Chemical and Mechanical Properties of 70-Year-Old Concrete
Publication: Journal of Materials in Civil Engineering
Volume 31, Issue 8
Abstract
The aim of this research is to determine the durability and strength of concrete continuous footing based on the chosen mechanical, physical, and chemical properties of the concrete. The presented investigations constitute some opinions from experts on the bearing capacity of concrete continuous footing and the possibilities of carrying additional loads and extended working life. The cylindrical specimens were taken from continuous footing by a concrete core bore hole diamond drill machine. The properties of old concrete are compared with present and old standard requirements and guidelines. Large dispersions of the cylindrical compressive strength (6.9–29.3 MPa), density (), and water absorption (5%–14%) were observed. A short literature survey concerning old concrete properties is also given.
Get full access to this article
View all available purchase options and get full access to this article.
References
ACI (American Concrete Institute). 1989. Building code requirement for reinforced concrete. ACI 318. Farmington Hills, MI: ACI.
ACI (American Concrete Institute). 2014. Building code requirements for structural concrete. ACI 318. Farmington Hills, MI: ACI.
ASTM. 2013. Standard test method for measurement of rate of absorption of water by hydraulic-cement concretes. ASTM C1585. West Conshohocken, PA: ASTM.
ASTM. 2014. Standard test method for static modulus of elasticity and poisson’s ratio of concrete in compression. ASTM C469M. West Conshohocken, PA: ASTM.
ASTM. 2015. Standard test method for slump of hydraulic-cement concrete. ASTM C143/C143M. West Conshohocken, PA: ASTM.
ASTM. 2018. Standard practice for making and curing concrete test specimens in the field. ASTM C31/C31M. West Conshohocken, PA: ASTM.
Blanco, A., I. Segura, S. H. P. Cavalaro, S. Chinchón-Payá, and A. Aguado. 2016. “Sand-cement concrete in the century-old Camarasa Dam.” J. Perform. Constr. Facil. 30 (4): 04015083. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000823.
BSI (British Standards Institution). 1985. Structural use of concrete–Part 1: Code of practice for design and construction. BS 8110-1. London: BSI.
BSI (British Standards Institution). 1997. Structural use of concrete–Part 1: Code of practice for design and construction. BS 8110-1. London: BSI.
CEB-fib (Euro-International Committee for Concrete-International Federation for Pre-stressing). 1989. Diagnosis and assessment of concrete structures: State-of-art. Lausanne, Switzerland: CEB-fib.
CEN (European Committee for Standardization). 2001a. Common rules for precast concrete products. EN 13369. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2001b. Test hardening concrete. Part 3: Compressive strength of test specimens. EN 12390-3. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2004. Eurocode 2: Design of concrete structures. Part 1-1: General rules and rules for buildings. EN 1992-1-1. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2009a. Testing concrete in structures. Part 1: Cored specimens: Taking, examining and testing in compression. EN 12504-1. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2009b. Tests for chemical properties of aggregates. Part 1: Chemical analysis. EN 1744-1+A1. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2013. Concrete: Specification, performance, production and conformity. EN 206+A1. Brussels, Belgium: CEN.
Concrete Society. 2014. Analysis of hardened concrete A guide to tests, procedures and interpretation of results. 2nd ed. Camberley, UK: Concrete Society.
Dawczynski, S., and J. Brol. 2016. “Laboratory tests of old reinforced concrete precast bridge beams.” Archit. Civ. Eng. Environ. 9 (2): 57–63. https://doi.org/10.21307/acee-2016-022.
De Schutter, G., and K. Audenaert. 2004. “Evaluation of water absorption of concrete as a measure for resistance against carbonation and chloride migration.” Mater. Struct. 37: 591. https://doi.org/10.1007/BF02483288.
Duffó, G. S., S. B. Farina, and C. M. Giordano. 2009. “Characterization of solid embeddable reference electrodes for corrosion monitoring in reinforced concrete structures.” Electrochim. Acta 54 (3): 1010–1020. https://doi.org/10.1016/j.electacta.2008.08.025.
Gibas, K., M. A. Glinicki, D. Jóźwiak-Niedźwiedzka, M. Dąbrowski, G. Nowowiejski, and M. Gryziński. 2015. “Properties of the thirty years old concrete in unfinished Żarnowiec Nuclear Power Plant.” Procedia Eng. 108: 124–130. https://doi.org/10.1016/j.proeng.2015.06.127.
ISO. 2008. Water quality: Determination of pH. ISO 10523. Geneva: ISO.
ISO. 2010. Testing of concrete. Part 10: Determination of static modulus of elasticity in compression. ISO 1920. Geneva: ISO.
Kelham, S. 1988. “A water absorption test for concrete.” Mag. Concr. Res. 40 (143): 106–110. https://doi.org/10.1680/macr.1988.40.143.106.
Ma, H. 2014. “Mercury intrusion porosimetry in concrete technology: Tips in measurement, pore structure acquisition and application.” J. Porous. Mater. 21 (2): 207–215. https://doi.org/10.1007/s10934-013-9765-4.
Muntean, M., N. Noica, L. Radu, I. Ropota, A. Ionescu, and O. Muntean. 2008. “Concrete carbonation and its durability.” Revista Romania de Materiale/Rom. J. Mater. 38 (4): 284–292.
NACU (National Association of Cement Users). 1910. Standard building regulations for the use of reinforced concrete. Detroit: NACU.
Pettigrew, C. S., P. J. Barr, M. Maguire, and M. W. Halling. 2016. “Behavior of 48-year-old double-tee bridge girders made with lightweight concrete.” J. Bridge Eng. 21 (9): 0000921. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000921.
PKN (Polish Committee for Standardization). 1945. Concrete and reinforced concrete structures. Structural analysis and design. [In Polish.] PN-B-195. Warsaw, Poland: PKN.
PKN (Polish Committee for Standardization). 1988. Normal concrete. [In Polish.] PN-88/B-06250. Warsaw, Poland: PKN.
Qazweeni, J., and O. Daoud. 1991. “Concrete deterioration in a 20-year-old structure in Kuwait.” Cem. Concr. Res. 21 (6): 1155–1164. https://doi.org/10.1016/0008-8846(91)90076-T.
Sena-Cruz, J., R. M. Ferreira, L. F. Ramos, F. Fernandes, T. Miranda, and F. Castro. 2013. “Luiz Bandeira bridge: Assessment of a historical reinforced concrete (RC) bridge.” Int. J. Archit. Heritage 7 (6): 628–652. https://doi.org/10.1080/15583058.2012.654895.
Šimonová, H., P. Daněka, P. Frantíka, Z. Keršnera, and V. Veselýa. 2017. “Tentative characterization of old structural concrete through mechanical fracture parameters.” Procedia Eng. 190: 414–418. https://doi.org/10.1016/j.proeng.2017.05.357.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Oct 11, 2018
Accepted: Mar 28, 2019
Published online: May 25, 2019
Published in print: Aug 1, 2019
Discussion open until: Oct 25, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.