/10.1021/cr200434v.
Yang, Z., H. Fischer, J. Cerezo, J. M. C. Mol, and R. Polder. 2013a. “Aminobenzoate modified MgAl hydrotalcites as a novel smart additive of reinforced concrete for anticorrosion applications.” Constr. Build. Mater. 47: 1436–1443. https://doi.org/10.1016/j.conbuildmat.2013.06.049.
Yang, Z., H. Fischer, and R. Polder. 2013b. “Modified hydrotalcites as a new emerging class of smart additive of reinforced concrete for anticorrosion applications: A literature review.” Mater. Corros. 64 (12): 1066–1074. https://doi.org/10.1002/maco.201206915.
Yang, Z., H. Fischer, and R. Polder. 2014. “Synthesis and characterization of modified hydrotalcites and their ion exchange characteristics in chloride-rich simulated concrete pore solution.” Cem. Concr. Compos. 47 (Mar): 87–93. https://doi.org/10.1016/j.cemconcomp.2013.03.008.
Ye, H. 2018. “Nanoscale attraction between calcium-aluminosilicate-hydrate and Mg-Al layered double hydroxides in alkali-activated slag.” Mater. Charact. 140 (Jun): 95–102. https://doi.org/10.1016/j.matchar.2018.03.049.
Ye, H., and A. Radlińska. 2017. “Carbonation-induced volume change in alkali-activated slag.” Constr. Build. Mater. 144 (Jul): 635–644. https://doi.org/10.1016/j.conbuildmat.2017.03.238.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Dec 28, 2018
Accepted: Mar 26, 2019
Published online: May 25, 2019
Published in print: Aug 1, 2019
Discussion open until: Oct 25, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.