Viability of Gypsum Composites with Addition of Glass Waste for Applications in Construction
Publication: Journal of Materials in Civil Engineering
Volume 31, Issue 3
Abstract
The design of greener materials is of great interest to develop eco-efficient construction systems, causing less environmental impact and following circular economy criteria. Accordingly, the current study aimed to analyze the viability to incorporate glass waste—from construction and demolition—in gypsum composites, promoting a circular economy in the building construction sector. Gypsum-based composites were formulated using different percentages and particle sizes of glass waste, and samples were prepared. These samples were tested in the laboratory, and the following characteristics were determined: dry density, surface hardness, mechanical strength, water absorption by capillarity, and thermal conductivity. Analysis comparing these composites to reference gypsum without additions showed that it is viable to prepare gypsum composites with the addition of glass waste to reduce water absorption by capillarity, improve mechanical strength, and increase surface hardness. All composites comply with the minimum requirements set by regulations. Therefore, these composites can be applied in the manufacturing of gypsum prefabricated elements or as interior coatings requiring special surface hardness, improved water behavior, and mechanical strength properties.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was supported by the Ministry of Economy and Competitiveness of the Spanish Government (Project reference number BIA2013-43061-R). The authors gratefully acknowledge the support of the Materials Laboratory staff at the School of Building Construction of the Universidad Politécnica de Madrid.
References
Adams, K., M. Osmani, T. Thorpe, and J. Thornback. 2017. “Circular economy in construction: Current awareness, challenges and enablers.” Proc. Inst. Civ. Eng. Waste Resour. Manage. 170 (1): 15–24. https://doi.org/10.1680/jwarm.16.00011.
AENOR (Spanish Association for Standardisation and Certification). 2009. “Reglamento de producto que recoge las exigencias particulares de yesos de alta dureza” [Supplementary regulation of high hardness gypsum products]. Reglamento de Producto 35.04. Madrid: AENOR.
AENOR (Spanish Association for Standardisation and Certification). 2014. Yesos de construcción. Otros métodos de ensayo” [Gypsum plasters. Other test methods]. UNE 102042. Madrid: AENOR.
Batayneh, M., I. Marie, and I. Asi. 2007. “Use of selected waste materials in concrete mixes.” Waste Manage. 27 (12): 1870–1876. https://doi.org/10.1016/j.wasman.2006.07.026.
Bhandari, P., and K. Tajne. 2013. “Use of waste glass in cement mortar.” Int. J. Civ. Struct. Eng. 3 (4): 704. https://doi.org/10.6088/ijcser.201203013064.
Carsana, M., M. Frassoni, and L. Bertolini. 2014. “Comparison of ground waste glass with other supplementary cementitious materials.” Cem. Concr. Compos. 45 (Jan): 39–45. https://doi.org/10.1016/j.cemconcomp.2013.09.005.
CEN (European Committee for Standardisation). 2006. Gypsum binders and gypsum plasters. Part 2: Test methods. EN 13279-2. Brussels: CEN.
CEN (European Committee for Standardisation). 2009. Gypsum binders and gypsum plasters. Part 1: Definitions and requirements. EN 13279-1. Brussels: CEN.
CEN (European Committee for Standardisation). 2011. Building lime. Part 2: Test methods. EN 459-2. Brussels: CEN.
del Río Merino, M., J. Santa Cruz Astorqui, P. Villoria Sáez, R. Santos Jiménez, and M. González Cortina. 2018. “Eco plaster mortars with addition of waste for high hardness coatings.” Constr. Build. Mater. 158 (Jan): 649–656. https://doi.org/10.1016/j.conbuildmat.2017.10.037.
Du, H., and K. H. Tan. 2014. “Waste glass powder as cement replacement in concrete.” J. Adv. Concr. Technol. 12 (11): 468–477. https://doi.org/10.3151/jact.12.468.
European Commission. 2010. Europe 2020: A strategy for smart, sustainable and inclusive growth: Communication from the commission. Brussels, Belgium: European Union.
Eurostat. 2017. “Eurostat statistics for waste flow generation 2014.” Accessed February 15, 2018. http://epp.eurostat.ec.europa.eu/portal/page/portal/eurostat/home/.
Galvão, A., A. Farias, and J. Mendes. 2015. “Characterization of waste of soda-lime glass generated from lapping process to reuse as filler in composite materials as thermal insulation.” Ceramica 61 (359): 367–373. https://doi.org/10.1590/0366-69132015613591987.
Ganjian, E., G. Jalull, and H. Sadeghi-Pouya. 2015. Using waste materials and by-products to produce concrete paving blocks. Constr. Build. Mater. 77: 270–275.
Gencel, O., J. J. del Coz Diaz, M. Sutcu, F. Koksal, F. P. Á. Rabanal, and G. Martínez-Barrera. 2016. “A novel lightweight gypsum composite with diatomite and polypropylene fibers.” Constr. Build. Mater. 113 (Jun): 732–740. https://doi.org/10.1016/j.conbuildmat.2016.03.125.
Gutiérrez González, S., J. Gadea, A. Rodríguez, C. Junco, and V. Calderón. 2012. “Lightweight plaster materials with enhanced thermal properties made with polyurethane foam wastes.” Constr. Build. Mater. 28 (1): 653–658. https://doi.org/10.1016/j.conbuildmat.2011.10.055. https://doi.org/10.1016/j.conbuildmat.2011.10.055.
