In-Plane Modes of Fracture and Effective Parameters of Self-Consolidating Concrete
Publication: Journal of Materials in Civil Engineering
Volume 31, Issue 8
Abstract
In this paper, Mode I and Mode II fracture energies of self-consolidating concrete (SCC) are examined. Two shapes of Mode II specimens are used, and the specimens are made from mixtures with three different water-to-cement (w/c) ratios. To determine the fracture energy, the size effect methodology is also considered. Results indicated a mixed-mode fracture for beam-type double-notched specimens under four-point loading. There is an evident size effect for the Mode II fracture that is pronounced for larger specimens. With the decrease in w/c ratio from 0.65 to 0.45, and thus increase in compressive strength from 26.44 to 53.5 MPa, the Mode II fracture energy increased by 47%. The brittleness number increased for specimens with higher compressive strength or larger size. The failure cracks propagate through the aggregates rather than the paste for lower w/c ratios. The Mode II fracture energy was on average 26 times the Mode I fracture energy, and this ratio grows by reducing the w/c ratio. Approximate empirical relations are proposed for Mode II fracture energy as well as the ratio of Mode II to Mode I fracture energy () in terms of the compressive strength. Mode II fracture energy takes a lower value for SCC compared with conventional concrete.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to express their gratitude to the academic members of the Faculty of Civil Engineering in Babol Noshirvani University of Technology of Iran who kindly examined the research and made useful comments and suggested valuable modifications.
References
ACI (American Concrete Institute). 2007. Self-consolidating concrete. ACI 237R. Farmington Hills, MI: ACI.
Alhussainy, F., H. A. Hasan, S. Rogic, M. N. Sheikh, and M. N. S. Hadi. 2016. “Direct tensile testing of self-compacting concrete.” J. Constr. Build. Mater. 112 (Jun): 903–906. https://doi.org/10.1016/j.conbuildmat.2016.02.215.
Asadollahi, S., A. Saeedian, M. Dehestani, and F. Zahedi. 2016. “Improved compressive fracture models for self-consolidating concrete (SCC).” Constr. Build. Mater. 123 (Oct): 473–480. https://doi.org/10.1016/j.conbuildmat.2016.07.030.
ASTM. 2002a. Standard test method for splitting tensile strength of cylindrical concrete specimens. ASTM C496. West Conshohocken, PA: ASTM.
ASTM. 2002b. Standard test method for static modulus of elasticity and Poisson’s ratio of concrete in compression. ASTM C469. West Conshohocken, PA: ASTM.
ASTM. 2003. Standard specification for concrete aggregates. ASTM C33. West Conshohocken, PA: ASTM.
ASTM. 2012. Standard test method for compressive strength of cylindrical concrete specimens. ASTM C39/C39M. West Conshohocken, PA: ASTM.
Balaji Rao, K., V. Bhaskar Desai, and D. Jagan Mohan. 2012. “Probabilistic analysis of mode II fracture of concrete with crushed granite stone fine aggregate replacing sand.” Constr. Build. Mater. 27 (1): 319–330. https://doi.org/10.1016/j.conbuildmat.2011.07.041.
Ballatore, E., A. Carpinteri, G. Ferrara, and G. Melchiorri. 1990. “Mixed mode fracture energy of concrete.” Eng. Fract. Mech. 35 (1–3): 145–157. https://doi.org/10.1016/0013-7944(90)90192-J.
Bazant, Z. P. 1984. “Size effect in blunt fracture: Concrete, rock and metal.” J. Eng. Mech. 110 (4): 518–535. https://doi.org/10.1061/(ASCE)0733-9399(1984)110:4(518).
Bazant, Z. P. 1985. “Mechanics of fracture and progressive cracking concrete structures.” Chap. 1 in Fracture mechanics of concrete: Structural application and numerical calculation. Edited by G. C. Sih and A. DiTommaso, 1–94. Dordrecht, Netherlands: Martinus Nijhoff.
Bazant, Z. P., and M. T. Kazemi. 1991. “Size dependence of concrete fracture energy determined by RILEM work-of-fracture method.” Int. J. Fract. 51 (2): 121–138. https://doi.org/10.1007/BF00033974.
Bazant, Z. P., J. K. Kim, and P. A. Pfeiffer. 1986. “Nonlinear fracture properties from size effect tests.” J. Struct. Eng. 112 (2): 289–306. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:2(289).
Bazant, Z. P., and P. A. Pfeiffer. 1986. “Shear fracture tests of concrete.” Mater. Struct. 19 (2): 111–121. https://doi.org/10.1007/BF02481755.
Beygi, M. H. A., M. T. Kazemi, I. M. Nikbin, and J. Vaseghi Amiri. 2013. “The effect of water to cement ratio on fracture parameters and brittleness of self-compacting concrete.” Mater. Des. 50 (Sep): 267–276. https://doi.org/10.1016/j.matdes.2013.02.018.
Beygi, M. H. A., M. T. Kazemi, I. M. Nikbin, and J. Vaseghi Amiri. 2014a. “The effect of aging on the fracture characteristics and ductility of self-compacting concrete.” Mater. Des. 55 (Mar): 937–948. https://doi.org/10.1016/j.matdes.2013.10.066.