Jani, Y., and W. Hogland. 2014. “Waste glass in the production of cement and concrete—A review.” J. Environ. Chem. Eng. 2 (3): 1767–1775. https://doi.org/10.1016/j.jece.2014.03.016.
Juhász, P., K. Kopecskó, and Á. Suhajda. 2014. “Analysis of capillary absorption properties of porous limestone material and its relation to the migration depth of bacteria in the absorbed biomineralizing compound.” Periodica Polytechnica Civ. Eng. 58 (2): 113–120. https://doi.org/10.3311/PPci.7020.
Kazmi, S. M., S. Abbas, M. L. Nehdi, M. A. Saleem, and M. J. Munir. 2017. “Feasibility of using waste glass sludge in production of ecofriendly clay bricks.” J. Mater. Civ. Eng. 29 (8): 04017056. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001928.
Lim, A. 2014. “The use of waste glass as a partial substitution for fine aggregate in concrete design.” Ph.D. thesis, School of Engineering and IT, Charles Darwin Univ.
Marco, I., E. Carcfa, M. Mas, V. Alcaraz, and A. Luizaga. 2012. “Study of the compressive strength of mortars made with binders composite glass powder.” Informes de la Construcción 64 (528): 529–536. https://doi.org/10.3989/ic.11.100.
Matias, G., P. Faria, and I. Torres. 2014. “Lime mortars with heat treated clays and ceramic waste: A review.” Constr. Build. Mater. 73 (Dec): 125–136. https://doi.org/10.1016/j.conbuildmat.2014.09.028.
Memon, S. A., T. Y. Lo, and H. Cui. 2013. “Utilization of waste glass powder for latent heat storage application in buildings.” Energy Build. 66 (Nov): 405–414. https://doi.org/10.1016/j.enbuild.2013.07.056.
Mohajerani, A., J. Vajna, T. H. H. Cheung, H. Kurmus, A. Arulrajah, and S. Horpibulsuk. 2017. “Practical recycling applications of crushed waste glass in construction materials: A review.” Constr. Build. Mater. 156 (Dec): 443–467. https://doi.org/10.1016/j.conbuildmat.2017.09.005.
Morales Conde, M. J., C. Rodríguez Liñán, and M. A. Pedreño Rojas. 2016. “Physical and mechanical properties of wood-gypsum composites from demolition material in rehabilitation works.” Constr. Build. Mater. 114 (Jul): 6–14. https://doi.org/10.1016/j.conbuildmat.2016.03.137.
Ozbakkaloglu, T., A. Gholampour, and T. Xie. 2018. “Mechanical and durability properties of recycled aggregate concrete: Effect of recycled aggregate properties and content.” J. Mater. Civ. Eng. 30 (2): 04017275. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002142.
Park, S. B., B. C. Lee, and J. H. Kim. 2004. “Studies on mechanical properties of concrete containing waste glass aggregate.” Cem. Concr. Res. 34 (12): 2181–2189. https://doi.org/10.1016/j.cemconres.2004.02.006.
Saiz Martínez, P., M. González Cortina, F. Fernández Martínez, and A. Rodríguez Sánchez. 2016. “Comparative study of three types of fine recycled aggregates from construction and demolition waste (CDW), and their use in masonry mortar fabrication.” J. Cleaner Prod. 118 (Apr): 162–169. https://doi.org/10.1016/j.jclepro.2016.01.059.
San-Antonio-González, A., M. D. R. Merino, C. V. Arrebola, and P. Villoria-Sáez. 2016. “Lightweight material made with gypsum and EPS waste with enhanced mechanical strength.” J. Mater. Civ. Eng. 28 (2): 04015101. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001382.
Shi, C., and K. Zheng. 2007. “A review on the use of waste glasses in the production of cement and concrete.” Resour. Conserv. Recycl. 52 (2): 234–247. https://doi.org/10.1016/j.resconrec.2007.01.013.
Spanish Government. 2006. “de 17 de marzo, por el que se aprueba el Código Técnico de la Edificación” [Royal Decree 314/2006, of March 17, which approves the Technical Building Code]. RD 314/2006. Madrid: Ministerio de Vivienda, Construcción y Saneamiento.
Topcu, I. B., and M. Canbaz. 2004. “Properties of concrete containing waste glass.” Cem. Concr. Res. 34 (2): 267–274. https://doi.org/10.1016/j.cemconres.2003.07.003.
Tounchuen, K., W. Buggakupta, and W. Panpa. 2014. “Characteristics of automotive glass waste-containing gypsum bodies made from used plaster mould.” In Vol. 608 of Key engineering materials, 91–96. Stafa-Zurich, Switzerland: Trans Tech Publications.
Vidales Barriguete, A., M. del Río Merino, E. Atanes Sánchez, C. Piña Ramírez, and C. Viñas Arrebola. 2018. “Analysis of the feasibility of the use of CDW as a low-environmental-impact aggregate in conglomerates.” Constr. Build. Mater. 178 (Jul): 83–91. https://doi.org/10.1016/j.conbuildmat.2018.05.011.
Villoria Sáez, P., J. Santa Cruz Astorqui, M. del Río Merino, M. d. P. Mercader Moyano, and A. Rodríguez Sánchez. 2018. “Estimation of construction and demolition waste in building energy efficiency retrofitting works of the vertical envelope.” J. Cleaner Prod. 172 (Jan): 2978–2985. https://doi.org/10.1016/j.jclepro.2017.11.113.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Mar 14, 2018
Accepted: Aug 9, 2018
Published online: Dec 28, 2018
Published in print: Mar 1, 2019
Discussion open until: May 28, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.