Beygi, M. H. A., M. T. Kazemi, J. Vaseghi Amiri, I. M. Nikbin, S. Rabbanifar, and E. Rahmani. 2014b. “Evaluation of the effect of maximum aggregate size on fracture behavior of self-compacting concrete.” Constr. Build. Mater. 55 (Mar): 202–211. https://doi.org/10.1016/j.conbuildmat.2014.01.065.
Biolzi, L. 1990. “Mixed mode fracture in concrete beams.” Eng. Fract. Mech. 35 (1–3): 187–193. https://doi.org/10.1016/0013-7944(90)90196-N.
Carpinteri, A., G. Ferrara, and G. Melchiorri. 1989. “Single edge notched specimen subjected to four point shear: An experimental investigation.” In Proc., Int. Conf. on Recent Developments in the Fracture of Concrete and Rock, edited by S. P. Shah, S. E. Swartz, and B. Barr, 605–614. London: Elsevier Applied Science.
Carpinteri, A., G. Ferrara, G. Melchiorri, and S. Valente. 1990. “The four point shear test on single notched specimens: An experimental and numerical analysis.” In Fracture behaviour and design of materials and structures, edited by D. Firrao, 667–675. Warley, West Midlands: EMAS.
Carpinteri, A., S. Valente, G. Ferrara, and G. Melchiorrl. 1993. “Is mode II fracture energy a real material property?” Comput. Struct. 48 (3): 397–413. https://doi.org/10.1016/0045-7949(93)90316-6.
Dehestani, M., I. M. Nikbin, and S. Asadollahi. 2014. “Effects of specimen shape and size on the compressive strength of self-consolidating concrete (SCC).” Constr. Build. Mater. 66 (Sep): 685–691. https://doi.org/10.1016/j.conbuildmat.2014.06.008.
Golewski, G. L., P. Golewski, and T. Sadowski. 2012. “Numerical modelling crack propagation under Mode II fracture in plain concretes containing siliceous fly-ash additive using XFEM method.” Comput. Mater. Sci. 62 (Sep): 75–78. https://doi.org/10.1016/j.commatsci.2012.05.009.
Karamloo, M., M. Mazloom, and G. Payganeh. 2016. “Influences of water to cement ratio on brittleness and fracture parameters of self-compacting lightweight concrete.” Eng. Fract. Mech. 168 (Part A): 227–241. https://doi.org/10.1016/j.engfracmech.2016.09.011.
Kazemi, M. T., and F. Vossoughi Shahvari. 2004. “Mixed mode fracture of concrete: An experimental investigation.” Scientia Iranica 11 (4): 378–385.
Naga Satish Kumar, C., and T. D. Gunneswara Rao. 2010. “Fracture parameters of high-strength concrete—Mode II testing.” Mag. Concr. Res. 62 (3): 157–162. https://doi.org/10.1680/macr.2010.62.3.157.
Naga Satish Kumar, C., and T. D. Gunneswara Rao. 2015. “An empirical formula for Mode-II fracture energy of concrete.” KSCE J. Civ. Eng. 19 (3): 689–697. https://doi.org/10.1007/s12205-014-1148-0.
Nikbin, I. M., M. R. Davoodi, H. Fallahnejad, S. Rahimi, and F. Farahbod. 2016. “Influence of mineral powder content on the fracture behaviors and ductility of self-compacting concrete.” J. Mater. Civ. Eng. 28 (3): 04015147. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001404.
Reinhardt, H. W., J. Ozbolt, S. Xu, and A. Dinku. 1997. “Shear of structural concrete members and pure mode II testing.” Adv. Cem. Based Mater. 5 (3–4): 75–85. https://doi.org/10.1016/S1065-7355(96)00003-X.
Reinhardt, H. W., and S. Xu. 1998. “Experimental determination of of normal strength concrete.” Mater. Struct. 31 (5): 296–302. https://doi.org/10.1007/BF02480670.
Reinhardt, H. W., and S. Xu. 2000. “A practical testing approach to determine mode II fracture energy for concrete.” Int. J. Fract. 105 (2): 107–125. https://doi.org/10.1023/A:1007649004465.
Shah, S. P. 1990. “Size-effect method for determining fracture energy and process zone size of concrete.” Mater. Struct. 23 (6): 461–465.
Swartz, S. E., and N. M. Taha. 1987. Preliminary investigation of the suitability of the iosipescu test specimen for determining mixed mode fracture properties of concrete. Manhattan, Kansas: Kansas State University-College of Engineering.
Swartz, S. E., and N. M. Taha. 1990. “Mixed mode crack propagation and fracture in concrete.” Eng. Fract. Mech. 35 (1–3): 137–144. https://doi.org/10.1016/0013-7944(90)90191-I.
Van Mier, J. G. M., E. Schlangen, and M. B. Nooru-Mohamed. 1992. “Shear fracture in cementitious composites part I: Experimental observations.” In Proc., FraMCoS I, edited by Z. P. Bazant, 659–670. London: Elsevier.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Jul 13, 2018
Accepted: Mar 14, 2019
Published online: May 25, 2019
Published in print: Aug 1, 2019
Discussion open until: Oct 25, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.